Vacuum permittivity, commonly denoted (pronounced "epsilon nought" or "epsilon zero"), is the value of the Permittivity, absolute dielectric permittivity of classical vacuum. It may also be referred to as the permittivity of free space, the electric constant, or the distributed capacitance of the vacuum. It is an ideal (baseline) physical constant. Its CODATA value is: : (farads per meter), with a relative uncertainty of It is a measure of how dense of an electric field is "permitted" to form in response to electric charges, and relates the units for electric charge to mechanical quantities such as length and force. For example, the force between two separated electric charges with spherical symmetry (in the Vacuum#Electromagnetism, vacuum of classical electromagnetism) is given by Coulomb's law: :

F_\text = \frac  \frac

Here, ''q''₁ and ''q''₂ are the charges, ''r'' is the distance between their centres, and the value of the constant fraction

1/4 \pi \varepsilon_0

(known as the Coulomb constant, ''k''_e) is approximately 9 × 10⁹ N⋅m²⋅C⁻². Likewise, ''ε''₀ appears in Maxwell's equations, which describe the properties of Electric field, electric and magnetic fields and electromagnetic radiation, and relate them to their sources. In electrical engineering, ''ε''₀ itself is used as a unit to quantify the permittivity of various dielectric materials.

Value

The value of ''ε''₀ is ''defined'' by the formula The approximate numerical value is found at: This formula determining the exact value of ''ε''₀ is found in Table 1, p. 637 of :

\varepsilon_0 =\frac

where ''c'' is the defined value for the speed of light in classical vacuum in International System of Units, SI units, and ''μ''₀ is the parameter that international Standards Organizations call the "magnetic constant" (commonly called vacuum permeability or the permeability of free space). Since ''μ''₀ has an approximate value 4π × 10⁻⁷ Henry (unit), H/meter, m, and ''c'' has the ''defined'' value m⋅s⁻¹, it follows that ''ε''₀ can be expressed numerically as :

\begin
  \varepsilon_0 & \approx \frac \\[2pt]
                & = \frac \, \textrm \\[2pt]
                & \approx 8.85418781762039 \times 10^ \, \textrm\textrm^
\end

:(or Ampere, A²⋅second, s⁴⋅kilogram, kg⁻¹⋅meter, m⁻³ in SI base units, or Coulomb, C²⋅Newton (unit), N⁻¹⋅meter, m⁻² or Coulomb, C⋅Volt, V⁻¹⋅meter, m⁻¹ using other SI coherent units).. The historical origins of the electric constant ''ε''₀, and its value, are explained in more detail below.

Redefinition of the SI units

The ampere was redefined by defining the elementary charge as an exact number of coulombs as from 20 May 2019, with the effect that the vacuum electric permittivity no longer has an exactly determined value in SI units. The value of the electron charge became a numerically defined quantity, not measured, making ''μ''₀ a measured quantity. Consequently, ''ε''₀ is not exact. As before, it is defined by the equation , and is thus determined by the value of ''μ''₀, the Vacuum permeability, magnetic vacuum permeability which in turn is determined by the experimentally determined dimensionless fine-structure constant ''α'': :

\varepsilon_0 = \frac  = \frac \ ,

with ''e'' being the elementary charge, ''h'' being the Planck constant, and ''c'' being the speed of light in Vacuum#In electromagnetism, vacuum, each with exactly defined values. The relative uncertainty in the value of ''ε''₀ is therefore the same as that for the dimensionless fine-structure constant, namely

Terminology

Historically, the parameter ''ε''₀ has been known by many different names. The terms "vacuum permittivity" or its variants, such as "permittivity in/of vacuum", "permittivity of empty space", or "permittivity of free space"B. E. A. Saleh and M. C. Teich, ''Fundamentals of Photonics'' (Wiley, 1991) are widespread. Standards Organizations worldwide now use "electric constant" as a uniform term for this quantity, and official standards documents have adopted the term (although they continue to list the older terms as synonyms). Another historical synonym was "dielectric constant of vacuum", as "dielectric constant" was sometimes used in the past for the absolute permittivity. However, in modern usage "dielectric constant" typically refers exclusively to a relative permittivity ''ε''/''ε''₀ and even this usage is considered "obsolete" by some standards bodies in favor of relative static permittivity. Hence, the term "dielectric constant of vacuum" for the electric constant ''ε''₀ is considered obsolete by most modern authors, although occasional examples of continuing usage can be found. As for notation, the constant can be denoted by either

\varepsilon_0\,

\epsilon_0\,

, using either of the common glyphs for the letter epsilon.

