Scientific visualization

Scientific visualization ( also spelled scientific visualisation) is an interdisciplinary branch of science concerned with the visualization of scientific phenomena. Michael Friendly (2008)
"Milestones in the history of thematic cartography, statistical graphics, and data visualization"
It is also considered a subset of computer graphics, a branch of computer science. The purpose of scientific visualization is to graphically illustrate scientific data to enable scientists to understand, illustrate, and glean insight from their data. Research into how people read and misread various types of visualizations is helping to determine what types and features of visualizations are most understandable and effective in conveying information.

History

One of the earliest examples of three-dimensional scientific visualisation was Maxwell's thermodynamic surface, sculpted in clay in 1874 by James Clerk Maxwell. This prefigured modern scientific visualization techniques that use computer graphics.

Notable early two-dimensional examples include the flow map of Napoleon's March on Moscow produced by Charles Joseph Minard in 1869; the "coxcombs" used by Florence Nightingale in 1857 as part of a campaign to improve sanitary conditions in the British army; and the dot map used by John Snow in 1855 to visualise the Broad Street cholera outbreak.

Data visualization methods

Criteria for classifications:
* dimension of the data
* method
** textura based methods
** geometry-based approaches such as arrow plots, streamlines, pathlines, timelines, streaklines, particle tracing, surface particles, stream arrows, stream tubes, stream balls, flow volumes and topological analysis

Two-dimensional data sets

Scientific visualization using computer graphics gained in popularity as graphics matured. Primary applications were scalar fields and vector fields from computer simulations and also measured data. The primary methods for visualizing two-dimensional (2D) scalar fields are color mapping and drawing contour lines. 2D vector fields are visualized using glyphs and streamlines or line integral convolution methods. 2D tensor fields are often resolved to a vector field by using one of the two eigenvectors to represent the tensor each point in the field and then visualized using vector field visualization methods.

Three-dimensional data sets

For 3D scalar fields the primary methods are volume rendering and isosurfaces. Methods for visualizing vector fields include glyphs (graphical icons) such as arrows, streamlines and streaklines, particle tracing, line integral convolution (LIC) and topological methods. Later, visualization techniques such as hyperstreamlines were developed to visualize 2D and 3D tensor fields.

Topics

Computer animation

Computer animation is the art, technique, and science of creating moving images via the use of computers. It is becoming more common to be created by means of 3D computer graphics, though 2D computer graphics are still widely used for stylistic, low bandwidth, and faster real-time rendering needs. Sometimes the target of the animation is the computer itself, but sometimes the target is another medium, such as film. It is also referred to as CGI (Computer-generated imagery or computer-generated imaging), especially when used in films. Applications include medical animation, which is most commonly utilized as an instructional tool for medical professionals or their patients.

Computer simulation

Computer simulation is a computer program, or network of computers, that attempts to simulate an abstract model of a particular system. Computer simulations have become a useful part of mathematical modelling of many natural systems in physics, and computational physics, chemistry and biology; human systems in economics, psychology, and social science; and in the process of engineering and new technology, to gain insight into the operation of those systems, or to observe their behavior. The simultaneous visualization and simulation of a system is called visulation.

Computer simulations vary from computer programs that run a few minutes, to network-based groups of computers running for hours, to ongoing simulations that run for months. The scale of events being simulated by computer simulations has far exceeded anything possible (or perhaps even imaginable) using the traditional paper-and-pencil mathematical modeling: over 10 years ago, a desert-battle simulation, of one force invading another, involved the modeling of 66,239 tanks, trucks and other vehicles on simulated terrain around Kuwait, using multiple supercomputers in the DoD High Performance Computing Modernization Program."Researchers stage largest military simulation ever"
(news), Jet Propulsion Laboratory, Caltech, December 1997.

Information visualization

Information visualization is the study of "the visual representation of large-scale collections of non-numerical information, such as files and lines of code in software systems, library and bibliographic databases, networks of relations on the internet, and so forth".

