An 0-4-6T, in the

Whyte notation Whyte notation is a classification method for steam locomotives, and some internal combustion locomotives and electric locomotives, by wheel arrangement. It was devised by Frederick Methvan Whyte, and came into use in the early twentieth cen ...

for the classification of steam locomotives by

wheel arrangement In rail transport, a wheel arrangement or wheel configuration is a system of classifying the way in which wheels are distributed under a locomotive. Several notations exist to describe the wheel assemblies of a locomotive by type, position, and c ...

, is a locomotive with no

leading wheel The leading wheel or leading axle or pilot wheel of a steam locomotive is an unpowered wheel or axle located in front of the driving wheels. The axle or axles of the leading wheels are normally located on a leading truck. Leading wheels are used ...

s, four driving wheels fixed in a rigid frame, and six

trailing wheel On a steam locomotive, a trailing wheel or trailing axle is generally an unpowered wheel or axle ( wheelset) located behind the driving wheels. The axle of the trailing wheels is usually located in a trailing truck. On some large locomotives, ...

s (normally mounted in a

trailing truck On a steam locomotive, a trailing wheel or trailing axle is generally an unpowered wheel or axle ( wheelset) located behind the driving wheels. The axle of the trailing wheels is usually located in a trailing truck. On some large locomotives, ...

). Examples of this type of locomotive were built by Wilhelm von Engerth.

Equivalent classifications

Other equivalent classifications are: *

UIC classification The UIC classification of locomotive axle arrangements, sometimes known as the German classification''The Railway Data File''. Leicester: Silverdale, 2000. p. 52. . or German system,Kalla-Bishop P.M. & Greggio, Luciano, ''Steam Locomotives'', Cre ...

: B3 (also known as German classification and

Italian classification The UIC classification of locomotive axle arrangements, sometimes known as the German classification''The Railway Data File''. Leicester: Silverdale, 2000. p. 52. . or German system,Kalla-Bishop P.M. & Greggio, Luciano, ''Steam Locomotives'', Cre ...

) *

French classification Under the French classification system for locomotive wheel arrangements, the system is slightly different for steam and electric/diesel vehicles. Steam The French system counts axles, rather than wheels. As with Whyte notation, a conventional r ...

: 023

History

This wheel arrangement was used on Engerth

articulated An articulated vehicle is a vehicle which has a permanent or semi-permanent pivot joint in its construction, allowing it to turn more sharply. There are many kinds, from heavy equipment to buses, trams and trains. Steam locomotives were sometim ...

steam locomotives, widely used on Alpine railways. One early example was ''Genf'' built by

Maschinenfabrik Esslingen Maschinenfabrik Esslingen (ME), was a German engineering firm that manufactured locomotives, tramways, railway wagons, roll-blocks, technical equipment for the railways, (turntables and traversers), bridges, steel structures, pumps and boiler ...

in 1858 for the Swiss Central Railway. Hamilton Ellis, ''The pictorial history of railways,'' Hamlyn, 1968, p.57.

References

4,0-4-6T {{steam-loco-stub