An electronic component is any basic discrete device or physical entity in an electronic system used to affect

electrons The electron ( or ) is a subatomic particle with a negative one elementary electric charge. Electrons belong to the first generation of the lepton particle family, and are generally thought to be elementary particles because they have n ...

or their associated fields. Electronic components are mostly

industrial product Industrial production is a measure of output of the industrial sector of the economy. The industrial sector includes manufacturing, mining, and utilities. Although these sectors contribute only a small portion of gross domestic product (GDP), th ...

s, available in a singular form and are not to be confused with electrical elements, which are conceptual abstractions representing idealized electronic components and elements. Electronic components have a number of

electrical terminal Components of an electrical circuit are electrically connected if an electric current can run between them through an electrical conductor. An electrical connector is an electromechanical device used to create an electrical connection betw ...

s or

lead Lead is a chemical element with the symbol Pb (from the Latin ) and atomic number 82. It is a heavy metal that is denser than most common materials. Lead is soft and malleable, and also has a relatively low melting point. When freshly cut, ...

s. These leads connect to other electrical components, often over wire, to create an

electronic circuit An electronic circuit is composed of individual electronic components, such as resistors, transistors, capacitors, inductors and diodes, connected by conductive wires or traces through which electric current can flow. It is a type of electric ...

with a particular function (for example an

amplifier An amplifier, electronic amplifier or (informally) amp is an electronic device that can increase the magnitude of a signal (a time-varying voltage or current). It may increase the power significantly, or its main effect may be to boost t ...

, radio receiver, or oscillator). Basic electronic components may be packaged discretely, as arrays or networks of like components, or integrated inside of packages such as

semiconductor A semiconductor is a material which has an electrical conductivity value falling between that of a conductor, such as copper, and an insulator, such as glass. Its resistivity falls as its temperature rises; metals behave in the opposite way ...

integrated circuit An integrated circuit or monolithic integrated circuit (also referred to as an IC, a chip, or a microchip) is a set of electronic circuits on one small flat piece (or "chip") of semiconductor material, usually silicon. Large numbers of tiny ...

s, hybrid integrated circuits, or

thick film Thick-film technology is used to produce electronic devices/modules such as surface mount devices modules, hybrid integrated circuits, heating elements, integrated passive devices and sensors. Main manufacturing technique is screen printing (stencil ...

devices. The following list of electronic components focuses on the discrete version of these components, treating such packages as components in their own right.

Classification

Components can be classified as passive, active, or electromechanic. The strict physics definition treats passive components as ones that cannot supply energy themselves, whereas a

battery Battery most often refers to: * Electric battery, a device that provides electrical power * Battery (crime), a crime involving unlawful physical contact Battery may also refer to: Energy source *Automotive battery, a device to provide power t ...

would be seen as an active component since it truly acts as a source of energy. However, electronic engineers who perform

circuit analysis A network, in the context of electrical engineering and electronics, is a collection of interconnected components. Network analysis is the process of finding the voltages across, and the currents through, all network components. There are many ...

use a more restrictive definition of passivity. When only concerned with the energy of signals, it is convenient to ignore the so-called DC circuit and pretend that the power supplying components such as

transistor upright=1.4, gate (G), body (B), source (S) and drain (D) terminals. The gate is separated from the body by an insulating layer (pink). A transistor is a semiconductor device used to Electronic amplifier, amplify or electronic switch, switch ...

s or

s is absent (as if each such component had its own battery built in), though it may in reality be supplied by the DC circuit. Then, the analysis only concerns the AC circuit, an abstraction that ignores DC voltages and currents (and the power associated with them) present in the real-life circuit. This fiction, for instance, lets us view an oscillator as "producing energy" even though in reality the oscillator consumes even more energy from a DC power supply, which we have chosen to ignore. Under that restriction, we define the terms as used in

as: * Active components rely on a source of energy (usually from the DC circuit, which we have chosen to ignore) and usually can inject power into a circuit, though this is not part of the definition. Active components include amplifying components such as

s, triode

vacuum tube A vacuum tube, electron tube, valve (British usage), or tube (North America), is a device that controls electric current flow in a high vacuum between electrodes to which an electric potential difference has been applied. The type known as ...

s (valves), and tunnel diodes. * Passive components cannot introduce net energy into the circuit. They also cannot rely on a source of power, except for what is available from the (AC) circuit they are connected to. As a consequence, they cannot amplify (increase the power of a signal), although they may increase a voltage or current (such as is done by a transformer or resonant circuit). Passive components include two-terminal components such as resistors, capacitors, inductors, and transformers. * Electromechanical components can carry out electrical operations by using moving parts or by using electrical connections Most passive components with more than two terminals can be described in terms of two-port parameters that satisfy the principle of reciprocity—though there are rare exceptions. In contrast, active components (with more than two terminals) generally lack that property.

