Why Sustainable Refurbishment?
Climate Change
One of the objectives of the United Nations Framework Convention on Climate Change (UNFCCC) is the mitigation of greenhouse gas emissions that contribute to climate change. More specifically, the UN supports the immediate reduction of building-related greenhouse gas emissions Building refurbishment plays a key role in the decarbonization of the current building stock Other than tearing down existing buildings, it is the only way to improve building performance or to develop zero-emission buildings Energy-efficient refurbishments are a tool to reduce energy consumption in buildings which will result in lower greenhouse gas emissions and resource use Studies present the significance of the possible impact of widespread refurbishment implementation on individual GHG emissions, but also worldwide emissions and energy consumptionEnvironmental Justice & Social Sustainability
Social sustainability relates to the impacts of a building on the surrounding or occupying society, community, and individuals This is considered in environmental impact assessment tools, such as life cycle assessment (LCA). Sustainable refurbishment integrates economic, social, and environmental needs to improve upon the existing building conditions For example, sustainable buildings are socially sustainable because they are healthier for occupants due to the use of materials that do not negatively impact healthIndoor Environmental Quality
The indoor environmental quality of the existing building stock is known to often be more unsatisfactory and unhealthy than the outdoor environment due to the design and materials used. The leading argument for sustainable refurbishment, and sustainable building in general, is the belief that green buildings are healthier and more satisfactory for occupants The specifications for sustainable refurbishments take measures to ensure that the materials and building framework does not radiate dangerous particulates and gasses, like sulfur dioxide and nitrogen dioxide, into the indoor environment, and further measures are taken to filter indoor air for inhabitants ,6 The “Citizen’s Healthcare Principle” states that sustainable refurbishments must ensure that buildings are safe and improve living quality for those inside The refurbishment design must consider both the indoor microclimate and the external environment around the building when developing the program The microclimate parameters that should be considered include: * Air velocity * Humidity * Dew point * Lighting * Air circulation velocity * Acoustics * TemperatureHistoric Conservation
The preservation of historic buildings is inherently sustainable since it maximizes the lifespan of existing materials and infrastructure Conserving the materials and existing structures reduces waste and preserves the character of small historic communities. Many argue that the epitome of sustainability is to not build at all, which equites to preservation and refurbishment.Finite Resources: Materials and Energy
As a society, we have a finite amount of many resources, nonrenewable energy sources for example. Non-sustainable buildings, in terms of their operation, also consume a significant amount of non-renewable energy resources, relative to other industries. Again, it is necessary to increase the energy efficiency of the existing building stick to reduce non-renewable energy resource consumption, or even replace that with renewable sources entirely Efficiency can be improved through sustainable building refurbishments that modify the building systems and building operations. With buildings becoming more energy efficient it is increasingly important to look at the life cycle impact of the materials that make up the building Designing and constructing buildings that are not sustainable for long lifetimes allows for the construction and demolition of buildings with short lifetimes, which wastes construction materials that are not used for their entire lifetime capacity. Reusing existing buildings enables building owners to use the embodied energy that is already invested in the building composition, rather than wasting that embodied carbon and consuming more with a new building constructionDevelopment of the Goals of Sustainable Refurbishment
This section lays out a timeline and progression of the development of the goals of sustainable refurbishment from a few different authors: The main goals of “sustainable development”, by Baldwin in 1996, include minimizing the impact on human health and the environment, optimal use of non-renewable resources, utilizing renewable resources, and future planning and adaptability ,8 Minimizing impact on the climate and ecological system is achieved through a reduction of emissions of greenhouse gasses, which is connected to the other goal of optimizing the use of non-renewable resources. By reducing the non-renewable energy sources used to construct and operate buildings, the embodied greenhouse gas emissions from buildings are also reduced. The refurbishment could also attempt to protect and enhance local ecology through landscape architecture Human health is preserved by increasing ventilation and air filtration of indoor spaces and by avoiding potentially harmful construction materials that can impact respiratory health. This can also be achieved by encouraging the reuse or recycling of materials to reduce or eliminate material waste. The goal of renewable resource use can be achieved in a refurbishment by electrifying the home’s heating and cooling systems, by installing on-site renewables generation and storage, or by using renewable resource products as building materials – like timber Building for the future can be achieved through refurbishment by making an existing building more durable and extending the previous lifespan of the building. In 1996, Keeping and Shiers described the goals of “green refurbishments” as having three parts ,9 The first part includes lower utility costs since less energy is consumed due to a combination of efficient and passive heating and cooling systems. The second part ensures lower maintenance costs since the refurbished systems are simpler and were installed to be accessible for repairs. Finally, the third portion claims that buildings with green refurbishments are healthier and more comfortable for occupants Ultimately, in 2006, Sitar et al. defined the principles of “sustainable refurbishments”Characteristics of Sustainable Refurbishment
Holistic Improvement
