Colt Commando

The Colt Automatic Rifle-15 or CAR-15 is a family of M16 rifle–based firearms marketed by Colt in the 1960s and early 1970s. However, the term "CAR-15" is most commonly associated with the Colt Commando (AKA: XM177); these select-fire carbines have ultrashort and barrels with over-sized flash suppressors.

The CAR-15 name was an attempt to re-associate the AR-15 name with Colt, since the AR initially stood for ArmaLite, the original manufacturer of the ArmaLite AR-15. Colt later abandoned the CAR-15 concept, but continued to make carbine variations, using the " M16" brand for select-fire models and the "Colt AR-15" brand for semi-automatic models. However, in present usage, "CAR-15" is the generic name for all carbine-length variants made before the M4 carbine.

History

Starting in 1965, Colt attempted to market the M16 rifle as a Modular Weapon System. By using various upper assemblies, buttstocks, and pistol grips, the weapon could be configured as assault rifles, carbines, submachine guns, open-bolt squad automatic weapons and a survival rifle version. Belt-fed light machine guns were also developed under the CAR-15 banner, although they have little in common with the M16 rifle. However, the U.S. military only made significant purchases of the Rifle and Commando versions, so Colt abandoned the CAR-15 family concept. The "CAR-15 Rifle" was already identified by most users as the M16 rifle, and "CAR-15" was similarly associated with the short-barreled Colt Submachine Gun and Commando models. Because of that, the term "CAR-15" has been used to describe any M16-based carbine, even if the particular weapon is not officially named this.

Colt Automatic Rifle-15 family

CAR-15 Rifle (AKA: M16 rifle)

The ''Model 603'' CAR-15 Rifle, adopted initially by the United States Army as the XM16E1 and then later as the M16A1, and the ''Model 604'' CAR-15 Rifle, adopted by the United States Air Force as the M16, formed the core of the CAR-15 family. However, the United States military had already committed to purchases before Colt created the concept of the CAR-15 weapons system. The principal difference between the ''Model 603'' and ''Model 604'' is that the former has a forward assist, allowing a user to manually close a stuck bolt.

CAR-15 Heavy Assault Rifle M1

The CAR-15 Heavy Assault Rifle M1 was a heavy-barreled version of the standard AR-15 with a bipod attachment, intended for use as a Squad Automatic Weapon (SAW). It was designed to feed from 30-round box magazines.

CAR-15 Heavy Assault Rifle M2

The CAR-15 Heavy Assault Rifle M2 was a belt-fed conversion of the standard CAR-15, with a heavy barrel and bipod attachment. It was made in prototype form only and saw no sales.

CAR-15 Carbine

The ''Model 605A'' CAR-15 Carbine was a shortened version for situations where longer weapons could be unwieldy, such as aboard vehicles or helicopters. It was an improved version of the AR-15 SBR, which was a shorter barrel version of the Colt Armalite AR-15. The only significant change from the M16 rifle was that the barrel was shortened to in length, so that it ended just forward of the front sight base. Because of the shorter barrel, no bayonet mounting lugs were provided. One prototype used a shorter handguard and a long barrel.

The ''Model 605B'' had no forward assist, but had a four-position selector switch (developed by Foster Sturtevant in December 1966) so that a user could select safe, semi-automatic, three-round burst, or full automatic modes of fire. Unlike the standard three-position group, the four-position group went from (going clockwise from the 9 o'clock position) safe, fully automatic, semi-automatic and finally burst. The selector itself had 360 degrees of motion, and could be moved either clockwise or counterclockwise, unlike with standard groups. Instead of three-round burst, the burst cam could be modified to two-round or six-round burst. Both versions used the rifle-length buttstock.

As early as 1964, United States Navy SEALs were using the CAR-15 Carbine.

CAR-15 Submachine Gun (AKA: CAR-15 Model 607)

In late 1959, Colt introduced a Tanker Model of the AR-15. It was the first AR-15 made with a retractable buttstock, with its overall length being only with the buttstock retracted. The retractable buttstock resembled a shortened version of the fixed buttstock, but a two-position latch recessed in the back allowed it to be extended and locked into position, increasing the length of pull by . The barrel is too short to mount a bayonet, so the SMG had no bayonet lug.
In 1965, Colt introduces the new ''Model 607'' CAR-15 Submachine Gun (SMG), which is an improved version of the Colt Armalite AR-15 Tanker Model with some modifications from the M16. It was a compact weapon for use by special forces and vehicle crewmen. The dictionary definition of submachine gun is an automatic firearm that fires pistol-caliber cartridges. However, manufacturers such as Colt, Heckler & Koch, and Zastava Arms have referred to compact carbines as submachine guns, to emphasize their short length and to differentiate them from longer carbines.