Active components

Semiconductors

Transistors

Transistor upright=1.4, gate (G), body (B), source (S) and drain (D) terminals. The gate is separated from the body by an insulating layer (pink). A transistor is a semiconductor device used to Electronic amplifier, amplify or electronic switch, switch ...

s were considered the invention of the twentieth century that changed electronic circuits forever. A transistor is a semiconductor device used to amplify and switch electronic signals and electrical power. *

Field-effect transistor The field-effect transistor (FET) is a type of transistor that uses an electric field to control the flow of current in a semiconductor. FETs (JFETs or MOSFETs) are devices with three terminals: ''source'', ''gate'', and ''drain''. FETs co ...

s (FET) **

MOSFET The metal–oxide–semiconductor field-effect transistor (MOSFET, MOS-FET, or MOS FET) is a type of field-effect transistor (FET), most commonly fabricated by the controlled oxidation of silicon. It has an insulated gate, the voltage of which d ...

(metal-oxide-semiconductor FET) – by far the most widely manufactured electronic component (also known as MOS transistor) *** PMOS ( p-type MOS) *** NMOS ( n-type MOS) ***

CMOS Complementary metal–oxide–semiconductor (CMOS, pronounced "sea-moss", ) is a type of metal–oxide–semiconductor field-effect transistor (MOSFET) fabrication process that uses complementary and symmetrical pairs of p-type and n-type MOSF ...

(complementary MOS) *** Power MOSFET ****

LDMOS LDMOS (laterally-diffused metal-oxide semiconductor) is a planar double-diffused MOSFET (metal–oxide–semiconductor field-effect transistor) used in amplifiers, including microwave power amplifiers, RF power amplifiers and audio power amplifi ...

(lateral diffused MOSFET) *** MuGFET (multi-gate field-effect transistor) ****

FinFET A fin field-effect transistor (FinFET) is a multigate device, a MOSFET (metal-oxide-semiconductor field-effect transistor) built on a substrate where the gate is placed on two, three, or four sides of the channel or wrapped around the channel, ...

(fin field-effect transistor) ***TFT ( thin-film transistor) **

FeFET A ferroelectric field-effect transistor (Fe FET) is a type of field-effect transistor that includes a ferroelectric material sandwiched between the gate electrode and source-drain conduction region of the device (the channel). Permanent electri ...

(ferroelectric field-effect transistor) **

CNTFET A carbon nanotube field-effect transistor (CNTFET) is a field-effect transistor that utilizes a single carbon nanotube or an array of carbon nanotubes as the channel material instead of bulk silicon in the traditional MOSFET structure. First demo ...

(carbon nanotube field-effect transistor) **

JFET The junction-gate field-effect transistor (JFET) is one of the simplest types of field-effect transistor. JFETs are three-terminal semiconductor devices that can be used as electronically controlled switches or resistors, or to build amplifi ...

(junction field-effect transistor) – N-channel or P-channel ***SIT (

static induction transistor The static induction transistor (SIT) is a type of field-effect transistor (FET) capable of high-speed and high-power operation, with low distortion and low noise. It is a vertical structure device with short multichannel. The device was origina ...

) ** MESFET (metal semiconductor FET) **HEMT ( high-electron-mobility transistor) *Composite transistors ** BiCMOS (bipolar CMOS) **IGBT ( Insulated-gate bipolar transistor) *Other

transistors upright=1.4, gate (G), body (B), source (S) and drain (D) terminals. The gate is separated from the body by an insulating layer (pink). A transistor is a semiconductor device used to Electronic amplifier, amplify or electronic switch, switch ...

** Bipolar junction transistor (BJT, or simply "transistor") – NPN or PNP ***

Photo transistor A photodiode is a light-sensitive semiconductor diode. It produces current when it absorbs photons. The package of a photodiode allows light (or infrared or ultraviolet radiation, or X-rays) to reach the sensitive part of the device. The packa ...

