Under the

Whyte notation Whyte notation is a classification method for steam locomotives, and some internal combustion locomotives and electric locomotives, by wheel arrangement. It was devised by Frederick Methvan Whyte, and came into use in the early twentieth cen ...

for the classification of

steam locomotive A steam locomotive is a locomotive that provides the force to move itself and other vehicles by means of the expansion of steam. It is fuelled by burning combustible material (usually coal, oil or, rarely, wood) to heat water in the loco ...

s, 0-2-4 represents the

wheel arrangement In rail transport, a wheel arrangement or wheel configuration is a system of classifying the way in which wheels are distributed under a locomotive. Several notations exist to describe the wheel assemblies of a locomotive by type, position, and c ...

of no

leading wheel The leading wheel or leading axle or pilot wheel of a steam locomotive is an unpowered wheel or axle located in front of the driving wheels. The axle or axles of the leading wheels are normally located on a leading truck. Leading wheels are used ...

s, two powered

driving wheel On a steam locomotive, a driving wheel is a powered wheel which is driven by the locomotive's pistons (or turbine, in the case of a steam turbine locomotive). On a conventional, non-articulated locomotive, the driving wheels are all coupled ...

s on one axle, and four

trailing wheel On a steam locomotive, a trailing wheel or trailing axle is generally an unpowered wheel or axle ( wheelset) located behind the driving wheels. The axle of the trailing wheels is usually located in a trailing truck. On some large locomotives, ...

s on two axles.

History

This is a most unusual wheel arrangement, with the only known examples being three locomotives supplied to the 4ft 6in

Dundee and Newtyle Railway The Dundee and Newtyle Railway opened in 1831 and was the first railway in the north of Scotland. It was built to carry goods between Dundee and the fertile area known as Strathmore; this involved crossing the Sidlaw Hills, and was accomplish ...

J and C Carmichael J and C Carmichael was founded in 1810 at Ward Foundry, Session Street, Dundee, Scotland. The partners were James Carmichael (1776–1853) and his younger brother Charles Carmichael (1782–1843). History The brothers were the sons of George C ...

of Dundee in 1833. These were still in operation in 1847, but may have been scrapped in 1849 when the line was converted to the

standard gauge A standard-gauge railway is a railway with a track gauge of . The standard gauge is also called Stephenson gauge (after George Stephenson), International gauge, UIC gauge, uniform gauge, normal gauge and European gauge in Europe, and SGR in E ...

References

* * {{Whyte types 2,0-2-4