|
0-6-0
Under the Whyte notation for the classification of steam locomotives, represents the wheel arrangement of no leading wheels, six powered and coupled driving wheels on three axles and no trailing wheels. This was the most common wheel arrangement used on both tender and tank locomotives in versions with both inside and outside cylinders. In the United Kingdom, the Whyte notation of wheel arrangement was also often used for the classification of electric and diesel-electric locomotives with side-rod coupled driving wheels. Under the UIC classification, popular in Europe, this wheel arrangement is written as C if the wheels are coupled with rods or gears, or Co if they are independently driven, the latter usually being electric and diesel-electric locomotives. Overview History The 0-6-0 configuration was the most widely used wheel arrangement for both tender and tank steam locomotives. The type was also widely used for diesel switchers (shunters). Because they lack lea ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Whyte Notation
Whyte notation is a classification method for steam locomotives, and some internal combustion locomotives and electric locomotives, by wheel arrangement. It was devised by Frederick Methvan Whyte, and came into use in the early twentieth century following a December 1900 editorial in ''American Engineer and Railroad Journal''. The notation was adopted and remains in use in North America and the United Kingdom to describe the wheel arrangements of steam locomotives (in the latter case also for diesel and electric locomotives), but for modern locomotives, multiple units and trams it has been supplanted by the UIC system in Europe and by the AAR system (essentially a simplification of the UIC system) in North America. Structure of the system Basic form The notation in its basic form counts the number of leading wheels, then the number of driving wheels, and finally the number of trailing wheels, numbers being separated by dashes. For example, a locomotive with two lead ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Tank Locomotive
A tank locomotive or tank engine is a steam locomotive that carries its water in one or more on-board water tanks, instead of a more traditional tender. Most tank engines also have bunkers (or fuel tanks) to hold fuel; in a tender-tank locomotive a tender holds some or all of the fuel, and may hold some water also. There are several different types of tank locomotive, distinguished by the position and style of the water tanks and fuel bunkers. The most common type has tanks mounted either side of the boiler. This type originated about 1840 and quickly became popular for industrial tasks, and later for shunting and shorter-distance main line duties. Tank locomotives have advantages and disadvantages compared to traditional locomotives that required a separate tender to carry needed water and fuel. History Origins The first tank locomotive was the ''Novelty'' that ran at the Rainhill Trials in 1829. It was an example of a ''Well Tank''. However, the more common fo ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Leicester And Swannington Railway
The Leicester and Swannington Railway (L&SR) was one of England's first railways, built to bring coal from West Leicestershire collieries to Leicester, where there was great industrial demand for coal. The line opened in 1832, and included a tunnel over a mile in length, and two rope-worked inclined planes; elsewhere it was locomotive-operated, and it carried passengers. When it was built, the L&SR was the only railway in the area, but the Midland Railway (MR) was formed and had a main line through Leicester, opened in 1840By the Midland Counties Railway. and its directors decided to acquire the L&SR. They made a generous offer and they took possession in 1847. At first the Midland Railway line and the L&SR were not connected, but the Midland Railway constructed a route from its main line to Burton, using part of the L&SR. The MR by-passed the inclines for its new route, but most of the other parts of the L&SR continued in use until 1966. The MR Burton line continues in use at th ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Charles Tayleur And Company
The Vulcan Foundry Limited was an English locomotive builder sited at Newton-le-Willows, Lancashire (now Merseyside). History The Vulcan Foundry opened in 1832, as Charles Tayleur and Company to produce girders for bridges, switches, crossings and other ironwork following the opening of the Liverpool and Manchester Railway. Due to the distance from the locomotive works in Newcastle-upon-Tyne, it seemed preferable to build and support them locally. In 1832, Robert Stephenson became a partner for a few years. The company had become The Vulcan Foundry Company in 1847 and acquired limited liability in 1864. From the beginning of 1898, the name changed again to The Vulcan Foundry Limited, dropping the word 'company.' Vulcan Halt The site had its own railway station, Vulcan Halt, on the former Warrington and Newton Railway line from to . The wooden-platformed halt was opened on 1 November 1916 by the London and North Western Railway, and closed on 12 June 1965. Steam locom ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Derwent (locomotive)
''Derwent'' is an 0-6-0 steam locomotive built in 1845 by William and Alfred Kitching for the Stockton and Darlington Railway (S&DR). It is preserved at Darlington Railway Centre and Museum, now known as ''Head of Steam''. Design ''Derwent'' was designed by Timothy Hackworth and built by W. & A. Kitching in Darlington, England in 1845. It is similar in design to two of their 1842 locomotives, ''Leader'' and ''Trader'', with outside cylinders fixed at the trailing end of the boiler and four-foot diameter, six-wheeled coupled wheels. Withdrawn from service in 1869, it was sold to Pease & Partners for use on their colliery lines and spent some time at the construction of the Waskerley Reservoir in County Durham. It took part in the Stephenson Centenary celebrations at Newcastle in 1881 and the Queen's Diamond Jubilee in 1887. Preservation ''Derwent'' was presented to the North Eastern Railway (NER) in 1898 for preservation. After restoration the locomotive ran under its ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Stockton And Darlington Railway
The Stockton and Darlington Railway (S&DR) was a railway company that operated in north-east England from 1825 to 1863. The world's first public railway to use steam locomotives, its first line connected collieries near Shildon with Darlington and Stockton-on-Tees in County Durham, and was officially opened on 27 September 1825. The movement of coal to ships rapidly became a lucrative business, and the line was soon extended to a new port at Middlesbrough. While coal waggons were hauled by steam locomotives from the start, passengers were carried in coaches drawn by horses until carriages hauled by steam locomotives were introduced in 1833. The S&DR was involved in the building of the East Coast Main Line between York and Darlington, but its main expansion was at Middlesbrough Docks and west into Weardale and east to Redcar. It suffered severe financial difficulties at the end of the 1840s and was nearly taken over by the York, Newcastle and Berwick Railway, before the di ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Kitson And Company
