The .222 Remington Magnum was a short-lived commercially produced cartridge derived from the .222 Remington. Originally developed for a US military prototype Armalite

AR-15 An AR-15-style rifle is any lightweight semi-automatic rifle based on the Colt AR-15 design. The original ArmaLite AR-15 is a scaled-down derivative of Eugene Stoner's ArmaLite AR-10 design. The then Fairchild Engine and Airplane Corporation ...

rifle in 1958, the cartridge was not adopted by the military, but was introduced commercially in sporting rifles.

Development

The .222 Remington Magnum was created by lengthening the case and shortening the neck of the highly accurate and very popular .222 Remington cartridge, which dominated varmint and

benchrest shooting Benchrest shooting is a shooting sport discipline in which high-precision rifles are rested on a table or bench — rather than being carried in the shooter's hands — while shooting at paper or steel targets, hence the name "benchrest". B ...

during the 1950s. Case capacity is about 20% greater than that of the .222 Remington, producing moderately higher muzzle velocities. The .222 Remington Magnum served as the basis for the German-developed 5.6×50mm Magnum sporting cartridge.

History

During the late 1950s, ArmaLite and other U.S.

firearm A firearm is any type of gun designed to be readily carried and used by an individual. The term is legally defined further in different countries (see Legal definitions). The first firearms originated in 10th-century China, when bamboo tubes ...

designers started their individual Small Caliber/High Velocity (SCHV) rifle experiments using the commercial .222 Remington cartridge. When it became clear that there was not enough case capacity to meet U.S. Continental Army Command's (CONARC) velocity and penetration requirements, ArmaLite contacted Remington to create a similar cartridge with a longer case body and shorter neck. This became the .222 Special. At the same time, Springfield Armory's Earle Harvey had Remington create an even longer cartridge case then known as the .224 Springfield. Springfield was forced to drop out of the CONARC competition, and thus the .224 Springfield was released in 1958 as a commercial sporting cartridge known as the .222 Remington Magnum. To prevent confusion among all of the competing .222 cartridge designations, the .222 Special was renamed the

.223 Remington The .223 Remington (designated as the 223 Remington by the SAAMI and 223 Rem by the CIP) is a rimless, bottlenecked rifle cartridge. It was developed in 1957 by Remington Arms and Fairchild Industries for the U.S. Continental Army Command ...

in 1959. In the spring of 1962 Remington submitted the specifications of the .223 Remington to the Sporting Arms and Ammunition Manufacturers' Institute (SAAMI). With the U.S. military adoption of the M16 assault rifle in 1963, the .223 Remington in a slightly derived form was standardized as the

5.56×45mm NATO The 5.56×45mm NATO (official NATO nomenclature 5.56 NATO, but often pronounced "five-five-six") is a rimless bottlenecked intermediate cartridge family developed in the late 1970s in Belgium by FN Herstal. It consists of the SS109, L110, and ...

. As a commercial sporting cartridge the .223 Remington was introduced in 1964.

Obsolescence

The .223 Remington cartridge has a shorter neck and the shoulder is moved back slightly compared to the .222 Remington Magnum. Case capacity is about 5% smaller than that of the .222 Remington Magnum, but it was loaded to a slightly higher pressure, so the two have essentially identical ballistics. As any widely used military cartridge is guaranteed to be a success on the commercial market, the .223 Remington sold exceptionally well and the .222 Remington Magnum faded rather quickly. In Europe SAKO produces the cartridge and some gun manufacturers offer the chambering. In the United States Remington continued to offer the .222 Remington Magnum in a couple of target and varmint rifle models for many years, but currently there are no commercial manufacturers in the U.S. either of rifles or ammunition in .222 Remington Magnum other than

Cooper Firearms of Montana Cooper Firearms of Montana was founded in 1990 by Dan Cooper and two other former Kimber of Oregon employees. History Cooper was created to build affordable custom-quality accurate rifles. As they put it "Rifles should shoot as well as they lo ...

. For many .222 Magnum shooters

handloading Handloading, or reloading, is the practice of making firearm cartridges by assembling the individual components (case, primer, propellant, and projectile), rather than purchasing mass-assembled, factory-loaded ammunition. The term ''handlo ...

of this cartridge provides ammunition, using components otherwise available for the other more popular .22 centrefire rounds. The .222 Remington Magnum cartridge case became the parent case for a new development introduced in 2004, the .204 Ruger. The .204 Ruger is based on the .222 Remington Magnum case necked down to hold a .20 caliber (5 mm) bullet.

References

*Speer Reloading Manual #11, Omark Industries, Inc., 1987
Cartridge Dimensions

External links

at Chuck Hawks {{DEFAULTSORT:222 Remington Magnum Pistol and rifle cartridges Remington Magnum rifle cartridges

Development

History

Obsolescence

See also

References

External links