The .218 Bee is a .22

caliber In guns, particularly firearms, caliber (or calibre; sometimes abbreviated as "cal") is the specified nominal internal diameter of the gun barrel bore – regardless of how or where the bore is measured and whether the finished bore matc ...

centerfire Two rounds of .357 Magnum, a centerfire cartridge; notice the circular primer in the center A centerfire cartridge is a firearm metallic cartridge whose primer is located at the center of the base of its casing (i.e. "case head"). Unlike rim ...

rifle A rifle is a long-barreled firearm designed for accurate shooting, with a barrel that has a helical pattern of grooves (rifling) cut into the bore wall. In keeping with their focus on accuracy, rifles are typically designed to be held with bo ...

cartridge designed for varmint hunting by

Winchester Winchester is a cathedral city in Hampshire, England. The city lies at the heart of the wider City of Winchester, a local government district, at the western end of the South Downs National Park, on the River Itchen. It is south-west of Lo ...

in 1937. The cartridge was originally chambered in the Winchester Model 65

lever-action The toggle-link action used in the iconic Winchester Model 1873 rifle, one of the most famous lever-action firearms Lever-action is a type of action for repeating firearms that uses a manually operated cocking handle located around the trigger ...

rifles, which may have ultimately led to its lack of popularity. The cartridge is named for the bore diameter of the barrel in which the cartridge is chambered rather than the usual practice in the United States of having the cartridge's nomenclature reflect in some way the bullet diameter.

History

The .218 Bee cartridge was designed by Winchester for use in their Model 65 lever-action rifles. Winchester designed the cartridge by necking down the .25-20 Winchester cartridge to accept a .224 diameter bullet. Just as the .32-20 can be considered to be the parent cartridge of the .25-20, it can also be considered the parent cartridge to the .218 Bee. The cartridge was introduced as a commercial cartridge by Winchester in 1937 in their Model 65 lever action rifle, which was also chambered for the .25-20 and .32-20 Winchester cartridges. However, while the .25-20 and the .32-20 Model 65 rifles have 22-inch (560 mm) barrels, the rifles chambered for the Bee have 24-inch (610 mm) barrels. Despite showing some early promise, the cartridge never really caught on, even though it was later chambered by Winchester in their new

bolt-action Bolt-action is a type of manual firearm action that is operated by ''directly'' manipulating the bolt via a bolt handle, which is most commonly placed on the right-hand side of the weapon (as most users are right-handed). Most bolt-actio ...

Model 43 rifle and by Sako in their L-46 rifle. There was some question about the accuracy of the .218 Bee as compared to the .222, but that was likely due to the difference of inherent accuracy between the bolt-actions rifles commonly chambered for the .222 and the lever-actions commonly chambered for the .218 Bee. Although not in common use, it is still a very effective cartridge in its class, for small to medium varmints out to about . Production ammunition and rifles are still available from a few manufacturers.

Performance

In terms of relative performance, the .218 Bee falls between the smaller .22 Hornet, and the larger .222 Remington and the more popular

.223 Remington The .223 Remington (designated as the 223 Remington by the SAAMI and 223 Rem by the CIP) is a rimless, bottlenecked rifle cartridge. It was developed in 1957 by Remington Arms and Fairchild Industries for the U.S. Continental Army Command ...

. In terms of short-range velocity, the .218 works quite well.

Notes

References

The .218 Bee
by Chuck Hawks

at Rocky's Reloading Room {{Winchester Cartridges Firearms 218 Bee Winchester Repeating Arms Company cartridges

History

Performance

See also

Notes

References