Information visualization focused on the creation of approaches for conveying abstract information in intuitive ways. Visual representations and interaction techniques take advantage of the human eye's broad bandwidth pathway into the mind to allow users to see, explore, and understand large amounts of information at once. The key difference between scientific visualization and information visualization is that information visualization is often applied to data that is not generated by scientific inquiry. Some examples are graphical representations of data for business, government, news and social media.

Interface technology and perception

Interface technology and perception shows how new interfaces and a better understanding of underlying perceptual issues create new opportunities for the scientific visualization community. Lawrence J. Rosenblum (ed.) (1994). ''Scientific Visualization: Advances and challenges''. Academic Press.

Surface rendering

Rendering is the process of generating an image from a model, by means of computer programs. The model is a description of three-dimensional objects in a strictly defined language or data structure. It would contain geometry, viewpoint, texture, lighting, and shading information. The image is a digital image or raster graphics image. The term may be by analogy with an "artist's rendering" of a scene. 'Rendering' is also used to describe the process of calculating effects in a video editing file to produce final video output. Important rendering techniques are:

;Scanline rendering and rasterisation
: A high-level representation of an image necessarily contains elements in a different domain from pixels. These elements are referred to as primitives. In a schematic drawing, for instance, line segments and curves might be primitives. In a graphical user interface, windows and buttons might be the primitives. In 3D rendering, triangles and polygons in space might be primitives.

;Ray casting
: Ray casting is primarily used for realtime simulations, such as those used in 3D computer games and cartoon animations, where detail is not important, or where it is more efficient to manually fake the details in order to obtain better performance in the computational stage. This is usually the case when a large number of frames need to be animated. The resulting surfaces have a characteristic 'flat' appearance when no additional tricks are used, as if objects in the scene were all painted with matte finish.

;Radiosity
: Radiosity, also known as Global Illumination, is a method that attempts to simulate the way in which directly illuminated surfaces act as indirect light sources that illuminate other surfaces. This produces more realistic shading and seems to better capture the ' ambience' of an indoor scene. A classic example is the way that shadows 'hug' the corners of rooms.

;Ray tracing
: Ray tracing is an extension of the same technique developed in scanline rendering and ray casting. Like those, it handles complicated objects well, and the objects may be described mathematically. Unlike scanline and casting, ray tracing is almost always a Monte Carlo technique, that is one based on averaging a number of randomly generated samples from a model.

Volume rendering

Volume rendering is a technique used to display a 2D projection of a 3D discretely sampled data set. A typical 3D data set is a group of 2D slice images acquired by a CT or MRI scanner. Usually these are acquired in a regular pattern (e.g., one slice every millimeter) and usually have a regular number of image pixels in a regular pattern. This is an example of a regular volumetric grid, with each volume element, or voxel represented by a single value that is obtained by sampling the immediate area surrounding the voxel.

Volume visualization

According to Rosenblum (1994) "volume visualization examines a set of techniques that allows viewing an object without mathematically representing the other surface. Initially used in medical imaging, volume visualization has become an essential technique for many sciences, portraying phenomena become an essential technique such as clouds, water flows, and molecular and biological structure. Many volume visualization algorithms are computationally expensive and demand large data storage. Advances in hardware and software are generalizing volume visualization as well as real time performances".

Developments of web-based technologies, and in-browser rendering have allowed of simple volumetric presentation of a cuboid with a changing frame of reference to show volume, mass and density data.

Applications

This section will give a series of examples how scientific visualization can be applied today.

In the natural sciences

Image:Star formation.jpg, ''Star formation''
Image:Gravitywaves.JPG, ''Gravitational waves''
Image:Massive Star Supernovae Explosions.jpg, ''Massive Star Supernovae Explosions''
Image:Molecular rendering.jpg, ''Molecular rendering''

''Star formation'': The featured plot is a Volume plot of the logarithm of gas/dust density in an Enzo star and galaxy simulation. Regions of high density are white while less dense regions are more blue and also more transparent.

