A spheroid, or ellipsoid of revolution, is a quadric surface obtained by rotating an ellipse about one of its principal axes; in other words, an ellipsoid with two equal semi-diameters. A spheroid has circular symmetry.
If the ellipse is rotated about its major axis, the result is a ''prolate'' (elongated) spheroid, shaped like an American football or rugby ball. If the ellipse is rotated about its minor axis, the result is an ''oblate'' (flattened) spheroid, shaped like a lentil or a plain M&M. If the generating ellipse is a circle, the result is a sphere.
Due to the combined effects of gravity and rotation, the figure of the Earth (and of all planets) is not quite a sphere, but instead is slightly flattened in the direction of its axis of rotation. For that reason, in cartography and geodesy the Earth is often approximated by an oblate spheroid, known as the reference ellipsoid, instead of a sphere. The current World Geodetic System model uses a spheroid whose radius is at the Equator and at the poles.
The word ''spheroid'' originally meant "an approximately spherical body", admitting irregularities even beyond the bi- or tri-axial ellipsoidal shape, and that is how the term is used in some older papers on geodesy (for example, referring to truncated spherical harmonic expansions of the Earth).

Equation

The equation of a tri-axial ellipsoid centred at the origin with semi-axes , and aligned along the coordinate axes is :$\backslash frac+\backslash frac+\backslash frac\; =\; 1.$ The equation of a spheroid with as the symmetry axis is given by setting : :$\backslash frac+\backslash frac=1.$ The semi-axis is the equatorial radius of the spheroid, and is the distance from centre to pole along the symmetry axis. There are two possible cases: * : oblate spheroid * : prolate spheroid The case of reduces to a sphere.

Properties

Area

An oblate spheroid with has surface area :$S\_\; =\; 2\backslash pi\; a^2\backslash left(1+\backslash frac\backslash text\backslash ,\; e\backslash right)=2\backslash pi\; a^2+\backslash pi\; \backslash frac\backslash ln\; \backslash left(\; \backslash frac\backslash right)\; \backslash quad\; \backslash mbox\; \backslash quad\; e^2=1-\backslash frac.$ The oblate spheroid is generated by rotation about the -axis of an ellipse with semi-major axis and semi-minor axis , therefore may be identified as the eccentricity. (See ellipse.) A prolate spheroid with has surface area :$S\_\; =\; 2\backslash pi\; a^2\backslash left(1+\backslash frac\backslash arcsin\; \backslash ,\; e\backslash right)\; \backslash qquad\; \backslash mbox\; \backslash qquad\; e^2=1-\backslash frac.$ The prolate spheroid is generated by rotation about the -axis of an ellipse with semi-major axis and semi-minor axis ; therefore, may again be identified as the eccentricity. (See ellipse.) These formulas are identical in the sense that the formula for can be used to calculate the surface area of a prolate spheroid and vice versa. However, then becomes imaginary and can no longer directly be identified with the eccentricity. Both of these results may be cast into many other forms using standard mathematical identities and relations between parameters of the ellipse.

Volume

The volume inside a spheroid (of any kind) is $\backslash frac3a^2c\backslash approx4.19a^2c$. If $A=2a$ is the equatorial diameter, and $C=2c$ is the polar diameter, the volume is $\backslash frac\backslash pi6A^2C\backslash approx0.523A^2C$.

Curvature

If a spheroid is parameterized as :$\backslash vec\; \backslash sigma\; (\backslash beta,\backslash lambda)\; =\; (a\; \backslash cos\; \backslash beta\; \backslash cos\; \backslash lambda,\; a\; \backslash cos\; \backslash beta\; \backslash sin\; \backslash lambda,\; c\; \backslash sin\; \backslash beta);\backslash ,\backslash !$ where is the ''reduced'' or ''parametric latitude'', is the longitude, and and , then its Gaussian curvature is :$K(\backslash beta,\backslash lambda)\; =\; ;\backslash ,\backslash !$ and its mean curvature is :$H(\backslash beta,\backslash lambda)\; =\; .\backslash ,\backslash !$ Both of these curvatures are always positive, so that every point on a spheroid is elliptic.

Aspect ratio

The aspect ratio of an oblate spheroid/ellipse, , is the ratio of the polar to equatorial lengths, while the flattening (also called oblateness) , is the ratio of the equatorial-polar length difference to the equatorial length: :$f\; =\; \backslash frac\; =\; 1\; -\; \backslash frac\; .$ The first eccentricity (usually simply eccentricity, as above) is often used instead of flattening. It is defined by: : $e\; =\; \backslash sqrt$ The relations between eccentricity and flattening are: : $e\; =\; \backslash sqrt$, : $f\; =\; 1\; -\; \backslash sqrt$ All modern geodetic ellipsoids are defined by the semi-major axis plus either the semi-minor axis (giving the aspect ratio), the flattening, or the first eccentricity. While these definitions are mathematically interchangeable, real-world calculations must lose some precision. To avoid confusion, an ellipsoidal definition considers its own values to be exact in the form it gives.