Kitson and Company was a locomotive manufacturer based in Hunslet, Leeds, West Yorkshire, England. Early history The company was started in 1835 by James Kitson at the Airedale Foundry, off Pearson Street, Hunslet, with Charles Todd as a partner. Todd had been apprenticed to Matthew Murray at the Round Foundry in Holbeck, Leeds. Initially, the firm made parts for other builders, until it was joined in 1838 by David Laird, a wealthy farmer who was looking for investments, and the company became Todd, Kitson and Laird. That year saw the production of the company's first complete locomotives, either for the North Midland or the Liverpool and Manchester Railway. However, Todd left almost immediately to form Shepherd and Todd, and the company was known variously as Kitson and Laird or Laird and Kitson. The order for six engines by the Liverpool and Manchester began with ''Lion'', which still exists. Around 1858, it was withdrawn from service and sold to the Mersey Docks and Har ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Shunter
A switcher, shunter, yard pilot, switch engine, yard goat, or shifter is a small railroad locomotive used for manoeuvring railroad cars inside a rail yard in a process known as ''switching'' (US) or ''shunting'' (UK). Switchers are not intended for moving trains over long distances but rather for assembling trains in order for another locomotive to take over. They do this in classification yards (Great Britain: ''marshalling yards''). Switchers may also make short transfer runs and even be the only motive power on branch lines and switching and terminal railroads. The term can also be used to describe the workers operating these engines or engaged in directing shunting operations. Switching locomotives may be purpose-built engines, but may also be downgraded main-line engines, or simply main-line engines assigned to switching. Switchers can also be used on short excursion train rides. The typical switcher is optimised for its job, being relatively low-powered but with a high ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Switcher
A switcher, shunter, yard pilot, switch engine, yard goat, or shifter is a small railroad locomotive used for manoeuvring railroad cars inside a rail yard in a process known as ''switching'' (US) or ''shunting'' (UK). Switchers are not intended for moving trains over long distances but rather for assembling trains in order for another locomotive to take over. They do this in classification yards (Great Britain: ''marshalling yards''). Switchers may also make short transfer runs and even be the only motive power on branch lines and switching and terminal railroads. The term can also be used to describe the workers operating these engines or engaged in directing shunting operations. Switching locomotives may be purpose-built engines, but may also be downgraded main-line engines, or simply main-line engines assigned to switching. Switchers can also be used on short excursion train rides. The typical switcher is optimised for its job, being relatively low-powered but with a hi ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Darlington Railway Centre And Museum
Head of Steam, formerly known as the Darlington Railway Centre and Museum, is a railway museum located on the 1825 route of the Stockton and Darlington Railway, which was the world's first steam-powered passenger railway. It is based inside the station building at the North Road railway station. Its exhibits are devoted to the area formerly served by the North Eastern Railway with a particular focus on the Stockton & Darlington Railway and the railway industry of Darlington.In 2022 plans were submitted to expand the museum as part of the Railway Heritage Quarter. Locomotives The museum currently has five locomotives on display. Two are owned by the museum, while three are on long-term loan from the National Railway Museum The National Railway Museum is a museum in York forming part of the Science Museum Group. The museum tells the story of rail transport in Britain and its impact on society. It is the home of the national collection of historically significant .... M ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Timothy Hackworth
Timothy Hackworth (22 December 1786 – 7 July 1850) was an English steam locomotive engineer who lived in Shildon, County Durham, England and was the first locomotive superintendent of the Stockton and Darlington Railway. Youth and early work Timothy Hackworth was born in Wylam in 1786, five years after his fellow railway pioneer George Stephenson had been born in the same village. Hackworth was the eldest son of John Hackworth who occupied the position of foreman blacksmith at Wylam Colliery until his death in 1804; the father had already acquired a considerable reputation as a mechanical worker and boiler maker. At the end of his apprenticeship in 1810 Timothy took over his father's position. Since 1804, the mine owner, Christopher Blackett had been investigating the possibilities of working the mine's short colliery tramroad by steam traction. Blackett set up a four-man working group including himself, William Hedley, the viewer; Timothy Hackworth, the new foreman smith ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
William And Alfred Kitching
Whessoe is a company based in Darlington and on Teesside in North East England. It was formerly a supplier of chemical, oil and nuclear plant and instrumentation, and today is a manufacturer of low temperature storage. History Background – W. and A. Kitching The Whessoe Company traces its origins back to an iron foundry shop founded in 1790. The family business was inherited by William Kitching (d. 1850) and Alfred Kitchin (1808–1882), both Quakers, who established the ''Hope Town Foundry'' in Darlington in 1832.Sources: * * *Sources: * *, Hope Town Foundry (original location, −1860) Both William and Alfred Kitching were on the board of the Stockton and Darlington Railway, as well as being shareholders or its subsidiaries. and the company built several locomotives for the company, including subcontracted manufacturing and repair work from Timothy Hackworth. 0-6-0 Hackworth designed "Tory" class locomotive "Derwent", built 1845 is preserved as part of the National co ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
.jpg "Click for more on -> 0-6-0")
.jpg "Click for more on -> Derwent (locomotive)")
.jpg "Click for more on -> Stockton And Darlington Railway")