About 50 CAR-15 SMGs were made. Most were issued to Navy SEALs and Army Special Forces, though some were also given to Army K-9 units. Since it never went into full production, CAR-15 SMGs were assembled from available spare parts. The first models were made with M16 receivers without forward assists and with shortened pistol grips from the Survival Rifle (see below). The later ''Model 607A'' was made with XM16E1 receiver with forward assist and standard pistol grip. The handguard was made from full-length rifle handguard by cutting it in half and using either the fore or aft pair, after machining the ends to fit the slip ring and handguard cap.

Because of the short barrel, the CAR-15 SMGs suffered from a loud and bright muzzle blast, and a number of muzzle devices were developed to reduce this. The SMGs were initially fitted with the standard M16 rifle's "duckbill" or three-prong flash hiders, which did not alleviate the problem. In September 1966, Colt developed a long moderator that lessened the noise and muzzle flash, which also increased the weapon's reliability by increasing the amount of back pressure. However, the moderator created its own problems, such as heavy bore fouling and causing tracer bullets to wildly yaw. A long moderator with six slots and an expansion chamber, which further reduced noise and flash, replaced the previous muzzle device and became standard for the SMG and the Commando series, but fouling and tracer problems persisted.

Colt Commando (AKA: CAR-15, XM177 & GAU-5)

The Colt Commando was not initially part of the CAR-15 Military Weapons System, but was added in 1966 in response to the US military's desire for a shorter M16 and without the ''Model 607'' SMG's inadequacies. Colt engineer Rob Roy designed a simpler two-position telescoping tubular aluminum buttstock to replace the complicated extending triangular version. The fragile and ad hoc triangular handguards were replaced by reinforced round handguards. Each half of the round handguard is identical, simplifying logistics by not requiring a top/bottom or left/right pair. The ''Model 609'' Commando has a forward assist, while the ''Model 610'' Commando does not. A ''Model 610B'' with a four-position selector was available, but not used by the U.S. military. All versions are equipped with the long moderator.

The XM177 uses a unique flash suppressor sometimes called a flash or sound moderator for its barrel. This device is long and was designed primarily as a counterbalance measure as the shorter barrel makes the weapon unwieldy. This device reduces flash signature greatly and sound signature slightly, making the normally louder short barreled carbine sound like a longer barreled M16A1. Although it has no internal baffles and does not completely reduce the sound signature to subsonic levels, because it alters the sound level of the weapon, the US Bureau of Alcohol Tobacco Firearms and Explosives has declared this muzzle device to be a sound suppressor and regulates its civilian purchase in the United States.

The ''Model 610'' was classified as the ''XM177''Ezell, 1988. p. 401 but adopted by the Air Force as the ''GAU-5/A'' Submachine Gun (GA denoting an automatic gun and U a complete unit rather than a parts kit: the popular "gun aircraft unit" and "gun automatic unit" explanations are backronyms). The Army purchased 2,815 ''Model 609'' CAR-15 Commandos on June 28, 1966, which were officially designated Submachine Gun, 5.56 mm, ''XM177E1''. As part of the contract, Colt was supposed to supply each XM177E1s with seven 30-round magazines, but Colt was unable to build a reliable 30-round curved magazine that would fit in the M16 magazine well, so most XM177E1s were shipped with 20-round magazines. The exception was 5th Special Forces Group, who received a total of four early 30-round magazines. Colt completed delivery of the purchased XM177E1s in March 1967.

In 1967, in response to field testing, Colt lengthened the Commando's barrel from . The increased length reduced noise and muzzle flash, and allowed fitting of the Colt XM148 grenade launcher. A metal boss was added to the moderator for mounting of the XM148 and rifle grenades. The chambers were chrome-plated. The Commandos with the longer barrels were called the ''Model 629'' and ''Model 649''. The ''Model 629'' Commando has a forward assist; the ''Model 649'' Commando does not.

In April 1967, the Army purchased 510 ''Model 629'' Commandos for use by troops assigned to the Military Assistance Command, Vietnam Studies and Observations Group (MACV-SOG), and designated them ''XM177E2''. Delivery was completed by the end of September 1967. The Air Force adopted a similar model without the forward assist feature as the ''GAU-5A/A''. Sources debate whether or not this was a Colt ''Model 630'' or ''Model 649''. According to John Plaster and other sources, the lack of 30-round magazines continued to be problematic and SOG operators resorted to pooling their personal resources and purchasing the larger capacity magazines on the civilian U.S. market. Problems with range, accuracy, barrel fouling, and usage of tracer bullets continued to plague the XM177 series, but Colt estimated that it would take a six-month $400,000 program to do a complete ballistic and kinematic study. There were also recommendations for a 29-month $635,000 research and development program. Both recommendations were declined by the U.S. military as American ground force involvement in the Vietnam War was gradually winding down. Production of the CAR-15 Commando ended in 1970.