Sustainable refurbishments aim to reach “total building performance optimization” with the integrates of multiple systems throughout the building and the community The refurbishment not only decreases energy consumption but also improves occupant comfort in terms of noise, temperature, lighting, etc. It extends the life cycle of the building, reduces environmental impact, and creates healthy occupant conditionsEnvironmental Responsibility
Sustainable refurbishments aim to minimize the negative environmental impacts of the renovation by reducing quantities of harmful materials, utilizing energy-saving technology, and retrofitting the building for renewable energy use, as opposed to non-renewable energy sources Some responsible environmental measures that can be incorporated in a building retrofit include energy and water efficiency, waste reduction and recycling, use of low environmental impact materials, and effective building operation An example of energy-efficient designs could include high-efficiency lighting and smart controls. Similarly, an example of water-efficient design could include dual-flushing toilets, greywater recycling, or aerating water fixtures.Energy Efficiency
A sustainable retrofit ensures that the energy performance of the building after renovation is significantly better than it was before the work. The increase in energy performance must meet the current building regulations for new buildings The sustainable approach would be to even design beyond the code minimum and plan for future requirements. A deep energy refurbishment should include the integration of energy generation on-site from renewable energy sources, with the goal of developing a nearly zero-energy building. The energy efficiency gained through the architectural retrofit makes the integration of renewable energy sources cost-effective A study in the United Kingdom showed that, after a refurbishment, buildings had lower operating costs even if sustainability was not a priority of the retrofit A study of energy refurbishments of residential buildings showed that the refurbishment led to an average thermal energy savings of 59% during the heating season The savings consisted of 25% from thermal insulation addition in exterior walls and floor, 10% from window insulation improvements, 6% from a reduction in air exchange, and 18% from the installation of heating controls The retrofit of the building envelope and operation reduced the energy consumption of the building, the associated greenhouse gas emissions during the operation phase, and the overall environmental impact ,5 Sustainable refurbishment ensures energy efficiency by improving the following systems * Insulation * Building Envelope Tightness * Heating * Cooling * Conditioning * Lighting There are typical strategies to improve upon each of the above systems. Innovative insulation materials can be utilized that have a lower environmental impact, but even non-sustainable insulation additions can improve the energy performance of the building The building envelope can be improved by replacing the existing windows with efficient windows in terms of thermal bridging and optimizing solar gain The use of passive ventilation strategies or hybrid systems that use both passive and active strategies reduces the energy required for conditioning Buildings’ heating and cooling systems can be powered with solar energy, or even use solar-heated water, which both reduce non-renewable energy consumption through heating and cooling Finally, the electricity used for lighting can be reduced by optimizing daylighting in occupiable spacesImproved Materials Based on Impact
The overall environmental impact of a sustainable refurbishment is highly dependent on the material choices for the refurbishment The Rational Resources Principle for refurbishment encourages the efficient use of construction materials and natural resources This is quantified through life cycle analysis that measures the impact of a material over its lifetime, which stretches into the “D phase” that includes end-of-life waste after the building is demolished ,4 Waste transportation adds costs to both construction and building maintenance. Designing refurbishments that reduce waste, and maximize reuse, minimize waste hauling costs in the short-term and long-term by using materials for their entire intended life When materials can be compared on the basis of a common bottom line, through life cycle analysis, an optimum path for the design appears Ultimately, since the refurbishment will require additional construction materials, there will be a negative environmental impact, but the aim of sustainable refurbishment is to minimize these impacts For example, reusing on-site timber, using reclaimed timber, and using timber from renewable certified sources are sustainable material choices based on taking advantage of the embodied carbon that has already been invested in those materials As was mentioned prior, the analysis of the life cycle of building materials’ primary energy demand and global warming potential is becoming more important as buildings are consuming less energy during their operation The human health impact of materials is also included in their life cycle assessment, meaning that a construction material cannot be sustainable if it harms its occupants. Therefore, sustainable refurbishments should not include adhesives, paints, or glues that expel low-volatile organic compounds into the indoor air of the building Materials that harm indoor occupants or the exterior ecology are considered lethal and are therefore not utilized in sustainable refurbishmentsConcept Model
The image shown is a conceptual model of sustainable refurbishment The dimensions of the model include technical, economic, architectural, social, ecological, and cultural. The dimensions are all related and influence each other and the refurbishment design itself The model depicts how stakeholders expect the refurbishment design to yield energy savings, increased occupant comfort and health, extension of the building's lifetime, environmental protection, and, of course, an economic outcome. These expectation align with the goals for sustainable refurbishment that were developed in the previous section. The concept model also introduces the steps of the refurbishment process that will be discussed next in this article.Steps of Sustainable Refurbishment Process
