Code Excited Linear Prediction
   HOME

TheInfoList



OR:

Code-excited linear prediction (CELP) is a linear predictive speech coding algorithm originally proposed by Manfred R. Schroeder and
Bishnu S. Atal Bishnu S. Atal (born 1933) is an Indian physicist and engineer. He is a noted researcher in acoustics, and is best known for developments in speech coding. He advanced linear predictive coding (LPC) during the late 1960s to 1970s, and developed ...
in 1985. At the time, it provided significantly better quality than existing low bit-rate algorithms, such as
residual-excited linear prediction Residual-excited linear prediction (RELP) is an obsolete speech coding algorithm. It was originally proposed in the 1970s and can be seen as an ancestor of code-excited linear prediction (CELP). Unlike CELP however, RELP directly transmits the resid ...
(RELP) and linear predictive coding (LPC) vocoders (e.g., FS-1015). Along with its variants, such as
algebraic CELP Algebraic code-excited linear prediction (ACELP) is a speech coding algorithm in which a limited set of pulses is distributed as excitation to a linear prediction filter. It is a linear predictive coding (LPC) algorithm that is based on the code- ...
, relaxed CELP,
low-delay CELP G.728 is an ITU-T standard for speech coding operating at 16  kbit/s. It is officially described as ''Coding of speech at 16 kbit/s using low-delay code excited linear prediction''. Technology used is LD-CELP, low-delay code excited linear pre ...
and vector sum excited linear prediction, it is currently the most widely used speech coding algorithm. It is also used in MPEG-4 Audio speech coding. CELP is commonly used as a generic term for a class of algorithms and not for a particular codec.


Background

The CELP algorithm is based on four main ideas: * Using the source-filter model of speech production through linear prediction (LP) (see the textbook "speech coding algorithm"); * Using an adaptive and a fixed codebook as the input (excitation) of the LP model; * Performing a search in closed-loop in a "perceptually weighted domain". * Applying vector quantization (VQ) The original algorithm as simulated in 1983 by Schroeder and Atal required 150 seconds to encode 1 second of speech when run on a
Cray-1 The Cray-1 was a supercomputer designed, manufactured and marketed by Cray Research. Announced in 1975, the first Cray-1 system was installed at Los Alamos National Laboratory in 1976. Eventually, over 100 Cray-1s were sold, making it one of the ...
supercomputer. Since then, more efficient ways of implementing the codebooks and improvements in computing capabilities have made it possible to run the algorithm in embedded devices, such as mobile phones.


CELP decoder

Before exploring the complex encoding process of CELP we introduce the decoder here. Figure 1 describes a generic CELP decoder. The excitation is produced by summing the contributions from fixed (a.k.a. stochastic or innovation) and adaptive (a.k.a. pitch) codebooks: :e e_f e_a , where e_ /math> is the fixed (a.k.a. stochastic or innovation) codebook contribution and e_ /math> is the adaptive ( pitch) codebook contribution. The fixed codebook is a vector quantization dictionary that is (implicitly or explicitly) hard-coded into the codec. This codebook can be algebraic ( ACELP) or be stored explicitly (e.g. Speex). The entries in the adaptive codebook consist of delayed versions of the excitation. This makes it possible to efficiently code periodic signals, such as voiced sounds. The filter that shapes the excitation has an all-pole model of the form 1/A(z), where A(z) is called the prediction filter and is obtained using linear prediction ( Levinson–Durbin algorithm). An all-pole filter is used because it is a good representation of the human vocal tract and because it is easy to compute.


CELP encoder

The main principle behind CELP is called analysis-by-synthesis (AbS) and means that the encoding (analysis) is performed by perceptually optimizing the decoded (synthesis) signal in a closed loop. In theory, the best CELP stream would be produced by trying all possible bit combinations and selecting the one that produces the best-sounding decoded signal. This is obviously not possible in practice for two reasons: the required complexity is beyond any currently available hardware and the “best sounding” selection criterion implies a human listener. In order to achieve real-time encoding using limited computing resources, the CELP search is broken down into smaller, more manageable, sequential searches using a simple perceptual weighting function. Typically, the encoding is performed in the following order: * Linear prediction coefficients (LPC) are computed and quantized, usually as line spectral pairs (LSPs). * The adaptive (pitch) codebook is searched and its contribution removed. * The fixed (innovation) codebook is searched.


Noise weighting

Most (if not all) modern audio codecs attempt to shape the coding noise so that it appears mostly in the frequency regions where the ear cannot detect it. For example, the ear is more tolerant to noise in parts of the spectrum that are louder and vice versa. That's why instead of minimizing the simple quadratic error, CELP minimizes the error for the ''perceptually weighted'' domain. The weighting filter W(z) is typically derived from the LPC filter by the use of bandwidth expansion: :W(z) = \frac where \gamma_1 > \gamma_2.


See also

* MPEG-4 Part 3 (CELP as an MPEG-4 Audio Object Type) *
G.728 G.728 is an ITU-T standard for speech coding operating at 16  kbit/s. It is officially described as ''Coding of speech at 16 kbit/s using low-delay code excited linear prediction''. Technology used is LD-CELP, low-delay code excited linear pre ...
– Coding of speech at 16 kbit/s using low-delay code excited linear prediction * G.718 – uses CELP for the lower two layers for the band (50–6400 Hz) in a two-stage coding structure *
G.729.1 G.729.1 is an 8-32 kbit/s embedded speech and audio codec providing bitstream interoperability with G.729, G.729 Annex A and G.729 Annex B. Its official name is ''G.729-based embedded variable bit rate codec: An 8-32 kbit/s scalable wideband code ...
– uses CELP coding for the lower band (50–4000 Hz) in a three-stage coding structure *
Comparison of audio coding formats The following tables compare general and technical information for a variety of audio coding formats. For listening tests comparing the perceived audio quality of audio formats and codecs, see the article Codec listening test. General informati ...
*
CELT The Celts (, see pronunciation for different usages) or Celtic peoples () are. "CELTS location: Greater Europe time period: Second millennium B.C.E. to present ancestry: Celtic a collection of Indo-European peoples. "The Celts, an ancient ...
is a related audio codec that borrows some ideas from CELP.


References

* B.S. Atal, "The History of Linear Prediction," ''IEEE Signal Processing Magazine'', vol. 23, no. 2, March 2006, pp. 154–161. * M. R. Schroeder and B. S. Atal, "Code-excited linear prediction (CELP): high-quality speech at very low bit rates," in ''Proceedings of the IEEE International Conference on Acoustics, Speech, and Signal Processing'' (ICASSP), vol. 10, pp. 937–940, 1985.


External links

* This article is based on
paper
presented a
Linux.Conf.Au
* Some parts based on the Speex code
manual


of CELP 1016A (CELP 3.2a) and LPC 10e.

h2>

Selected readings




Speech Processing: Theory of LPC Analysis and Synthesis
{{Compression formats Speech codecs