CAR-15 Survival Rifle

The ''Model 608'' CAR-15 Survival Rifle was meant for use by downed aircrew. Because of the CAR-15's modular design, the Survival Rifle could be broken down into two subassemblies and stowed with four 20-round magazines in a pilot's seat pack. Resembling a Colt Commando, it also has a barrel and is in overall length when assembled. The Survival Rifle used a fixed tubular plastic-coated aluminum buttstock and a round handguard that were not used on the other CAR-15 versions, and did not have either a forward assist or a bayonet lug. The pistol grip was chopped down, and the muzzle was equipped with either a conical flash hider or the long moderator.

Post-Vietnam

After the Vietnam War, Colt abandoned the CAR-15 Modular Weapon System concept, but continued to develop short barrel carbines. These were marketed as " M16s", while the civilian and law-enforcement semi-automatic counterparts were marketed as "Colt AR-15s". Although, they were all commonly called CAR-15s.

M16 Carbine (AKA: CAR-15)

In the early 1970s, Colt began development of an M16 carbine with a long pencil barrel. The barrel length was compatible with the existing carbine-length gas system and allowed for the mounting of a standard M16 bayonet. Despite having a longer barrel, it's no longer than the Colt Commando, as the longer barrel did not require the long 4.5 inch moderator of the XM177 series, only the much shorter M16 birdcage-type flash hider. Colt labeled the M16 carbines the ''Model 651'', ''652'', ''653'', or ''654'', depending on whether or not it had a fixed or retractable buttstock, or a forward assist. Only the ''Model 653'' M16A1 carbine, with retractable buttstock and forward assist would be purchased in significant numbers by the U.S. military. The Malaysian Armed Forces and the Armed Forces of the Philippines, purchased Model 653s in small numbers for special operations forces or security forces.

GUU-5/P

The GUU-5/P was a result of United States Air Force making ad-hoc upgrades to its GAU-5 series. The barrels and flash suppressor were replaced with the longer barrel with a 1-in-12 twist, but the weapons retained their original designations. With the change to M855 cartridges, they either received 1-in-7 twist barrel or complete upper receiver assembly replacements. The GAU-5s markings were also removed and the weapons were re-stamped ''GUU-5/P''. These were used by the British Special Air Service during the Falklands War.

M4 carbine

In the early 1980s, at the request of the United States Marine Corps, Colt upgraded the M16A1 rifle, resulting in the M16A2 rifle. Among the major changes were a reinforced lower receiver, a case deflector, a birdcage flash suppressor redesigned to be a muzzle brake, and a barrel with a faster 1-in-7 twist. The faster barrel was necessitated by the switch from the 55-grain M193 bullet to the 62-grain M855 bullet. The M16A2 rifle's barrel was also thicker for the portion in front of the handguard. Colt incorporated these changes into its carbines, which it called M16A2 carbines. The ''Model 723'' M16A2 carbine used the iron sights of the M16A1, but had a case deflector. The barrel had a 1-in-7 twist, but the thinner profile of the older M16A1 carbine's barrel. As with the Model 653, the United States military made small purchases of the Model 723 for its special operation forces. It was notably used by Delta Force operators from the late 1980s to the early 1990s.

In 1983, Diemaco developed a carbine similar to the Model 723, the '' C8 carbine'' for use by the Canadian Forces. The original C8s were built by Colt as the ''Model 725''. In 1984, the U.S. government asked Colt to develop a carbine with maximum commonality with the issue M16A2. Colt named the carbine as the ''XM4''. The project would eventually culminate in the development and official adoption of the M4 carbine in 1994.

M4 Commando

Though Colt has focused its attention on carbines with barrels and rifles with barrels, Colt continues to make carbines with barrels, which it calls Commandos. Originally, Commandos were assembled from whatever spare parts were available, so ''Model 733'' Commandos could have A1-style upper receivers with case deflectors or A2-style upper receivers, and M16A1-profile 1:7 or M16A2-profile 1:7 barrels. Depending on the specific models, Commandos may have had three-position fire control groups (safe/semi-automatic/three-round burst), or four-position having both full-automatic and burst. The modern Model 933 has a "flattop" receiver, with a removable carrying handle and a MIL-STD-1913 Picatinny rail, with semi-automatic and automatic fire. The ''Model 935'' Commando has the features of the Model 933, but has three-round burst fire instead of automatic. Though originally called the M16A2 Commando, Colt now markets them as the ''M4 Commando''.

