n-pentane

Pentane is an organic compound with the formula C₅H₁₂—that is, an alkane with five carbon atoms. The term may refer to any of three structural isomers, or to a mixture of them: in the IUPAC nomenclature, however, pentane means exclusively the ''n''-pentane isomer; the other two are called isopentane (methylbutane) and neopentane (dimethylpropane). Cyclopentane is not an isomer of pentane because it has only 10 hydrogen atoms where pentane has 12.

Pentanes are components of some fuels and are employed as specialty solvents in the laboratory. Their properties are very similar to those of butanes and hexanes.

Industrial uses

Pentanes are some of the primary blowing agents used in the production of polystyrene foam and other foams. Usually, a mixture of n-, i-, and increasingly cyclopentane is used for this purpose.

Acid-catalyzed isomerization gives isopentane, which is used in producing high-octane fuels.

Because of their low boiling points, low cost, and relative safety, pentanes are used as a working medium in geothermal power stations and organic Rankine cycles. It is also used in some blended refrigerants.

Pentanes are solvents in many ordinary products, e.g. in some pesticides.

Laboratory use

Pentanes are relatively inexpensive and are the most volatile liquid alkanes at room temperature, so they are often used in the laboratory as solvents that can be conveniently and rapidly evaporated. However, because of their nonpolarity and lack of functionality, they dissolve only nonpolar and alkyl-rich compounds. Pentanes are miscible with most common nonpolar solvents such as chlorocarbons, aromatics, and ethers.

They are often used in liquid chromatography.

Physical properties

The boiling points of the pentane isomers range from about 9 to 36 °C. As is the case for other alkanes, the more thickly branched isomers tend to have lower boiling points.

The same tends to be true for the melting points of alkane isomers, and that of isopentane is 30 °C lower than that of ''n''-pentane. However, the melting point of neopentane, the most heavily branched of the three, is 100 °C ''higher'' than that of isopentane. The anomalously high melting point of neopentane has been attributed to the tetrahedral molecules packing more closely in solid form; this explanation is contradicted by the fact that neopentane has a lower density than the other two isomers, and the high melting point is actually caused by neopentane’s significantly lower entropy of fusion.

The branched isomers are more stable (have lower heat of formation and heat of combustion) than n-pentane. The difference is 1.8 kcal/ mol for isopentane, and 5 kcal/mol for neopentane.

Rotation about two central single C-C bonds of ''n''-pentane produces four different conformations.

Reactions and occurrence

Like other alkanes, pentanes are largely unreactive at standard room temperature and conditions - however, with sufficient activation energy (e.g., an open flame), they readily oxidize to form carbon dioxide and water:
:C₅H₁₂ + 8 O₂ → 5 CO₂ + 6 H₂O + heat/energy

Like other alkanes, pentanes undergo free radical chlorination:
:C₅H₁₂ + Cl₂ → C₅H₁₁Cl + HCl
Such reactions are unselective; with ''n''-pentane, the result is a mixture of the 1-, 2-, and 3-chloropentanes, as well as more highly chlorinated derivatives. Other radical halogenations can also occur.

Pentane is a component of exhaled breath for some individuals. A degradation product of unsaturated fatty acids, its presence is associated with certain diseases and cancers.

References

External links

International Chemical Safety Card 0534
at ILO.org

at CDC.gov
Phytochemical data for pentane
at Ars-grin.gov

{{Hydrides by group

Alkanes
Hydrocarbon solvents