Lufthansa Airbus A319 landing at Split Airport

A conventional take-off and landing (CTOL), also known as horizontal take-off and landing (HTOL) is the process whereby conventional

fixed-wing aircraft A fixed-wing aircraft is a heavier-than-air flying machine, such as an airplane, which is capable of flight using wings that generate lift caused by the aircraft's forward airspeed and the shape of the wings. Fixed-wing aircraft are dist ...

(such as passenger aircraft) take off and

land Land, also known as dry land, ground, or earth, is the solid terrestrial surface of the planet Earth that is not submerged by the ocean or other bodies of water. It makes up 29% of Earth's surface and includes the continents and various isla ...

, involving the use of

runway According to the International Civil Aviation Organization (ICAO), a runway is a "defined rectangular area on a land aerodrome prepared for the landing and takeoff of aircraft". Runways may be a man-made surface (often asphalt, concrete ...

s. During takeoff, the aircraft will accelerate along the runway, resting on its wheels, until its

takeoff Takeoff is the phase of flight in which an aerospace vehicle leaves the ground and becomes airborne. For aircraft traveling vertically, this is known as liftoff. For aircraft that take off horizontally, this usually involves starting with a ...

speed is reached, at which point the pilot manipulates the flight controls to make the aircraft pivot around the axis of its main

landing gear Landing gear is the undercarriage of an aircraft or spacecraft that is used for takeoff or landing. For aircraft it is generally needed for both. It was also formerly called ''alighting gear'' by some manufacturers, such as the Glenn L. Mart ...

while still on the ground, this increases the lift from the

wing A wing is a type of fin that produces lift while moving through air or some other fluid. Accordingly, wings have streamlined cross-sections that are subject to aerodynamic forces and act as airfoils. A wing's aerodynamic efficiency is e ...

s and effects takeoff. During

landing Landing is the last part of a flight, where a flying animal, aircraft, or spacecraft returns to the ground. When the flying object returns to water, the process is called alighting, although it is commonly called "landing", "touchdown" or ...

s, a commercial passenger-carrying aircraft will arrive over the runway while still at flight speed. The landing consists of the

final approach In aeronautics, the final approach (also called the final leg and final approach leg) is the last leg in an aircraft's approach to landing, when the aircraft is lined up with the runway and descending for landing.Crane, Dale: ''Dictionary of ...

phase, the

flare A flare, also sometimes called a fusée, fusee, or bengala in some Latin-speaking countries, is a type of pyrotechnic that produces a bright light or intense heat without an explosion. Flares are used for distress signaling, illumination, ...

, the touchdown, and roll-out phase.

Seaplane A seaplane is a powered fixed-wing aircraft capable of taking off and landing (alighting) on water.Gunston, "The Cambridge Aerospace Dictionary", 2009. Seaplanes are usually divided into two categories based on their technological characteri ...

s, instead of using runways, use water.

References

Types of take-off and landing {{aviation-stub

See also

References