– amplified photodetector ** Darlington transistor – NPN or PNP ***Photo Darlington – amplified photodetector ** Sziklai pair (compound transistor, complementary Darlington) *

Thyristor A thyristor () is a solid-state semiconductor device with four layers of alternating P- and N-type materials used for high-power applications. It acts exclusively as a bistable switch (or a latch), conducting when the gate receives a current ...

s ** Silicon-controlled rectifier (SCR) – passes current only after triggered by a sufficient control voltage on its gate ** TRIAC (TRIode for Alternating Current) – bidirectional SCR **

Unijunction transistor A unijunction transistor (UJT) is a three-lead electronic semiconductor device with only one junction that acts exclusively as an electrically controlled switch. The UJT is not used as a linear amplifier. It is used in free-running oscillators, ...

(UJT) **Programmable

(PUT) **SITh ( static induction thyristor)

Diodes

Conduct electricity easily in one direction, among more specific behaviors. *

Diode A diode is a two-terminal electronic component that conducts current primarily in one direction (asymmetric conductance); it has low (ideally zero) resistance in one direction, and high (ideally infinite) resistance in the other. A diod ...

rectifier A rectifier is an electrical device that converts alternating current (AC), which periodically reverses direction, to direct current (DC), which flows in only one direction. The reverse operation (converting DC to AC) is performed by an inve ...

, diode bridge * Schottky diode (hot carrier diode) – super fast diode with lower forward voltage drop * Zener diode – allows current to flow "backwards" when a specific set voltage is reached. * Transient voltage suppression diode (TVS), unipolar or bipolar – used to absorb high-voltage spikes * Varicap, tuning diode, varactor, variable capacitance diode – a diode whose AC capacitance varies according to the DC voltage applied. Verschiedene LEDs

Laser diode The laser diode chip removed and placed on the eye of a needle for scale A laser diode (LD, also injection laser diode or ILD, or diode laser) is a semiconductor device similar to a light-emitting diode in which a diode pumped directly with ...

Light-emitting diode A light-emitting diode (LED) is a semiconductor Electronics, device that Light#Light sources, emits light when Electric current, current flows through it. Electrons in the semiconductor recombine with electron holes, releasing energy i ...

(LED) – a diode that emits light * Photodiode – passes current in proportion to incident light ** Avalanche photodiode – photodiode with internal gain ** Solar Cell, photovoltaic cell, PV array or panel – produces power from light * DIAC (diode for alternating current), Trigger Diode, SIDAC) – often used to trigger an SCR *

Constant-current diode A constant-current diode is an electronic device that limits current to a maximal specified value for the device. It is known as a current-limiting diode (CLD) or current-regulating diode (CRD). It consists of an n-channel JFET with the gate sho ...

* Step recovery diode * Tunnel diode - very fast diode based on quantum mechanical tunneling

Integrated circuits

Integrated Circuits can serve a variety of purposes, including acting as a timer, performing digital to analog conversion, performing amplification, or being used for logical operations. *

Integrated circuit An integrated circuit or monolithic integrated circuit (also referred to as an IC, a chip, or a microchip) is a set of electronic circuits on one small flat piece (or "chip") of semiconductor material, usually silicon. Large numbers of tiny ...

(IC) ** MOS integrated circuit (MOS IC) ** Hybrid integrated circuit (hybrid IC) ** Mixed-signal integrated circuit **

Three-dimensional integrated circuit A three-dimensional integrated circuit (3D IC) is a MOS (metal-oxide semiconductor) integrated circuit (IC) manufactured by stacking as many as 16 or more ICs and interconnecting them vertically using, for instance, through-silicon vias (TSVs) or ...

(3D IC) *

Digital electronics Digital electronics is a field of electronics involving the study of digital signals and the engineering of devices that use or produce them. This is in contrast to analog electronics and analog signals. Digital electronic circuits are usu ...

Logic gate A logic gate is an idealized or physical device implementing a Boolean function, a logical operation performed on one or more binary inputs that produces a single binary output. Depending on the context, the term may refer to an ideal logic ga ...

** Microcontroller * Analog circuit ** Hall-effect sensor – senses a magnetic field **

Current sensor In electrical engineering, current sensing is any one of several techniques used to measure electric current. The measurement of current ranges from picoamps to tens of thousands of amperes. The selection of a current sensing method depends on r ...