The principle of sustainable refurbishment should be incorporated into the project development from the first schematic through building commissioning and turnover. This section provides a generalized list of steps in the design process for a sustainable refurbishment 1. Data collection: * Problem formulation * Project goals developed 2. Determination of the degree of refurbishment necessary: * Physical deterioration? * Presence of moisture * Thermal bridging * Current code requirements not met? * High energy demand/consumption? * Poor indoor environmental quality and/or air quality? * Poor outdoor air quality * Unsatisfied occupants? 3. Modeling phase: * Analyze data collected * Develop criteria to base the alternative comparison on * Develop design alternatives (consider stakeholders and look at best practices) 4. Selection Phase: * Evaluate alternatives (address strengths and weaknesses) * Choose a recommendation * Optimize chosen design 5. Implementation Phase In the modeling phase, it is important to consider the greater environment that the refurbishment is impacting because decisions cannot be made separate from this context The social and political conditions of the community need to be considered, specifically the living conditions and standards. The other context to consider is the ecological conditions, like the average temperature, humidity, soil quality, natural resources, topography, etc.Sustainable Refurbishment Case Study
A 2019 case study in Vienna explored the impact of a sustainable refurbishment that included a Multi-Active Façade System The assumption of the study was that the improvement of the outermost layer of the structure, the façade shell, was the most important regarding energy efficiency Insulation, specifically, was a major contributor to energy savings during building operation, and a life cycle analysis was required to make an informed decision about the insulation material The façade system in this study reduced the building’s energy demand with insulation and corrugated board, which passively increased the solar gain in the winter when extra heat was required to minimize energy consumption and reduced the solar gain during the summer This was achieved by installing the façade at a strategic angle to allow ultraviolet rays to pass through only when the sun is at its lower winter angle. The façade also integrated renewable energy generation into the shell itself, as well as energy storage for when there is no active radiation After the sustainable refurbishment with the new facade, the heating demand for the building was modeled to be about 53% less than the baseline value The low energy demand even exceeded the new building standard requirements for 2021 by about 45%, making the design adaptable and resilient for the futureCriticism
Technological Developments Needed
There is criticism of the efficacy of sustainable refurbishment in terms of decarbonizing the current building stock. This criticism is directed specifically toward large-scale energy refurbishments of industrial structures. One could argue that the embodied and operational carbon of those types of buildings are significantly larger than that of smaller residential or office buildings which are discussed in this article. However, the technology to efficiently heat, cool, and power these structures do not yet exist, and they cannot completely rely on passive strategies due to more stringent code restrictions It cannot be expected that these large-impact buildings be refurbished if it cannot be done economically. This argument impacts the hopeful global energy consumption decrease that researchers propose for sustainable refurbishments.Adaptability of Current Housing Stock
Another criticism of sustainable refurbishments is that not all existing buildings are good candidates for refurbishment. Put plainly, it is challenging to improve on buildings that were poorly designed from the start. It was proven that floor plans that are typical, with deep shapes, were more adaptable than irregular designs Similarly, floor-to-floor heights impact the designer and contractor’s ability to modify utility ducts, meaning that taller buildings are easier to refurbish Research also shows that structures that qualify as “higher grade” building stock experience greater levels and frequency of sustainable refurbishment There seem to be a number of reasons for this, one being that premium buildings undergo retrofit earlier in their lifecycle in order to compete with newer sustainable buildings It can be argued that it is not sustainable to replace building systems early in their lifecycle, just to invest in additional embodied carbon and discard the old equipment into a landfill. However, there is an opportunity for “young” removed materials to be utilized in lower-quality refurbishments in low-income communities In an Australian study using data from 2007, it was found that about 89% of all premium retrofits were to buildings that were less than 25 years old, with the remaining 11% aged between 26 and 50 years old The same study showed that no refurbishments occurred in the “least desirable” stock locationsSocial Justice
This gap in building improvement should be addressed by policymakers to avoid an environmental justice issue with a “two-tiered” market Of course, the premium stock has high rental prices which incentivize owners to invest in them further, which is not the case for the lower quality stock. It is not fair or just that only occupants that can afford premium housing get to live in the ensured healthy and comfortable environment of a sustainable refurbishment. The Affordability Principle states that sustainable refurbishments should be affordable for the general population In addition, information about sustainable refurbishment should be shared and freely available to people of all income levels, ages, races, etc. because everyone deserves an equal opportunity to live better.Example demonstration projects
* http://www.dena.de * http://www.superhomes.org.ukSources of technical guidance
* http://www.energysavingtrust.org.uk * http://www.ademe.fr * http://www.nps.gov/tps/standards/rehabilitation/guidelines/index.htmSee also
General *References
Todorovic, Marija S., et al. “Historic Building’s Holistic and Sustainable Deep Energy Refurbishment via BPS, Energy Efficiency and Renewable energy—A Case Study.” Energy and Buildings, vol. 95, 2015, pp. 130–37, https://doi.org/10.1016/j.enbuild.2014.11.011. Todorovic, Marija. "Large scale residential/municipal RES integrated refurbishment construction and HVAC systems engineering R&D needs." ASHRAE Transactions, vol. 118, no. 1, Jan. 2012, pp. 50+. Gale Academic OneFile