Historical origin of the parameter ''ε''₀

As indicated above, the parameter ''ε''₀ is a measurement-system constant. Its presence in the equations now used to define electromagnetic quantities is the result of the so-called "rationalization" process described below. But the method of allocating a value to it is a consequence of the result that Maxwell's equations predict that, in free space, electromagnetic waves move with the speed of light. Understanding why ''ε''₀ has the value it does requires a brief understanding of the history.

Rationalization of units

The experiments of Charles-Augustin de Coulomb, Coulomb and others showed that the force ''F'' between two equal point-like "amounts" of electricity, situated a distance ''r'' apart in free space, should be given by a formula that has the form :

F = k_ \frac,

where ''Q'' is a quantity that represents the amount of electricity present at each of the two points, and ''k''_e is the Coulomb constant. If one is starting with no constraints, then the value of ''k''_e may be chosen arbitrarily.For an introduction to the subject of choices for independent units, see For each different choice of ''k''_e there is a different "interpretation" of ''Q'': to avoid confusion, each different "interpretation" has to be allocated a distinctive name and symbol. In one of the systems of equations and units agreed in the late 19th century, called the "centimeter–gram–second electrostatic system of units" (the cgs esu system), the constant ''k''_e was taken equal to 1, and a quantity now called "Gaussian units#Unit of charge, Gaussian electric charge" ''q''_s was defined by the resulting equation :

F = \frac.

The unit of Gaussian charge, the statcoulomb, is such that two units, a distance of 1 centimeter apart, repel each other with a force equal to the cgs unit of force, the dyne. Thus, the unit of Gaussian charge can also be written 1 dyne^1/2 cm. "Gaussian electric charge" is not the same mathematical quantity as modern (MKS system of units, MKS and subsequently the International System of Units, SI) electric charge and is not measured in coulombs. The idea subsequently developed that it would be better, in situations of spherical geometry, to include a factor 4π in equations like Coulomb's law, and write it in the form: :

F = k'_ \frac.

This idea is called "rationalization". The quantities ''q''_s′ and ''k''_e′ are not the same as those in the older convention. Putting generates a unit of electricity of different size, but it still has the same dimensions as the cgs esu system. The next step was to treat the quantity representing "amount of electricity" as a fundamental quantity in its own right, denoted by the symbol ''q'', and to write Coulomb's Law in its modern form: :

\ F = \frac \frac.

The system of equations thus generated is known as the rationalized meter–kilogram–second (rmks) equation system, or "meter–kilogram–second–ampere (mksa)" equation system. This is the system used to define the SI units. The new quantity ''q'' is given the name "rmks electric charge", or (nowadays) just "electric charge". The quantity ''q''_s used in the old cgs esu system is related to the new quantity ''q'' by: :

\ q_ = \frac

Determination of a value for ''ε''₀

One now adds the requirement that one wants force to be measured in newtons, distance in meters, and charge to be measured in the engineers' practical unit, the coulomb, which is defined as the charge accumulated when a current of 1 ampere flows for one second. This shows that the parameter ''ε''₀ should be allocated the unit C²⋅N⁻¹⋅m⁻² (or equivalent units – in practice "farads per meter"). In order to establish the numerical value of ''ε''₀, one makes use of the fact that if one uses the rationalized forms of Coulomb's law and Ampère's force law (and other ideas) to develop Maxwell's equations, then the relationship stated above is found to exist between ''ε''₀, ''μ''₀ and ''c''₀. In principle, one has a choice of deciding whether to make the coulomb or the ampere the fundamental unit of electricity and magnetism. The decision was taken internationally to use the ampere. This means that the value of ''ε''₀ is determined by the values of ''c''₀ and ''μ''₀, as stated above. For a brief explanation of how the value of ''μ''₀ is decided, see ''Vacuum permeability''.

Permittivity of real media

By convention, the electric constant ''ε''₀ appears in the relationship that defines the electric displacement field D in terms of the electric field E and classical electrical polarization density P of the medium. In general, this relationship has the form: :

\mathbf = \varepsilon_0 \mathbf + \mathbf.

For a linear dielectric, P is assumed to be proportional to E, but a delayed response is permitted and a spatially non-local response, so one has: :

\mathbf D (\mathbf r,\ t) = \int_^t dt' \int d^3 \mathbf r'\ \varepsilon \left(\mathbf r,\ t; \mathbf r',\ t'\right) \mathbf E\left(\mathbf r',\ t'\right).

In the event that nonlocality and delay of response are not important, the result is: :

\mathbf = \varepsilon \mathbf = \varepsilon_ \varepsilon_0 \mathbf

where ''ε'' is the permittivity and ''ε''_r the relative static permittivity. In the Vacuum#In electromagnetism, vacuum of classical electromagnetism, the polarization , so and .

Notes

{{DEFAULTSORT:Vacuum Permittivity Electromagnetism Fundamental constants