– senses a current through it

Programmable devices

Programmable logic device A programmable logic device (PLD) is an electronic component used to build reconfigurable digital circuits. Unlike digital logic constructed using discrete logic gates with fixed functions, a PLD has an undefined function at the time of manu ...

** Field-programmable gate array (FPGA) ** Complex programmable logic device (CPLD) *

Field-programmable analog array A field-programmable analog array (FPAA) is an integrated circuit device containing computational analog blocks (CAB) and interconnects between these blocks offering field-programmability. Unlike their digital cousin, the FPGA, the devices tend t ...

(FPAA)

Optoelectronic devices

Opto-electronics Optoelectronics (or optronics) is the study and application of electronic devices and systems that find, detect and control light, usually considered a sub-field of photonics. In this context, ''light'' often includes invisible forms of radiatio ...

** Opto-isolator, opto-coupler, photo-coupler – photodiode, BJT, JFET, SCR, TRIAC, zero-crossing TRIAC, open collector IC, CMOS IC,

solid state relay Solid state contactor PCB mount solid-state DIL relay A solid state relay (SSR) is an electronic switching device that switches on or off when an external voltage (AC or DC) is applied across its control terminals. They serve the same function ...

(SSR) ** Slotted optical switch, opto switch, optical switch ** LED display –

seven-segment display A seven-segment display is a form of electronic display device for displaying decimal numerals that is an alternative to the more complex dot matrix displays. Seven-segment displays are widely used in digital clocks, electronic meters, bas ...

, sixteen-segment display, dot-matrix display

Display technologies

Current: *

Filament lamp An incandescent light bulb, incandescent lamp or incandescent light globe is an electric light with a wire filament heated until it glows. The filament is enclosed in a glass bulb with a vacuum or inert gas to protect the filament from oxida ...

(indicator lamp) *

Vacuum fluorescent display A vacuum fluorescent display (VFD) is a display device once commonly used on consumer electronics equipment such as video cassette recorders, car radios, and microwave ovens. A VFD operates on the principle of cathodoluminescence, roughly ...

(VFD) (preformed characters, 7 segment, starburst) *

Cathode ray tube A cathode-ray tube (CRT) is a vacuum tube containing one or more electron guns, which emit electron beams that are manipulated to display images on a phosphorescent screen. The images may represent electrical waveforms ( oscilloscope), ...

(CRT) (

dot matrix A dot matrix is a 2-dimensional patterned array, used to represent characters, symbols and images. Most types of modern technology use dot matrices for display of information, including mobile phones, televisions, and printers. The system is al ...

scan, radial scan (e.g.

radar Radar is a detection system that uses radio waves to determine the distance (''ranging''), angle, and radial velocity of objects relative to the site. It can be used to detect aircraft, Marine radar, ships, spacecraft, guided missiles, motor v ...

), arbitrary scan (e.g. oscilloscope)) (

monochrome A monochrome or monochromatic image, object or palette is composed of one color (or values of one color). Images using only shades of grey are called grayscale (typically digital) or black-and-white (typically analog). In physics, monochr ...

colour Color (American English) or colour (British English) is the visual perceptual property deriving from the spectrum of light interacting with the photoreceptor cells of the eyes. Color categories and physical specifications of color are associ ...

) * LCD (preformed characters, dot matrix) (passive, TFT) (monochrome, colour) * Neon (individual, 7 segment display) * LED (individual, 7 segment display, starburst display, dot matrix) *

Split-flap display A split-flap display, or sometimes simply a flap display, is a digital electromechanical display device that presents changeable alphanumeric text, and occasionally fixed graphics. Often used as a public transport timetable in airports or ...

(numeric, preprinted messages) *

Plasma display A plasma display panel (PDP) is a type of flat panel display that uses small cells containing plasma: ionized gas that responds to electric fields. Plasma televisions were the first large (over 32 inches diagonal) flat panel displays to be rele ...

(dot matrix) * OLED (similar to an LCD, but each pixel generates its own light, can be made flexible or transparent) *

Micro-LED microLED, also known as micro-LED, mLED or µLED, first invented in 2000 by the research group of Hongxing Jiang and Jingyu Lin of Texas Tech University while they were at Kansas State University, is an emerging flat-panel display technology. m ...

