BAE Systems Mantis on:
[Wikipedia]
[Google]
[Amazon]
The BAE Systems Mantis Unmanned Autonomous System Advanced Concept Technology Demonstrator is a British demonstrator programme for Unmanned Combat Air Vehicle (UCAV) technology. The Mantis is a twin-engine, turboprop-powered UCAV with a wingspan of approximately 22 m, broadly comparable to the MQ-9 Reaper. Other partners involved in Phase 1 of the Mantis programme include the Ministry of Defence (United Kingdom), Rolls-Royce plc, Rolls-Royce, QinetiQ, GE Aviation, Wescam, L-3 Wescam, Meggitt and Lola Cars, Lola.
Development of the Mantis started in late 2007, a mockup being revealed at the 2008 Farnborough Airshow, Farnborough International Air Show. The Phase 1 Mantis vehicle is powered by two Rolls-Royce Model 250 turboprop engines, although this is likely to change in later variants. The Mantis is intended to have at least 24-hour operational endurance and is an Vehicular automation, autonomous vehicle, able to pilot itself and to plot its own course, communicating with personnel on the ground regarding its observations.
Phase 1 is intended to demonstrate BAE Systems' rapid prototyping capabilities and will focus on the evaluation of autonomous control systems. Later phases may evaluate civilian applications, armed variants and sensor packages.
The large dome on the front, reminiscent of a pilot's canopy, actually contains an upward facing satellite communications system.
The prototype first flew on 21 October 2009 at Woomera Test Range in South Australia.
In 2013 the Mantis was flight tested in the United Kingdom. It was used as the basis for the BAE/Dassault Telemos, development of which was discontinued.
Airliners.net photo
{{DEFAULTSORT:Bae Mantis British Aerospace aircraft 2000s British experimental aircraft Unmanned military aircraft of the United Kingdom Medium-altitude long-endurance unmanned aerial vehicles Airborne military robots Low-wing aircraft Twin-engined pusher aircraft Unmanned experimental aircraft
Design and development
Development of the Mantis started in late 2007, a mockup being revealed at the 2008 Farnborough Airshow, Farnborough International Air Show. The Phase 1 Mantis vehicle is powered by two Rolls-Royce Model 250 turboprop engines, although this is likely to change in later variants. The Mantis is intended to have at least 24-hour operational endurance and is an Vehicular automation, autonomous vehicle, able to pilot itself and to plot its own course, communicating with personnel on the ground regarding its observations.
Phase 1 is intended to demonstrate BAE Systems' rapid prototyping capabilities and will focus on the evaluation of autonomous control systems. Later phases may evaluate civilian applications, armed variants and sensor packages.
The large dome on the front, reminiscent of a pilot's canopy, actually contains an upward facing satellite communications system.
The prototype first flew on 21 October 2009 at Woomera Test Range in South Australia.
In 2013 the Mantis was flight tested in the United Kingdom. It was used as the basis for the BAE/Dassault Telemos, development of which was discontinued.
Specifications
See also
References
* *External links
Airliners.net photo
{{DEFAULTSORT:Bae Mantis British Aerospace aircraft 2000s British experimental aircraft Unmanned military aircraft of the United Kingdom Medium-altitude long-endurance unmanned aerial vehicles Airborne military robots Low-wing aircraft Twin-engined pusher aircraft Unmanned experimental aircraft