Applications

The most common shapes for the density distribution of protons and neutrons in an atomic nucleus are spherical, prolate, and oblate spheroidal, where the polar axis is assumed to be the spin axis (or direction of the spin angular momentum vector). Deformed nuclear shapes occur as a result of the competition between electromagnetic repulsion between protons, surface tension and quantum shell effects.

Oblate spheroids

The oblate spheroid is the approximate shape of rotating planets and other celestial bodies, including Earth, Saturn, Jupiter, and the quickly spinning star Altair. Saturn is the most oblate planet in the Solar System, with a flattening of 0.09796. Enlightenment scientist Isaac Newton, working from Jean Richer's pendulum experiments and Christiaan Huygens's theories for their interpretation, reasoned that Jupiter and Earth are oblate spheroids owing to their centrifugal force. Earth's diverse cartographic and geodetic systems are based on reference ellipsoids, all of which are oblate. A science-fiction example of an extremely oblate planet is Mesklin from Hal Clement's novel ''Mission of Gravity''.

Prolate spheroids

The prolate spheroid is the approximate shape of the ball in several sports, such as in rugby football. Several moons of the Solar System approximate prolate spheroids in shape, though they are actually triaxial ellipsoids. Examples are Saturn's satellites Mimas, Enceladus, and Tethys and Uranus' satellite Miranda. In contrast to being distorted into oblate spheroids via rapid rotation, celestial objects distort slightly into prolate spheroids via tidal forces when they orbit a massive body in a close orbit. The most extreme example is Jupiter's moon Io, which becomes slightly more or less prolate in its orbit due to a slight eccentricity, causing intense volcanism. The major axis of the prolate spheroid does not run through the satellite's poles in this case, but through the two points on its equator directly facing toward and away from the primary. The term is also used to describe the shape of some nebulae such as the Crab Nebula. Fresnel zones, used to analyze wave propagation and interference in space, are a series of concentric prolate spheroids with principal axes aligned along the direct line-of-sight between a transmitter and a receiver. The atomic nuclei of the actinide and lanthanide elements are shaped like prolate spheroids. In anatomy, near-spheroid organs such as testis may be measured by their long and short axes. Many submarines have a shape which can be described as prolate spheroid.

Dynamical properties

For a spheroid having uniform density, the moment of inertia is that of an ellipsoid with an additional axis of symmetry. Given a description of a spheroid as having a major axis , and minor axes and , the moments of inertia along these principal axes are , , and . However, in a spheroid the minor axes are symmetrical. Therefore, our inertial terms along the major axes are: :$A\; =\; B\; =\; \backslash fracM(a^2+c^2),$ :$C\; =\; \backslash fracM(a^2+a^2)\; =\backslash fracM(a^2),$ where is the mass of the body defined as :$M\; =\; \backslash frac\backslash pi\backslash rho\; ca^2\; .$

See also

* Ellipsoidal dome * Equatorial bulge * Lentoid * Oblate spheroidal coordinates * Ovoid * Prolate spheroidal coordinates * Rotation of axes * Translation of axes

References

{{reflist Category:Surfaces Category:Quadrics

Equation

The equation of a tri-axial ellipsoid centred at the origin with semi-axes , and aligned along the coordinate axes is :$\backslash frac+\backslash frac+\backslash frac\; =\; 1.$ The equation of a spheroid with as the symmetry axis is given by setting : :$\backslash frac+\backslash frac=1.$ The semi-axis is the equatorial radius of the spheroid, and is the distance from centre to pole along the symmetry axis. There are two possible cases: * : oblate spheroid * : prolate spheroid The case of reduces to a sphere.

Properties

Area

An oblate spheroid with has surface area :$S\_\; =\; 2\backslash pi\; a^2\backslash left(1+\backslash frac\backslash text\backslash ,\; e\backslash right)=2\backslash pi\; a^2+\backslash pi\; \backslash frac\backslash ln\; \backslash left(\; \backslash frac\backslash right)\; \backslash quad\; \backslash mbox\; \backslash quad\; e^2=1-\backslash frac.$ The oblate spheroid is generated by rotation about the -axis of an ellipse with semi-major axis and semi-minor axis , therefore may be identified as the eccentricity. (See ellipse.) A prolate spheroid with has surface area :$S\_\; =\; 2\backslash pi\; a^2\backslash left(1+\backslash frac\backslash arcsin\; \backslash ,\; e\backslash right)\; \backslash qquad\; \backslash mbox\; \backslash qquad\; e^2=1-\backslash frac.$ The prolate spheroid is generated by rotation about the -axis of an ellipse with semi-major axis and semi-minor axis ; therefore, may again be identified as the eccentricity. (See ellipse.) These formulas are identical in the sense that the formula for can be used to calculate the surface area of a prolate spheroid and vice versa. However, then becomes imaginary and can no longer directly be identified with the eccentricity. Both of these results may be cast into many other forms using standard mathematical identities and relations between parameters of the ellipse.