(similar to OLED, but uses inorganic LEDs instead of organic ones, does not suffer from

screen burn-in Screen burn-in, image burn-in, or ghost image, is a permanent discoloration of areas on an electronic display such as a cathode ray tube (CRT) in an old computer monitor or television set. It is caused by cumulative non-uniform use of the s ...

, however it cannot be made flexible or transparent) Obsolete: * Incandescent filament 7 segment display (aka '

Numitron A seven-segment display is a form of electronic display device for displaying decimal numerals that is an alternative to the more complex dot matrix displays. Seven-segment displays are widely used in digital clocks, electronic meters, basic ca ...

') * Nixie tube * Dekatron (aka glow transfer tube) * Magic eye tube indicator * Penetron (a 2 colour see-through CRT)

Vacuum tubes (valves)

A vacuum tube is based on current conduction through a vacuum (see

Vacuum tube A vacuum tube, electron tube, valve (British usage), or tube (North America), is a device that controls electric current flow in a high vacuum between electrodes to which an electric potential difference has been applied. The type known as ...

). *

tube * Amplification ** Triode ** Tetrode ** Pentode ** Hexode ** Pentagrid (Heptode) **

Octode The pentagrid converter is a type of radio receiving valve ( vacuum tube) with five grids used as the frequency mixer stage of a superheterodyne radio receiver. The pentagrid was part of a line of development of valves that were able to take a ...

** Traveling-wave tube ** Klystron * Oscillation ** Magnetron ** Reflex Klystron (obsolete) ** Carcinotron Optical detectors or emitters * Phototube or photodiode – tube equivalent of semiconductor photodiode * Photomultiplier tube – phototube with internal gain *

(CRT) or television picture tube (obsolete) *

(VFD) – modern non-raster sort of small CRT display * Magic eye tube – small CRT display used as a tuning meter (obsolete) * X-ray tube – generates x-rays

Discharge devices

* Gas discharge tube * Ignitron * Thyratron Obsolete: * Mercury arc rectifier * Voltage regulator tube * Nixie tube

Power sources

Sources of electrical power: *

Battery Battery most often refers to: * Electric battery, a device that provides electrical power * Battery (crime), a crime involving unlawful physical contact Battery may also refer to: Energy source *Automotive battery, a device to provide power t ...

– acid- or alkali-based power supply. *

Fuel cell A fuel cell is an electrochemical cell that converts the chemical energy of a fuel (often hydrogen fuel, hydrogen) and an oxidizing agent (often oxygen) into electricity through a pair of redox reactions. Fuel cells are different from most bat ...

– an electrochemical generator *

Power supply A power supply is an electrical device that supplies electric power to an electrical load. The main purpose of a power supply is to convert electric current from a source to the correct voltage, current, and frequency to power the load. As ...

– usually a main hook-up *

Photovoltaic Photovoltaics (PV) is the conversion of light into electricity using semiconducting materials that exhibit the photovoltaic effect, a phenomenon studied in physics, photochemistry, and electrochemistry. The photovoltaic effect is commercially ...

device – generates electricity from light * Thermoelectric generator – generates electricity from temperature gradients *

Electrical generator In electricity generation, a generator is a device that converts motive power ( mechanical energy) or fuel-based power ( chemical energy) into electric power for use in an external circuit. Sources of mechanical energy include steam turbines, ...

– an electromechanical power source * Piezoelectric generator - generates electricity from mechanical strain * Van de Graaff generator - generates electricity from friction

Passive components

Components incapable of controlling current by means of another electrical signal are called ''passive'' devices. Resistors, capacitors, inductors, and transformers are all considered passive devices.

Resistors

Pass current in proportion to voltage (

Ohm's law Ohm's law states that the current through a conductor between two points is directly proportional to the voltage across the two points. Introducing the constant of proportionality, the resistance, one arrives at the usual mathematical equa ...

) and oppose current. *

Resistor A resistor is a passive two-terminal electrical component that implements electrical resistance as a circuit element. In electronic circuits, resistors are used to reduce current flow, adjust signal levels, to divide voltages, bias active e ...

– fixed value ** Power

resistor A resistor is a passive two-terminal electrical component that implements electrical resistance as a circuit element. In electronic circuits, resistors are used to reduce current flow, adjust signal levels, to divide voltages, bias active e ...

