Neutron Flux

The neutron flux, φ, is a scalar quantity used in nuclear physics and nuclear reactor physics. It is the total length travelled by all free neutrons per unit time and volume. Equivalently, it can be defined as the number of neutrons travelling through a small sphere of radius $R$ in a time interval, divided by $\pi R^2$ (the cross section of the sphere) and by the time interval. The usual unit is cm⁻²s⁻¹ (neutrons per centimeter squared per second).

The neutron fluence is defined as the neutron flux integrated over a certain time period, so its usual unit is cm⁻² (neutrons per centimeter squared). An older term used instead of cm⁻² was n.v.t. (neutrons, velocity, time).

Natural neutron flux

Neutron flux in asymptotic giant branch stars and in supernovae is responsible for most of the natural nucleosynthesis producing elements heavier than iron. In stars there is a relatively low neutron flux on the order of 10⁵ to 10¹¹ cm⁻² s⁻¹, resulting in nucleosynthesis by the s-process ( slow neutron-capture process). By contrast, after a core-collapse supernova, there is an extremely high neutron flux, on the order of 10³² cm⁻² s⁻¹, resulting in nucleosynthesis by the r-process ( rapid neutron-capture process).

Earth atmospheric neutron flux, apparently from thunderstorms, can reach levels of 3·10⁻² to 9·10⁺¹ cm⁻² s⁻¹. However, recent results (considered invalid by the original investigators) obtained with unshielded scintillation neutron detectors show a decrease in the neutron flux during thunderstorms. Recent research appears to support lightning generating 10¹³–10¹⁵ neutrons per discharge via photonuclear processes.

Artificial neutron flux

Artificial neutron flux refers to neutron flux which is man-made, either as byproducts from weapons or nuclear energy production or for a specific application such as from a research reactor or by spallation. A flow of neutrons is often used to initiate the fission of unstable large nuclei. The additional neutron(s) may cause the nucleus to become unstable, causing it to decay (split) to form more stable products. This effect is essential in fission reactors and nuclear weapons.

Within a nuclear fission reactor, the neutron flux is the primary quantity measured to control the reaction inside. The flux shape is the term applied to the density or relative strength of the flux as it moves around the reactor. Typically the strongest neutron flux occurs in the middle of the reactor core, becoming lower toward the edges. The higher the neutron flux the greater the chance of a nuclear reaction occurring as there are more neutrons going through an area per unit time.

Reactor vessel wall neutron fluence

A reactor vessel of a typical nuclear power plant ( PWR) endures in 40 years (32 full reactor years) of operation approximately 6.5×10¹⁹ cm⁻² ( ''E'' > 1 MeV) of neutron fluence.Nuclear Power Plant Borssele Reactor Pressure Vessel Safety Assessment
p. 29, 5.6 Neutron Fluence Calculation. Neutron flux causes reactor vessels to suffer from neutron embrittlement.

See also

* Neutron radiation
* Neutron transport

References

{{DEFAULTSORT:Neutron Flux
Flux