HOME

TheInfoList



OR:

Lower flammability limit (LFL), usually expressed in volume per cent, is the lower end of the concentration range over which a flammable mixture of gas or vapour in air can be ignited at a given temperature and pressure. The flammability range is delineated by the upper and lower flammability limits. Outside this range of air/vapor mixtures, the mixture can not be ignited (unless the temperature and pressure are increased). The LFL decreases with increasing temperature; thus, a mixture that is below its LFL at a given temperature may be ignitable if heated sufficiently. For liquids, the LFL is typically close to the saturated vapor concentration at the
flash point The flash point of a material is the "lowest liquid temperature at which, under certain standardized conditions, a liquid gives off vapours in a quantity such as to be capable of forming an ignitable vapour/air mixture". (EN 60079-10-1) The fl ...
, however, due to differences in the liquid properties, the relationship of LFL to flash point (which is also dependent on the test apparatus) is not fixed and some spread in the data usually exists. The LFL_ of a mixture can be evaluated using the Le Chatelier mixing rule, if the LFL_ of the components i are known:Le Chatelier, H. Notes sur le dosage du grisou par les limites d’inflammabilité. Ann. Mines 388–395 (1891). LFL_=\frac Where LFL_ is the lower flammability of the mixture, LFL_ is the lower flammability of the i-th component of the mixture, and x_ is the molar fraction of the i-th component of the mixture.


See also

*
Flammability limit Mixtures of dispersed combustible materials (such as gaseous or vaporised fuels, and some dusts) and oxygen in the air will burn only if the fuel concentration lies within well-defined lower and upper bounds determined experimentally, referred to a ...
*
Flammability A combustible material is something that can burn (i.e., ''combust'') in air. A combustible material is flammable if it ignites easily at ambient temperatures. In other words, a combustible material ignites with some effort and a flammable mat ...
*
Flash point The flash point of a material is the "lowest liquid temperature at which, under certain standardized conditions, a liquid gives off vapours in a quantity such as to be capable of forming an ignitable vapour/air mixture". (EN 60079-10-1) The fl ...
*
Minimum Ignition Energy The minimum ignition energy (MIE) is a safety characteristic in explosion protection and prevention which determines the ignition capability of fuel-air mixtures, where the fuel may be combustible vapor, gas or dust. It is defined as the minimum e ...
*
Petroleum Petroleum, also known as crude oil, or simply oil, is a naturally occurring yellowish-black liquid mixture of mainly hydrocarbons, and is found in geological formations. The name ''petroleum'' covers both naturally occurring unprocessed crud ...
*
Stoichiometry Stoichiometry refers to the relationship between the quantities of reactants and products before, during, and following chemical reactions. Stoichiometry is founded on the law of conservation of mass where the total mass of the reactants equ ...
*
Upper flammable limit Mixtures of dispersed combustible materials (such as gaseous or vaporised fuels, and some dusts) and oxygen in the air will burn only if the fuel concentration lies within well-defined lower and upper bounds determined experimentally, referred to a ...


References

Chemical properties Fire {{chem-stub