– larger to safely dissipate heat generated ** SIP or DIP resistor network – array of resistors in one package * Variable resistor ** Rheostat – two-terminal variable resistor (often for high power) ** Potentiometer – three-terminal variable resistor (variable voltage divider) ** Trim pot – small potentiometer, usually for internal adjustments ** Thermistor – thermally sensitive resistor whose prime function is to exhibit a large, predictable and precise change in electrical resistance when subjected to a corresponding change in body temperature.What is a Thermistor
U.S. Sensor Corp. **

Humistor A humistor is a type of variable resistor whose resistance varies based on humidity. Construction A humistor has a ceramic composition comprising at least one component having a spinel type cubic symmetry selected from the group consisting c ...

– humidity-varied resistor ** Photoresistor ** Memristor ** Varistor, Voltage-dependent resistor, MOV – Passes current when excessive voltage is present * Resistance wire, Nichrome wire – wire of high-resistance material, often used as a heating element * Heater – heating element

Capacitors

Capacitors store and release electrical charge. They are used for filtering power supply lines, tuning resonant circuits, and for blocking DC voltages while passing AC signals, among numerous other uses. *

Capacitor A capacitor is a device that stores electrical energy in an electric field by virtue of accumulating electric charges on two close surfaces insulated from each other. It is a passive electronic component with two terminals. The effect of ...

** Integrated capacitors *** MIS capacitor ***

Trench capacitor A trench is a type of excavation or in the ground that is generally deeper than it is wide (as opposed to a wider gully, or ditch), and narrow compared with its length (as opposed to a simple hole or pit). In geology, trenches result from eros ...

** Fixed capacitors *** Ceramic capacitor *** Film capacitor *** Electrolytic capacitor **** Aluminum electrolytic capacitor **** Tantalum electrolytic capacitor ****

Niobium electrolytic capacitor A niobium electrolytic capacitor (historically also ''Columbium capacitor'') is an electrolytic capacitor whose anode (+) is made of passivated niobium metal or niobium monoxide, on which an insulating niobium pentoxide layer acts as a dielectr ...

(

Columbium capacitor A niobium electrolytic capacitor (historically also ''Columbium capacitor'') is an electrolytic capacitor whose anode (+) is made of passivated niobium metal or niobium monoxide, on which an insulating niobium pentoxide layer acts as a dielectric ...

) ****

Polymer capacitor A polymer capacitor, or more accurately a polymer electrolytic capacitor, is an electrolytic capacitor (e-cap) with a solid conductive polymer electrolyte. There are four different types: * Polymer tantalum electrolytic capacitor (Polymer Ta-e- ...

, OS-CON *** Supercapacitor (Electric double-layer capacitor) ****

Nanoionic supercapacitor Nanoionics is the study and application of phenomena, properties, effects, methods and mechanisms of processes connected with fast ion transport (FIT) in all-solid-state nanoscale systems. The topics of interest include fundamental properties of ...

**** Lithium-ion capacitor *** Mica capacitor ***

Vacuum capacitor A vacuum variable capacitor is a variable capacitor which uses a high vacuum as the dielectric instead of air or other insulating material. This allows for a higher voltage rating than an air dielectric using a smaller total volume. However, many ...

Variable capacitor A variable capacitor is a capacitor whose capacitance may be intentionally and repeatedly changed mechanically or electronically. Variable capacitors are often used in L/C circuits to set the resonance frequency, e.g. to tune a radio (therefo ...

– adjustable capacitance *** Tuning capacitor – variable capacitor for tuning a radio, oscillator, or tuned circuit ***

Trimmer capacitor A trimmer, or preset, is a miniature adjustable electrical component. It is meant to be set correctly when installed in some device, and never seen or adjusted by the device's user. Trimmers can be variable resistors (potentiometers), variable c ...

– small variable capacitor for seldom or rare adjustments of LC-circuits *** Vacuum variable capacitor ** Capacitors for special applications *** Power capacitor *** Safety capacitor *** Filter capacitor *** Light-emitting capacitor (LEC) ***

Motor capacitor A motor capacitor, such as a start capacitor or run capacitor (including a dual run capacitor) is an electrical capacitor that alters the current to one or more windings of a single-phase alternating-current induction motor to create a rotating ...

*** Photoflash capacitor ***

Reservoir capacitor A rectifier is an electrical device that converts alternating current (AC), which periodically reverses direction, to direct current (DC), which flows in only one direction. The reverse operation (converting DC to AC) is performed by an inv ...

