polymer chemistry Polymer chemistry is a sub-discipline of chemistry that focuses on the structures of chemicals, chemical synthesis, and chemical and physical properties of polymers and macromolecules. The principles and methods used within polymer chemistry ar ...

, an addition polymer is a

polymer A polymer (; Greek '' poly-'', "many" + '' -mer'', "part") is a substance or material consisting of very large molecules called macromolecules, composed of many repeating subunits. Due to their broad spectrum of properties, both synthetic a ...

that forms by simple linking of

monomer In chemistry, a monomer ( ; '' mono-'', "one" + '' -mer'', "part") is a molecule that can react together with other monomer molecules to form a larger polymer chain or three-dimensional network in a process called polymerization. Classification ...

s ''without'' the co-generation of other products. Addition

polymerization In polymer chemistry, polymerization (American English), or polymerisation (British English), is a process of reacting monomer molecules together in a chemical reaction to form polymer chains or three-dimensional networks. There are many f ...

differs from

condensation polymerization In polymer chemistry, condensation polymers are any kind of polymers whose process of polymerization involves a condensation reaction (i.e. a small molecule, such as water or methanol, is produced as a byproduct). Condensation polymers are ...

, which ''does'' co-generate a product, usually water. Addition polymers can be formed by chain polymerization, when the polymer is formed by the sequential addition of monomer units to an active site in a

chain reaction A chain reaction is a sequence of reactions where a reactive product or by-product causes additional reactions to take place. In a chain reaction, positive feedback leads to a self-amplifying chain of events. Chain reactions are one way that sys ...

, or by

polyaddition Polyaddition (or addition polymerisation ) is a polymerization reaction that forms polymers via individual independent addition reactions. Polyaddition occurs as a reaction between functional groups on molecules with low degrees of polymerizat ...

, when the polymer is formed by

addition reaction In organic chemistry, an addition reaction is, in simplest terms, an organic reaction where two or more molecules combine to form a larger one (the adduct).. Addition reactions are limited to chemical compounds that have multiple bonds, such as ...

s between species of all degrees of polymerization. Addition polymers are formed by the addition of some simple monomer units repeatedly. Generally polymers are unsaturated compounds like alkenes, alkalines etc. The addition polymerization mainly takes place in free radical mechanism. The free radical mechanism of addition polymerization completed by three steps i.e. Initiation of free radical, Chain propagation, Termination of chain.

Polyolefins

Many common addition polymers are formed from unsaturated monomers (usually having a C=C double bond). The most prevalent addition polymers are polyolefins, i.e. polymers derived by the conversion of olefins (alkenes) to long-chain alkanes. The

stoichiometry Stoichiometry refers to the relationship between the quantities of reactants and products before, during, and following chemical reactions. Stoichiometry is founded on the law of conservation of mass where the total mass of the reactants equ ...

is simple: :n RCH=CH₂ → CH-CH₂sub>n This conversion can be induced by a variety of

catalyst Catalysis () is the process of increasing the rate of a chemical reaction by adding a substance known as a catalyst (). Catalysts are not consumed in the reaction and remain unchanged after it. If the reaction is rapid and the catalyst recyc ...

s including

free radicals In chemistry, a radical, also known as a free radical, is an atom, molecule, or ion that has at least one unpaired valence electron. With some exceptions, these unpaired electrons make radicals highly chemically reactive. Many radicals spon ...

acids In computer science, ACID ( atomicity, consistency, isolation, durability) is a set of properties of database transactions intended to guarantee data validity despite errors, power failures, and other mishaps. In the context of databases, a ...

carbanions In organic chemistry, a carbanion is an anion in which carbon is trivalent (forms three bonds) and bears a formal negative charge (in at least one significant resonance form). Formally, a carbanion is the conjugate base of a carbon acid: :R3C ...

and

metal complexes A coordination complex consists of a central atom or ion, which is usually metallic and is called the ''coordination centre'', and a surrounding array of bound molecules or ions, that are in turn known as ''ligands'' or complexing agents. Many ...

. Examples of such polyolefins are polyethenes,

polypropylene Polypropylene (PP), also known as polypropene, is a thermoplastic polymer used in a wide variety of applications. It is produced via chain-growth polymerization from the monomer propylene. Polypropylene belongs to the group of polyolefins a ...

, PVC,

Teflon Polytetrafluoroethylene (PTFE) is a synthetic fluoropolymer of tetrafluoroethylene that has numerous applications. It is one of the best-known and widely applied PFAS. The commonly known brand name of PTFE-based composition is Teflon by Chemo ...

Buna rubber Polybutadiene utadiene rubber BRis a synthetic rubber. Polybutadiene rubber is a polymer formed from the polymerization of the monomer 1,3-butadiene. Polybutadiene has a high resistance to wear and is used especially in the manufacture of tir ...

polyacrylate An acrylate polymer (also known as acrylic or polyacrylate) is any of a group of polymers prepared from acrylate monomers. These plastics are noted for their transparency, resistance to breakage, and elasticity. Acrylate polymer is commonly used ...

polystyrene Polystyrene (PS) is a synthetic polymer made from monomers of the Aromatic hydrocarbon, aromatic hydrocarbon styrene. Polystyrene can be solid or foamed. General-purpose polystyrene is clear, hard, and brittle. It is an inexpensive resin pe ...

, and PCTFE.

Copolymers

When two or more types of monomers undergo addition polymerization, the resulting polymer is an addition copolymer.

Saran wrap Saran is a trade name used by S.C. Johnson & Son, Inc. for a polyethylene food wrap. The Saran trade name was first owned by Dow Chemical for polyvinylidene chloride (PVDC), along with other monomers. The formulation was changed to the less ef ...

