Volume percent

In chemistry and fluid mechanics, the volume fraction φ_''i'' is defined as the volume of a constituent ''V''_''i'' divided by the volume of all constituents of the mixture ''V'' prior to mixing:

:$\phi_i = \frac$

Being dimensionless, its unit is 1; it is expressed as a number, e.g., 0.18. It is the same concept as volume percent (vol%) except that the latter is expressed with a denominator of 100, e.g., 18%.

The volume fraction coincides with the volume concentration in ideal solutions where the volumes of the constituents are additive (the volume of the solution is equal to the sum of the volumes of its ingredients).

The sum of all volume fractions of a mixture is equal to 1:

:$\sum_^ V_i = V ; \qquad \sum_^ \phi_i = 1$

The volume fraction (percentage by volume, vol%) is one way of expressing the composition of a mixture with a dimensionless quantity; mass fraction (percentage by weight, wt%) and mole fraction (percentage by moles, mol%) are others.

Volume concentration and volume percent

Volume percent is the concentration of a certain solute, measured by volume, in a solution. It has as a denominator the volume of the mixture itself, as usual for expressions of concentration, rather than the total of all the individual component's volumes prior to mixing:

:$\text = \frac\text\text \times 100% = \text \times 100%$

:$\varphi_i = \phi_i (1 - \frac)$

Volume percent is usually used when the solution is made by mixing two fluids, such as liquids or gases. However, percentages are only additive for ideal gases.''Volume-volume percentage''Chembuddy
website

The percentage by volume (vol%) is one way of expressing the composition of a mixture with a dimensionless quantity; mass fraction (percentage by weight, wt%) and mole fraction (percentage by moles, mol%) are others.

In the case of a mixture of ethanol and water, which are miscible in all proportions, the designation of solvent and solute is arbitrary. The volume of such a mixture is slightly less than the sum of the volumes of the components. Thus, by the above definition, the term "40% alcohol by volume" refers to a mixture of 40 volume units of ethanol with enough water to make a final volume of 100 units, rather than a mixture of 40 units of ethanol with 60 units of water. The "enough water" is actually slightly more than 60 volume units, since water-ethanol mixture loses volume due to intermolecular attraction.

Relation to mass fraction

Volume fraction is related to mass fraction,

$Y_i \equiv\frac = \frac$

by

$Y_i = \frac , \rho _\equiv , \rho_m\equiv\sum_j$

where $\rho_i\$is the constituent density, and $\rho_m$ is the mixture density.

See also

* Alcohol by volume
* Alcohol meter
* Alcohol proof
* Apparent molar property
* For non-ideal mixtures, see Partial molar volume and Excess molar quantity
* Percentage
* Mass fraction (chemistry)

References

{{Chemical solutions

Dimensionless numbers of chemistry
Physical chemistry
Thermodynamics
Analytical chemistry