''Gravitational waves'': Researchers used the Globus Toolkit to harness the power of multiple supercomputers to simulate the gravitational effects of black-hole collisions.

''Massive Star Supernovae Explosions'': In the image, three-Dimensional Radiation Hydrodynamics Calculations of Massive Star Supernovae Explosions The DJEHUTY stellar evolution code was used to calculate the explosion of SN 1987A model in three dimensions.

''Molecular rendering'': VisIt's general plotting capabilities were used to create the molecular rendering shown in the featured visualization. The original data was taken from the Protein Data Bank and turned into a VTK file before rendering.

In

geography and ecology

Image:Terrain rendering.jpg, ''Terrain rendering''
Image:Climate visualization.jpg, ''Climate visualization''
Image:Atmospheric Anomaly in Times Square.jpg, ''Atmospheric Anomaly in Times Square''

'' Terrain visualization'': VisIt can read several file formats common in the field of Geographic Information Systems (GIS), allowing one to plot raster data such as terrain data in visualizations. The featured image shows a plot of a DEM dataset containing mountainous areas near Dunsmuir, CA. Elevation lines are added to the plot to help delineate changes in elevation.

''Tornado Simulation'': This image was created from data generated by a tornado simulation calculated on NCSA's IBM p690 computing cluster. High-definition television animations of the storm produced at NCSA were included in an episode of the PBS television series NOVA called "Hunt for the Supertwister." The tornado is shown by spheres that are colored according to pressure; orange and blue tubes represent the rising and falling airflow around the tornado.

''Climate visualization'': This visualization depicts the carbon dioxide from various sources that are advected individually as tracers in the atmosphere model. Carbon dioxide from the ocean is shown as plumes during February 1900.

''Atmospheric Anomaly in Times Square'' In the image the results from the SAMRAI simulation framework of an atmospheric anomaly in and around Times Square are visualized.

In mathematics

Scientific visualization of mathematical structures has been undertaken for purposes of building intuition and for aiding the forming of mental models.

Higher-dimensional objects can be visualized in form of projections (views) in lower dimensions. In particular, 4-dimensional objects are visualized by means of projection in three dimensions. The lower-dimensional projections of higher-dimensional objects can be used for purposes of virtual object manipulation, allowing 3D objects to be manipulated by operations performed in 2D, and 4D objects by interactions performed in 3D.

In complex analysis, functions of the complex plane are inherently 4-dimensional, but there is no natural geometric projection into lower dimensional visual representations. Instead, colour vision is exploited to capture dimensional information using techniques such as domain coloring.

In the formal sciences

Image:Curve plots.jpg, ''Curve plots''
Image:Image annotations.jpg, ''Image annotations''
Image:Scatter plot.jpg, ''Scatter plot''

''Computer mapping of topographical surfaces'': Through computer mapping of topographical surfaces, mathematicians can test theories of how materials will change when stressed. The imaging is part of the work on the NSF-funded Electronic Visualization Laboratory at the University of Illinois at Chicago.

''Curve plots'': VisIt can plot curves from data read from files and it can be used to extract and plot curve data from higher-dimensional datasets using lineout operators or queries. The curves in the featured image correspond to elevation data along lines drawn on DEM data and were created with the feature lineout capability. Lineout allows you to interactively draw a line, which specifies a path for data extraction. The resulting data was then plotted as curves.

''Image annotations'': The featured plot shows Leaf Area Index (LAI), a measure of global vegetative matter, from a NetCDF dataset. The primary plot is the large plot at the bottom, which shows the LAI for the whole world. The plots on top are actually annotations that contain images generated earlier. Image annotations can be used to include material that enhances a visualization such as auxiliary plots, images of experimental data, project logos, etc.

''Scatter plot'': VisIt's Scatter plot allows visualizing multivariate data of up to four dimensions. The Scatter plot takes multiple scalar variables and uses them for different axes in phase space. The different variables are combined to form coordinates in the phase space and they are displayed using glyphs and colored using another scalar variable.

