A jib is a triangular sail that sets ahead of the
foremast
The mast of a sailing vessel is a tall spar, or arrangement of spars, erected more or less vertically on the centre-line of a ship or boat. Its purposes include carrying sails, spars, and derricks, and giving necessary height to a navigation ...
of a
sailing vessel. Its
tack
TACK is a group of archaea acronym for Thaumarchaeota (now Nitrososphaerota), Aigarchaeota, Crenarchaeota (now Thermoproteota), and Korarchaeota, the first groups discovered. They are found in different environments ranging from acidophilic ...
is fixed to the
bowsprit
The bowsprit of a sailing vessel is a spar extending forward from the vessel's prow. The bowsprit is typically held down by a bobstay
A bobstay is a part of the rigging of a sailing boat or ship. Its purpose is to counteract the upward tensio ...
, to the
bows, or to the
deck between the bowsprit and the foremost mast. Jibs and
spinnaker
A spinnaker is a sail designed specifically for sailing off the wind on courses between a reach (wind at 90° to the course) to downwind (course in the same direction as the wind). Spinnakers are constructed of lightweight fabric, usually ny ...
s are the two main types of
headsails on a modern boat.
Modern yachts and small craft
Boats may be sailed using a jib alone, but more commonly jibs make a minor direct contribution to propulsion compared to a
main sail. Generally, a jib's most crucial function is as an
airfoil
An airfoil (American English) or aerofoil (British English) is the cross-sectional shape of an object whose motion through a gas is capable of generating significant lift, such as a wing, a sail, or the blades of propeller, rotor, or turbin ...
, increasing performance and overall stability by reducing
turbulence
In fluid dynamics, turbulence or turbulent flow is fluid motion characterized by chaotic changes in pressure and flow velocity. It is in contrast to a laminar flow, which occurs when a fluid flows in parallel layers, with no disruption between ...
on the main sail's
leeward
Windward () and leeward () are terms used to describe the direction of the wind. Windward is ''upwind'' from the point of reference, i.e. towards the direction from which the wind is coming; leeward is ''downwind'' from the point of reference ...
side.
On boats with only one jib, it is common for the
clew of the jib to be abaft the mast, meaning the jib and mainsail overlap. An overlapping jib is called a ''genoa jib'' or simply a
genoa
Genoa ( ; it, Genova ; lij, Zêna ). is the capital of the Italian region of Liguria and the sixth-largest city in Italy. In 2015, 594,733 people lived within the city's administrative limits. As of the 2011 Italian census, the Province of ...
(see illustration). These are efficiently used when
reaching more broadly than a
close reach. Alternatively, a boat may carry smaller jibs, to compensate aerodynamics when the main sail is
reefed; these more rugged sails are called ''storm jibs'' or ''spitfires''.
On a boat with two
staysail
A staysail ("stays'l") is a fore-and-aft rigged sail whose luff can be affixed to a stay running forward (and most often but not always downwards) from a mast to the deck, the bowsprit, or to another mast.
Description
Most staysails are ...
s the inner sail is called the ''staysail'', and the outer (foremost) is called the jib. This combination of two staysails is called a ''cutter rig'' (or in North America a ''yankee pair'') and a boat with one mast rigged with two staysails and a mainsail is called a
cutter.
On cruising yachts, and nearly all racing sailboats, the jib needs to be worked when tacking. On these yachts, there are two sheets attached to the
clew of the jib. As the yacht comes
head to wind during a tack, the active sheet is released, and the other sheet (the ''lazy sheet'') on the other side of the boat is pulled in. This sheet becomes the new ''active sheet'' until the next tack.
Traditional vessels
Schooner
A schooner () is a type of sailing vessel defined by its rig: fore-and-aft rigged on all of two or more masts and, in the case of a two-masted schooner, the foremast generally being shorter than the mainmast. A common variant, the topsail schoo ...
s typically have up to three jibs. The foremost one sets on the topmast
forestay
On a sailing vessel, a forestay, sometimes just called a stay, is a piece of standing rigging which keeps a mast from falling backwards. It is attached either at the very top of the mast, or in fractional rigs between about 1/8 and 1/4 from the t ...
and is generally called the ''jib topsail'', a second on the main forestay is called ''the jib'', and the innermost is called ''the staysail''. Actually, all three sails are both jibs and
staysail
A staysail ("stays'l") is a fore-and-aft rigged sail whose luff can be affixed to a stay running forward (and most often but not always downwards) from a mast to the deck, the bowsprit, or to another mast.