, formed from polymerization of

vinyl chloride Vinyl chloride is an organochloride with the formula H2C=CHCl. It is also called vinyl chloride monomer (VCM) or chloroethene. This colorless compound is an important industrial chemical chiefly used to produce the polymer polyvinyl chloride (PVC ...

and

vinylidene chloride 1,1-Dichloroethene, commonly called 1,1-dichloroethylene or vinylidene chloride or 1,1-DCE, is an organochloride with the molecular formula CHCl. It is a colorless liquid with a sharp odor. Like most chlorocarbons, it is poorly soluble in water, ...

, is an addition copolymer.

Ring-opening polymerization

Ring-opening polymerization In polymer chemistry, ring-opening polymerization (ROP) is a form of chain-growth polymerization, in which the terminus of a polymer chain attacks cyclic monomers to form a longer polymer (see figure). The reactive center can be radical, anio ...

is an additive process but tends to give condensation-like polymers but follows the stoichiometry of addition polymerization. For example,

polyethylene glycol Polyethylene glycol (PEG; ) is a polyether compound derived from petroleum with many applications, from industrial manufacturing to medicine. PEG is also known as polyethylene oxide (PEO) or polyoxyethylene (POE), depending on its molecular we ...

is formed by opening

ethylene oxide Ethylene oxide is an organic compound with the formula . It is a cyclic ether and the simplest epoxide: a three-membered ring consisting of one oxygen atom and two carbon atoms. Ethylene oxide is a colorless and flammable gas with a faintly sw ...

rings: :HOCH₂CH₂OH + n C₂H₄O → HO(CH₂CH₂O)_{_n+1}H

Nylon 6 Nylon 6 or polycaprolactam is a polymer, in particular semicrystalline polyamide. Unlike most other nylons, nylon 6 is not a condensation polymer, but instead is formed by ring-opening polymerization; this makes it a special case in the compari ...

(developed to thwart the

patent A patent is a type of intellectual property that gives its owner the legal right to exclude others from making, using, or selling an invention for a limited period of time in exchange for publishing an enabling disclosure of the invention."A ...

nylon 6,6 Nylon 66 (loosely written nylon 6-6, nylon 6/6, nylon 6,6, or nylon 6:6) is a type of polyamide or nylon. It, and nylon 6, are the two most common for textile and plastic industries. Nylon 66 is made of two monomers each containing 6 carbon atoms ...

) is produced by addition polymerization, but chemically resembles typical polyamides.

Further contrasts with condensation polymers

One universal distinction between polymerization types is development of molecular weight by the different modes of propagation. Addition polymers form high molecular weight chains rapidly, with much monomer remaining. Since addition polymerization has rapidly growing chains and free monomer as its reactants, and condensation polymerization occurs in step-wise fashion between monomers, dimers, and other smaller growing chains, the effect of a polymer molecule's current size on a continuing reaction is profoundly different in these two cases. This has important effects on the distribution of molecular weights, or

polydispersity In chemistry, the dispersity is a measure of the heterogeneity of sizes of molecules or particles in a mixture. A collection of objects is called uniform if the objects have the same size, shape, or mass. A sample of objects that have an inconsi ...

, in the finished polymer.

Biodegradation

Addition polymers are generally

chemically inert In chemistry, the term chemically inert is used to describe a substance that is not chemically reactive. From a thermodynamic perspective, a substance is inert, or nonlabile, if it is thermodynamically unstable (positive standard Gibbs free en ...

, involving strong C-C bonds. For this reason they are non-biodegradable and difficult to recycle. In contrast, condensation polymers tend to be more readily bio-degradable because their backbones contain weaker bonds.

History

The first useful addition polymer was made by accident in 1933 by ICI chemists Reginald Gibson and

Eric Fawcett Eric Fawcett (23 August 1927 – 2 September 2000), was a professor of physics at the University of Toronto for 23 years. He also co-founded Science for Peace. Academic and professional life Fawcett began his prestigious career in physics wi ...

. They were carrying out a series of experiments that involved reacting organic compounds under high temperatures and high pressures. They set up an experiment to react ethene with

benzaldehyde Benzaldehyde (C6H5CHO) is an organic compound consisting of a benzene ring with a formyl substituent. It is the simplest aromatic aldehyde and one of the most industrially useful. It is a colorless liquid with a characteristic almond-like odor. ...

in the hope of producing a

ketone In organic chemistry, a ketone is a functional group with the structure R–C(=O)–R', where R and R' can be a variety of carbon-containing substituents. Ketones contain a carbonyl group –C(=O)– (which contains a carbon-oxygen double b ...

. They left the reaction vessel overnight, and the next morning they found a small amount of a white waxy solid. It was shown later that this solid was

polyethylene Polyethylene or polythene (abbreviated PE; IUPAC name polyethene or poly(methylene)) is the most commonly produced plastic. It is a polymer, primarily used for packaging ( plastic bags, plastic films, geomembranes and containers including b ...

. The term "addition polymerization" is deprecated by

IUPAC The International Union of Pure and Applied Chemistry (IUPAC ) is an international federation of National Adhering Organizations working for the advancement of the chemical sciences, especially by developing nomenclature and terminology. It is ...

(International Union of Pure and Applied Chemistry) which recommends the alternative term chain polymerization.

References

*{{cite book, author=Paul J. Flory, title=Principles of Polymer Chemistry, url=https://books.google.com/books?id=CQ0EbEkT5R0C&pg=PA51, accessdate=17 July 2012, year=1953, publisher=Cornell University Press, isbn=978-0-8014-0134-3, page=51 Polymer chemistry Polymerization reactions