In the applied sciences

Image:Porsche 911 model imported from a NASTRAN bulk data file.jpg, ''Porsche 911 model''
Image:YF-17 aircraft Plot.jpg, ''YF-17 aircraft Plot''
Image:City rendering.jpg, ''City rendering''

''Porsche 911 model'' (NASTRAN model): The featured plot contains a Mesh plot of a Porsche 911 model imported from a NASTRAN bulk data file. VisIt can read a limited subset of NASTRAN bulk data files, in general enough to import model geometry for visualization.

''YF-17 aircraft Plot'': The featured image displays plots of a CGNS dataset representing a YF-17 jet aircraft. The dataset consists of an unstructured grid with solution. The image was created by using a pseudocolor plot of the dataset's Mach variable, a Mesh plot of the grid, and Vector plot of a slice through the Velocity field.

''City rendering'': An ESRI shapefile containing a polygonal description of the building footprints was read in and then the polygons were resampled onto a rectilinear grid, which was extruded into the featured cityscape.

''Inbound traffic measured'': This image is a visualization study of inbound traffic measured in billions of bytes on the NSFNET T1 backbone for the month of September 1991. The traffic volume range is depicted from purple (zero bytes) to white (100 billion bytes). It represents data collected by Merit Network, Inc.

Organizations

Important laboratories in the field are:
* Electronic Visualization Laboratory
* Kitware
* Los Alamos National Laboratory
* NASA Advanced Supercomputing Division
*National Center for Supercomputing Applications
* Sandia National Laboratory
* San Diego Supercomputer Center
* Scientific Computing and Imaging Institute
* Texas Advanced Computing Center

Conferences in this field, ranked by significance in scientific visualization research, are:
* IEEE Visualization
* SIGGRAPH
* EuroVis
* Conference on Human Factors in Computing Systems (CHI)
* Eurographics
*PacificVis

See further: Computer graphics organizations, Supercomputing facilities

See also

; General
* Data Presentation Architecture
* Data visualization
* Mathematical visualization
* Molecular graphics
* Skin friction line
* Sonification
* Tensor glyph
* Visual analytics

;Publications
* ACM Transactions on Graphics
* IEEE Transactions on Visualization and Computer Graphics
* SIAM Journal on Scientific Computing
* The Visualization Handbook

;Software
* Amira
* Avizo
* Baudline
* Bitplane
* Datacopia
* Dataplot
* MeVisLab
* NCAR Command Language
* Orange
* Origin
* ParaView
* Tecplot
* tomviz
* VAPOR
* Vis5D
* VisAD
* VisIt
* VTK
* :Free data visualization software

References

Further reading

* Charles D. Hansen and Christopher R. Johnson (eds.) (2005). '' The Visualization Handbook''. Elsevier.
* Bruce H. McCormick, Thomas A. DeFanti and Maxine D. Brown (eds.) (1987). ''Visualization in Scientific Computing''. ACM Press.
* Gregory M. Nielson, Hans Hagen and Heinrich Müller (1997)
''Scientific Visualization: Overviews, Methodologies, and Techniques''
IEEE Computer Society.
* Clifford A. Pickover (ed.) (1994). ''Frontiers of Scientific Visualization''. New York: John Willey Inc.
* Lawrence J. Rosenblum (ed.) (1994). ''Scientific Visualization: Advances and challenges''. Academic Press.
* Will Schroeder, Ken Martin, Bill Lorensen (2003).
The Visualization Toolkit
'. Kitware, Inc.
* Leland Wilkinson (2005)
''The Grammar of Graphics''
Springer.

External links

Scientific Visualizations, with an overview of applications.



NASA Scientific Visualization Studio
They facilitate scientific inquiry and outreach within NASA programs through visualization.

Subunit Studios Scientific and Molecular Visualization Studio
Scientific illustration and animation services for scientists by scientists.

scienceviz.com - Scientific Vizualisation, Simulation and CG Animation for Universities, Architects and Engineers
{{Visualization

Articles containing video clips