Bright spot
   HOME

TheInfoList



OR:

In reflection seismology, a bright spot is a local high amplitude seismic attribute anomaly that can indicate the presence of
hydrocarbons In organic chemistry, a hydrocarbon is an organic compound consisting entirely of hydrogen and carbon. Hydrocarbons are examples of group 14 hydrides. Hydrocarbons are generally colourless and hydrophobic, and their odors are usually weak or e ...
and is therefore known as a direct hydrocarbon indicator. It is used by
geophysicists Geophysics () is a subject of natural science concerned with the physical processes and physical properties of the Earth and its surrounding space environment, and the use of quantitative methods for their analysis. The term ''geophysics'' so ...
in
hydrocarbon exploration Hydrocarbon exploration (or oil and gas exploration) is the search by petroleum geologists and geophysicists for deposits of hydrocarbons, particularly petroleum and natural gas, in the Earth using petroleum geology. Exploration methods Vis ...
.


History

Bright spots were not commonly identified until the early 1970s because of the extensive and industry-wide use of automatic gain control, which obscured the amplitude effects of hydrocarbon accumulations.


Theory

A bright spot primarily results from the increase in
acoustic impedance Acoustic impedance and specific acoustic impedance are measures of the opposition that a system presents to the acoustic flow resulting from an acoustic pressure applied to the system. The SI unit of acoustic impedance is the pascal-second per cu ...
contrast when a hydrocarbon (with a lower acoustic impedance) replaces the brine-saturated zone (with a higher acoustic impedance) that underlies a shale (with a higher acoustic impedance still), increasing the reflection coefficient. The effect decreases with depth because compaction for sands and shales occurs at different rates and the acoustic impedance relationship stated above will not hold after a certain depth/age. Below this depth, there will be a crossover of shale and sand acoustic impedances and a dim spot is more useful to hydrocarbon exploration.


Caution

The relationship between hydrocarbons and direct hydrocarbon indicators, such as bright spots, is not straightforward and not all bright spots are caused by the presence of hydrocarbons and therefore they should not be treated as conclusive evidence of hydrocarbon accumulations.


See also

* Polarity reversal (seismology)


References

{{Reflist *http://www.glossary.oilfield.slb.com/Display.cfm?Term=bright%20spot Schlumberger: Oilfield Glossary *Brown, Alistar. R., (2010), “Dim Spots in Seismic Images as Hydrocarbon Indicators”, AAPG Search and Discovery Article #40514. nline: http://www.searchanddiscovery.com/documents/2010/40514brown/ *Hilterman, Fred J., (2001), “Seismic Amplitude Interpretation”, SEG. Seismology