Canon FL refers to a

lens mount A lens mount is an interface – mechanical and often also electrical – between a photographic camera body and a lens. It is a feature of camera systems where the body allows interchangeable lenses, most usually the rangefinder camera, sin ...

standard for

35mm 35 mm may refer to: * 135 film, a type of still photography format commonly referred to as 35 mm film * 35 mm movie film 35 mm film is a film gauge used in filmmaking, and the film standard. In motion pictures that record on fi ...

single-lens reflex camera A single-lens reflex camera (SLR) is a camera that typically uses a mirror and prism system (hence "reflex" from the mirror's reflection) that permits the photographer to view through the lens and see exactly what will be captured. With twin l ...

s from

Canon Canon or Canons may refer to: Arts and entertainment * Canon (fiction), the conceptual material accepted as official in a fictional universe by its fan base * Literary canon, an accepted body of works considered as high culture ** Western ca ...

. It was introduced in April 1964 with the

Canon FX The Canon FX is a 35 mm SLR manufactured by Canon Inc. of Japan and introduced in April 1964. It introduced the Canon FL lens mount, the successor to the Canon R. The camera has a built-in lightmeter using a CdS photocell mounted on the ph ...

camera, replacing the previous Canon R lens mount. The FL mount was in turn replaced in 1971 by the

Canon FD lens mount The Canon FD lens mount is a physical standard for connecting a photographic lens to a 35mm single-lens reflex camera body. The standard was developed by Canon of Japan and was introduced in March 1971 with the Canon F-1 camera. It served as t ...

. FL lenses can also be used on FD-mount cameras. Many mirrorless interchangeable-lens cameras are able to use Canon FL lenses via an

adapter An adapter or adaptor is a device that converts attributes of one electrical device or system to those of an otherwise incompatible device or system. Some modify power or signal attributes, while others merely adapt the physical form of one c ...

FL cameras

(1964) * Canon FP (1964) *

Canon Pellix The Canon Pellix is a manual-focus single-lens reflex (SLR) camera released in 1965 that uses a stationary half-silvered mirror behind which a metering cell is raised during light level metering. The First Canon with TTL Canon suddenly switched ...

(1965) * Canon FT QL (1966) * Canon Pellix QL (1966) * Canon TL (1968)

FL lenses

Rear of Canon FL 28mm Lens and Super-Canomatic Lens R 50mm

Zoom

Wide-angle (under 50mm)

Standard (50–60mm)

Source: Canon released 3 'levels' of standard lenses (exc. macro). The f/1.8 lenses were small and lightweight, f/1.4 were mid-range, and the f/1.2 were professional level (top of their line).

Telephoto (above 60mm)

Notes

# The FL 19mm F3.5 (not the 19mm F3.5 R) was a true wide angle (short focus) lens. Its rear projected far into the mirror box on an SLR, and because of this, it could only be used on a camera with mirror lock-up (FP, FX, FT, F-1 (old), FTb, EF). It could not be used on either Pellix model. # The FL P 38mm F2.8 also projected into the mirror box. It was specially designed for the Pellix and could not be used on any other camera because the moving mirror would hit the rear of the lens. This lens had a longer lens mount index (the pin on the back or the lens at the top), that only fit the deeper cutout at the top of the Pellix's lens mount, thus making it impossible to mount this lens on any other camera. # the FL M 100mm F4 was a special purpose bellows lens. It could only be used when mounted on a bellows, such as the Bellows FL, because it lacked a focusing ring. # The list ''is'' complete.

References

External links

Description website of Canon FL lenses

List of all Canon FL lenses with technical specifications
{{Canon Canon FL cameras Canon FL lenses Lens mounts