The M4 Commando with its short barrel suffers the same failings as its predecessors: a substantially lower muzzle velocity and greater muzzle flash, in comparison to longer M16 rifles and carbines. The lower muzzle velocity can reduce carbines' wounding effects. However, United States Marine Corps Force Reconnaissance personnel sometimes used M4 Commandos in place of their M9 pistols. United States Army Special Operations Command Groups also use M4 Commandos as self-defense weapons. United States Navy SEALs use the ultra-compact Mk 18 Mod 0 with its barrel in a similar role.

GAU-5A Aircrew Self Defense Weapon

In 2019, a solution to give a personal firepower upgrade over the traditional sidearm for US aircrews in ACES ejection seat–equipped aircraft was to use commercially available AR-15 rifle parts including a special short quick-release barrel, collapsible stock, folding pistol-grip, and four magazines to fit inside the survival kit pan of the ejection seat. Major Gibson, an Air Force spokesperson, said, “This has driven the dimension of 16 x 14 x 3.5 inches.” The Aircrew Self Defense Weapon is to be included in survival kits for A-10, B-1, B-2, B-52, F-15C, F-15E, F-16, and F-22 aircraft. The rifle is being built at U.S. Air Force Gunsmith Shop at Joint Base San Antonio-Lackland, Texas. 2,137 GAU-5A ASDWs are planned.

Gallery

File:Two 1st Cav LRP teams.jpg, Two 1st Cavalry Division Long Range Reconnaissance Patrol teams, Quang Tri, Vietnam, armed in part with CAR-15s, in July 1968.
File:USAFSecurity.jpg, USAF Staff Sergeant with a GAU-5/A converted to a GUU-5/P and fitted with a Blank Firing Adaptor (BFA) for firing blanks.
File:Navy SEAL.JPEG, The U.S. Navy SEAL in the foreground is carrying a field radio and is armed with a Colt Model 653 carbine equipped with an M203 grenade launcher.
File:Malaysian soldiers.jpg, A Malaysian Army operative (left) holding the M16A1 carbine.
File:Flickr - Israel Defense Forces - Soldier Participates in the IDF Combat Fitness Competition, Nov 2010.jpg, IDF soldier firing a Colt Model 653 with MEPRO 21 reflex sight.
File:Flickr - Israel Defense Forces - Home Front Command's Shavit Company Drill (2).jpg, Model 653 Carbines in the IDF.
File:US Navy 050312-N-5781F-010 Aviation Ordnanceman 1st Class Brian Fitzgerald, right, assigned to Explosive Ordnance Disposal Mobile Unit Five (EODMU-5), checks his weapon before heading out to a target area during jungle warfare.jpg, US Navy EOD ordnanceman with a Colt Model 727 carbine.
File:SAJ ACUPAT camo.jpg, Serbian SAJ police, the one in the center holding a Colt Model 933 while the one on the left holds a SIG SG 552.
File:US Navy 080910-N-0373Q-051 Members of Explosive Ordnance Disposal Mobile Unit (EOD MU) 12 man the firing line (CAR-15 crop).jpg, Example of a M16A1-type carbine modified with a rail interface system handguard to support Picatinny rail-compatible sights and accessories.
File:US Navy 081107-N-0411D-017 Senior Chief Mass Communication Specialist Andrew McKaskle guides Mass Communication Specialist 2nd Class Herbert Banks in a tactical shooting portion of firing range training.jpg, Example of a M16A2-type carbine modified with a rail interface system handguard to support Picatinny rail-compatible sights and accessories.

See also

* Colt Automatic Rifle
* AKS-74U - Soviet/Russian counterpart
* QBZ-95B - Chinese counterpart
* Comparison of the AK-47 and M16

References

Further reading

*
*
* Ezell, Edward. ''Small Arms Today, 2nd Edition.'' Harrisburg, PA: Stackpole Books, 1988. .
* Gervasi, Tom. ''Arsenal of Democracy III: America's War Machine, the Pursuit of Global Dominance''. New York, NY: Grove Press, Inc, 1984. .
* Plaster, John. ''Secret Commandos: Behind Enemy Lines with the Elite Warriors of SOG'' Penguin Books, 2004.
*
*
*
*
*

External links

"Colt XM177 5.56mm Submachine Gun" – Warboats.orgU.S. SUBMACHINE GUN XM177 – Springfield Armory CollectionRetro Black Rifle.com – Guide to AR10/AR15/M16 Rifles up to the mid-1980s

{{DEFAULTSORT:Car-15
Colt rifles
Submachine guns of the United States
Cold War firearms of the United States
Rifles of the United States
Carbines
5.56 mm firearms
Military equipment introduced in the 1960s
ArmaLite AR-10 derivatives