/ Bulk capacitor *** Coupling capacitor *** Decoupling capacitor / Buffer capacitor *** Bypass capacitor *** Pull capacitor / Padding capacitor *** Backup capacitor ***

Switched capacitor A switched capacitor (SC) is an electronic circuit that implements a function by moving charges into and out of capacitors when electronic switches are opened and closed. Usually, non-overlapping clock signals are used to control the switches, s ...

***

Feedthrough capacitor A feedthrough is a conductor used to carry a signal through an enclosure or printed circuit board. Like any conductor, it has a small amount of capacitance. A "feedthrough capacitor" has a guaranteed minimum value of built in it and is used ...

** Capacitor network (array) * Varicap diode – AC capacitance varies according to the DC voltage applied

Integrated passive devices

Integrated passive devices are passive devices integrated within one distinct package. They take up less space than equivalent combinations of discrete components.

Magnetic (inductive) devices

Electrical components that use magnetism in the storage and release of electrical charge through current: *

Inductor An inductor, also called a coil, choke, or reactor, is a passive two-terminal electrical component that stores energy in a magnetic field when electric current flows through it. An inductor typically consists of an insulated wire wound into a c ...

, coil, choke * Variable inductor * Saturable inductor *

Transformer A transformer is a passive component that transfers electrical energy from one electrical circuit to another circuit, or multiple circuits. A varying current in any coil of the transformer produces a varying magnetic flux in the transformer' ...

* Magnetic amplifier ( toroid) * ferrite impedances, beads * Motor / Generator *

Solenoid upright=1.20, An illustration of a solenoid upright=1.20, Magnetic field created by a seven-loop solenoid (cross-sectional view) described using field lines A solenoid () is a type of electromagnet formed by a helix, helical coil of wire whose ...

Loudspeaker A loudspeaker (commonly referred to as a speaker or speaker driver) is an electroacoustic transducer that converts an electrical audio signal into a corresponding sound. A ''speaker system'', also often simply referred to as a "speaker" or ...

and

microphone A microphone, colloquially called a mic or mike (), is a transducer that converts sound into an electrical signal. Microphones are used in many applications such as telephones, hearing aids, public address systems for concert halls and publ ...

Memristor

Electrical components that pass charge in proportion to magnetism or magnetic flux, and have the ability to retain a previous resistive state, hence the name of Memory plus Resistor. * Memristor

Networks

Components that use more than one type of passive component: * RC network – forms an

RC circuit A resistor–capacitor circuit (RC circuit), or RC filter or RC network, is an electric circuit composed of resistors and capacitors. It may be driven by a voltage or current source and these will produce different responses. A first order RC ...

, used in snubbers * LC Network – forms an LC circuit, used in tunable transformers and RFI filters.

Transducers, sensors, detectors

# Transducers generate physical effects when driven by an electrical signal, or vice versa. # Sensors (detectors) are transducers that react to environmental conditions by changing their electrical properties or generating an electrical signal. # The transducers listed here are single electronic components (as opposed to complete assemblies), and are passive (see Semiconductors and Tubes for active ones). Only the most common ones are listed here. * Audio **

– Electromagnetic or piezoelectric device to generate full audio **

Buzzer A buzzer or beeper is an audio signaling device, which may be mechanical, electromechanical, or piezoelectric (''piezo'' for short). Typical uses of buzzers and beepers include alarm devices, timers, train and confirmation of user input such ...

– Electromagnetic or piezoelectric sounder to generate tones * Position, motion ** Linear variable differential transformer (LVDT) – Magnetic – detects linear position **

Rotary encoder A rotary encoder, also called a shaft encoder, is an electro-mechanical device that converts the angular position or motion of a shaft or axle to analog or digital output signals. There are two main types of rotary encoder: absolute and increm ...

, Shaft Encoder – Optical, magnetic, resistive or switches – detects absolute or relative angle or rotational speed **

Inclinometer An inclinometer or clinometer is an instrument used for measuring angles of slope, elevation, or depression of an object with respect to gravity's direction. It is also known as a ''tilt indicator'', ''tilt sensor'', ''tilt meter'', ''slope ...

– Capacitive – detects angle with respect to gravity ** Motion sensor, Vibration sensor **

Flow meter Flow measurement is the quantification of bulk fluid movement. Flow can be measured in a variety of ways. The common types of flowmeters with industrial applications are listed below: * a) Obstruction type (differential pressure or variable area) ...