Description
Most staysails are ...
s in the generic sense.
Original usage in 18th and 19th century
square-rigged ships distinguished between the fore staysail, set on the
forestay
On a sailing vessel, a forestay, sometimes just called a stay, is a piece of standing rigging which keeps a mast from falling backwards. It is attached either at the very top of the mast, or in fractional rigs between about 1/8 and 1/4 from the t ...
running from the foremast head to the ship's peak, the foremost part of the hull, and the jibs set on stays running to the bowsprit. Jibs, but not staysails, could also be "set flying," i.e. not attached to the standing rigging. Sails set beyond the peak were typically called jibs, set on stays running from the fore
topmast
The masts of traditional sailing ships were not single spars, but were constructed of separate sections or masts, each with its own rigging. The topmast is one of these.
The topmast is semi-permanently attached to the upper front of the lower m ...
to the
bowsprit
The bowsprit of a sailing vessel is a spar extending forward from the vessel's prow. The bowsprit is typically held down by a bobstay
A bobstay is a part of the rigging of a sailing boat or ship. Its purpose is to counteract the upward tensio ...
, or the fore
topgallant mast to the
jibboom or even the fore royal mast to the flying jibboom. A large
square-rigged ship typically has four jibs, but could have as many as six.
From forward to aft, these sails are called:
* Jib of jibs
* Spindle jib
* Flying jib
* Outer jib
* Inner jib
* Fore (
topmast
The masts of traditional sailing ships were not single spars, but were constructed of separate sections or masts, each with its own rigging. The topmast is one of these.
The topmast is semi-permanently attached to the upper front of the lower m ...
) staysail.
[
The first two were rarely used except by clipper ships in light winds and were usually set flying.][ A storm jib was a small jib of heavy canvas set to a stay to help to control the ship in bad weather.][
]
Idiom
The jib is referenced in the idiom usually spoken as "I like the cut of your jib", generally seen as signifying approval of one's general appearance or respect for their character. The phrase alludes to the maritime practice of identifying far-away ships by noting the "cut" (general shape and configuration) of their sails to determine their status as friend or foe. One such report from the '' Naval Chronicle'' (1805)—"we perceived by the cut of their sails, then set, that they were French Ships of War"—is often cited as an early inspiration for the idiom.
Sir Walter Scott
Sir Walter Scott, 1st Baronet (15 August 1771 – 21 September 1832), was a Scottish novelist, poet, playwright and historian. Many of his works remain classics of European and Scottish literature, notably the novels '' Ivanhoe'', '' Rob Roy ...
used the expression to denote approval in the 1824 novel '' St. Ronan's Well'': "If she disliked what the sailor calls the ''cut of their jib''". John Russell Bartlett
John Russell Bartlett (October 23, 1805 – May 28, 1886) was an American historian and linguist.
Biography
Bartlett was born in Providence, Rhode Island, on October 23, 1805. In 1819 he was a student at the Lowville Academy in Lowville, New Y ...
later defined the idiom in his 1848 ''Dictionary of Americanisms'' as "The form of his profile, the cast of his countenance". This usage alludes to a frequent variation of meaning which describes approval, specifically, of the shape of one's nose
A nose is a protuberance in vertebrates that houses the nostrils, or nares, which receive and expel air for respiration alongside the mouth. Behind the nose are the olfactory mucosa and the sinuses. Behind the nasal cavity, air next passe ...
, which roughly approximates the frontal position and triangular shape of the jib sail on a boat.
See also
* Lateen sail
*Sail-plan
A sail plan is a description of the specific ways that a sailing craft is rigged. Also, the term "sail plan" is a graphic depiction of the arrangement of the sails for a given sailing craft.>
In the English language, ships were usually describe ...
References
{{Sail Types, state=expanded
Sailing rigs and rigging
Shipbuilding
Sailboat components
Sailing ship components
Nautical terminology