Command Loss Timer Reset
   HOME

TheInfoList



OR:

Command Loss Timer Resets are part of the
CCSDS The Consultative Committee for Space Data Systems (CCSDS) was founded in 1982 for governmental and quasi-governmental space agencies to discuss and develop standards for space data and information systems. Currently composed of "eleven member agenc ...
communications system to spacecraft either in Earth orbit or beyond Earth orbit. The Command Loss Timer Reset, if it is not received in a timely manner by the spacecraft, generally forces the spacecraft to engage in safety and self-protection procedures. * Command Loss Timer Reset systems involve both hardware and software, whereas watchdog timers are essentially hardware-only affairs. * Most spacecraft have more than one Command Loss Timer Reset for subsystem level safety reasons, with the Voyager craft using at least 7 of these timers. * Technically the Command Loss Timer Reset is a glorified array of
Watchdog timer A watchdog timer (sometimes called a ''computer operating properly'' or ''COP'' timer, or simply a ''watchdog'') is an electronic or software timer that is used to detect and recover from computer malfunctions. Watchdog timers are widely used in ...
s, each with different settings. Overall spacecraft safety is very important for missions of multi-year duration. This means that the Command Loss Timer Reset subsystem has to be used to avoid multiple computer reboot events. Generally speaking, when a computer reboots it decreases the overall safety of the spacecraft for a very brief time.


General concepts

The Command Loss Timer Reset can be used for computer system rebooting, but only when multiple timers have not been reset—like the classical "
Dead man's switch A dead man's switch (see alternative names) is a switch that is designed to be activated or deactivated if the human operator becomes incapacitated, such as through death, loss of consciousness, or being bodily removed from control. Originally a ...
" of industrial transport use. Embedded systems need to be inherently self-reliant, as this is fundamentally part of their design. Embedded systems (like those on spacecraft) can't be constantly watched by a human. It is simply not possible to wait for someone to reboot the embedded system if the software or hardware hangs. * Embedded designs, such as robotic spacecraft, are simply not accessible to human operators by any means but command telemetry for 99.9% of their expected mission life. * If spacecraft software or hardware ever hangs, the spacecraft would in essence be permanently disabled. The Command Loss Timer Reset subsystem acts to partly resolve hardware-software problems in Solar System or Earth orbital operating conditions.


In actual use


Other uses

The Command Loss Timer Reset is not strictly limited to spacecraft, as any scientific instrument that is in a situation where remote command could be lost could use this safety measure. This feature is common with devices connected over the Internet, but not all Internet connected devices use it.


See also

*
Safe mode (spacecraft) Safe mode is an operating mode of a modern unmanned spacecraft during which all non-essential systems are shut down and only essential functions such as thermal management, radio reception and attitude control are active. Safe mode is entered auto ...


References


External links

Every report indicated how many CTLRs were sent and how many were received. So far this is the only NASA mission to indicate this aspect of spacecraft health.
Voyager Weekly Mission Reports


{{CCSDS Consultative Committee for Space Data Systems