Volume

The volume inside a spheroid (of any kind) is $\backslash frac3a^2c\backslash approx4.19a^2c$. If $A=2a$ is the equatorial diameter, and $C=2c$ is the polar diameter, the volume is $\backslash frac\backslash pi6A^2C\backslash approx0.523A^2C$.

Curvature

If a spheroid is parameterized as :$\backslash vec\; \backslash sigma\; (\backslash beta,\backslash lambda)\; =\; (a\; \backslash cos\; \backslash beta\; \backslash cos\; \backslash lambda,\; a\; \backslash cos\; \backslash beta\; \backslash sin\; \backslash lambda,\; c\; \backslash sin\; \backslash beta);\backslash ,\backslash !$ where is the ''reduced'' or ''parametric latitude'', is the longitude, and and , then its Gaussian curvature is :$K(\backslash beta,\backslash lambda)\; =\; ;\backslash ,\backslash !$ and its mean curvature is :$H(\backslash beta,\backslash lambda)\; =\; .\backslash ,\backslash !$ Both of these curvatures are always positive, so that every point on a spheroid is elliptic.

Aspect ratio

The aspect ratio of an oblate spheroid/ellipse, , is the ratio of the polar to equatorial lengths, while the flattening (also called oblateness) , is the ratio of the equatorial-polar length difference to the equatorial length: :$f\; =\; \backslash frac\; =\; 1\; -\; \backslash frac\; .$ The first eccentricity (usually simply eccentricity, as above) is often used instead of flattening. It is defined by: : $e\; =\; \backslash sqrt$ The relations between eccentricity and flattening are: : $e\; =\; \backslash sqrt$, : $f\; =\; 1\; -\; \backslash sqrt$ All modern geodetic ellipsoids are defined by the semi-major axis plus either the semi-minor axis (giving the aspect ratio), the flattening, or the first eccentricity. While these definitions are mathematically interchangeable, real-world calculations must lose some precision. To avoid confusion, an ellipsoidal definition considers its own values to be exact in the form it gives.

Applications

The most common shapes for the density distribution of protons and neutrons in an atomic nucleus are spherical, prolate, and oblate spheroidal, where the polar axis is assumed to be the spin axis (or direction of the spin angular momentum vector). Deformed nuclear shapes occur as a result of the competition between electromagnetic repulsion between protons, surface tension and quantum shell effects.

Oblate spheroids

The oblate spheroid is the approximate shape of rotating planets and other celestial bodies, including Earth, Saturn, Jupiter, and the quickly spinning star Altair. Saturn is the most oblate planet in the Solar System, with a flattening of 0.09796. Enlightenment scientist Isaac Newton, working from Jean Richer's pendulum experiments and Christiaan Huygens's theories for their interpretation, reasoned that Jupiter and Earth are oblate spheroids owing to their centrifugal force. Earth's diverse cartographic and geodetic systems are based on reference ellipsoids, all of which are oblate. A science-fiction example of an extremely oblate planet is Mesklin from Hal Clement's novel ''Mission of Gravity''.

Prolate spheroids

The prolate spheroid is the approximate shape of the ball in several sports, such as in rugby football. Several moons of the Solar System approximate prolate spheroids in shape, though they are actually triaxial ellipsoids. Examples are Saturn's satellites Mimas, Enceladus, and Tethys and Uranus' satellite Miranda. In contrast to being distorted into oblate spheroids via rapid rotation, celestial objects distort slightly into prolate spheroids via tidal forces when they orbit a massive body in a close orbit. The most extreme example is Jupiter's moon Io, which becomes slightly more or less prolate in its orbit due to a slight eccentricity, causing intense volcanism. The major axis of the prolate spheroid does not run through the satellite's poles in this case, but through the two points on its equator directly facing toward and away from the primary. The term is also used to describe the shape of some nebulae such as the Crab Nebula. Fresnel zones, used to analyze wave propagation and interference in space, are a series of concentric prolate spheroids with principal axes aligned along the direct line-of-sight between a transmitter and a receiver. The atomic nuclei of the actinide and lanthanide elements are shaped like prolate spheroids. In anatomy, near-spheroid organs such as testis may be measured by their long and short axes. Many submarines have a shape which can be described as prolate spheroid.

Dynamical properties

For a spheroid having uniform density, the moment of inertia is that of an ellipsoid with an additional axis of symmetry. Given a description of a spheroid as having a major axis , and minor axes and , the moments of inertia along these principal axes are , , and . However, in a spheroid the minor axes are symmetrical. Therefore, our inertial terms along the major axes are: :$A\; =\; B\; =\; \backslash fracM(a^2+c^2),$ :$C\; =\; \backslash fracM(a^2+a^2)\; =\backslash fracM(a^2),$ where is the mass of the body defined as :$M\; =\; \backslash frac\backslash pi\backslash rho\; ca^2\; .$

See also

* Ellipsoidal dome * Equatorial bulge * Lentoid * Oblate spheroidal coordinates * Ovoid * Prolate spheroidal coordinates * Rotation of axes * Translation of axes

References

{{reflist Category:Surfaces Category:Quadrics