– detects flow in liquid or gas * Force, torque **

Strain gauge A strain gauge (also spelled strain gage) is a device used to measure strain on an object. Invented by Edward E. Simmons and Arthur C. Ruge in 1938, the most common type of strain gauge consists of an insulating flexible backing which supports ...

– Piezoelectric or resistive – detects squeezing, stretching, twisting **

Accelerometer An accelerometer is a tool that measures proper acceleration. Proper acceleration is the acceleration (the rate of change of velocity) of a body in its own instantaneous rest frame; this is different from coordinate acceleration, which is acce ...

– Piezoelectric – detects acceleration, gravity * Thermal ** Thermocouple, thermopile – Wires that generate a voltage proportional to delta temperature ** Thermistor – Resistor whose resistance changes with temperature, up PTC or down NTC ** Resistance Temperature Detector (RTD) – Wire whose resistance changes with temperature ** Bolometer – Device for measuring the power of incident

electromagnetic radiation In physics, electromagnetic radiation (EMR) consists of waves of the electromagnetic (EM) field, which propagate through space and carry momentum and electromagnetic radiant energy. It includes radio waves, microwaves, infrared, (visib ...

** Thermal cutoff – Switch that is opened or closed when a set temperature is exceeded * Magnetic field (see also Hall Effect in semiconductors) **

Magnetometer A magnetometer is a device that measures magnetic field or magnetic dipole moment. Different types of magnetometers measure the direction, strength, or relative change of a magnetic field at a particular location. A compass is one such device, ...

, Gauss meter * Humidity **

Hygrometer A hair tension dial hygrometer with a nonlinear scale. A hygrometer is an instrument used to measure the amount of water vapor in air, in soil, or in confined spaces. Humidity measurement instruments usually rely on measurements of some other q ...

* Electromagnetic, light ** Photo resistor – Light dependent resistor (LDR)

Antennas

Antenna Antenna ( antennas or antennae) may refer to: Science and engineering * Antenna (radio), also known as an aerial, a transducer designed to transmit or receive electromagnetic (e.g., TV or radio) waves * Antennae Galaxies, the name of two collid ...

s transmit or receive radio waves * Elemental dipole * Yagi * Phased array *

Loop antenna A loop antenna is a radio antenna consisting of a loop or coil of wire, tubing, or other electrical conductor, that is usually fed by a balanced source or feeding a balanced load. Within this physical description there are two (possibly three) ...

* Parabolic dish * Log-periodic dipole array * Biconical *

Feedhorn A feed horn (or feedhorn) is a small horn antenna used to couple a waveguide to e.g. a parabolic dish antenna or offset dish antenna for reception or transmission of microwave. A typical application is the use for satellite television rece ...

Assemblies, modules

Multiple electronic components assembled in a device that is in itself used as a component * Oscillator * Display devices ** Liquid crystal display (LCD) ** Digital voltmeters * Filter

Prototyping aids

* Wire-wrap *

Breadboard A breadboard, solderless breadboard, or protoboard is a construction base used to build semi-permanent prototypes of electronic circuits. Unlike a perfboard or stripboard, breadboards do not require soldering or destruction of tracks and are h ...

Electromechanical

Piezoelectric devices, crystals, resonators

Passive components Passivity is a property of engineering systems, most commonly encountered in analog electronics and control systems. Typically, analog designers use ''passivity'' to refer to incrementally passive components and systems, which are incapable of p ...

that use piezoelectric effect: * Components that use the effect to generate or filter high frequencies **

Crystal A crystal or crystalline solid is a solid material whose constituents (such as atoms, molecules, or ions) are arranged in a highly ordered microscopic structure, forming a crystal lattice that extends in all directions. In addition, macro ...

– a ceramic crystal used to generate precise frequencies (See the Modules class below for complete oscillators) **

Ceramic resonator A Ceramic Resonator is an electronic component consisting of a piece of a piezoelectric ceramic material with two or more metal electrodes attached. When connected in an electronic oscillator circuit, resonant mechanical vibrations in the device g ...

– Is a ceramic crystal used to generate semi-precise frequencies ** Ceramic filter – Is a ceramic crystal used to filter a band of frequencies such as in radio receivers ** surface acoustic wave (SAW) filters * Components that use the effect as mechanical transducers. ** Ultrasonic motor – Electric motor that uses the piezoelectric effects ** For piezo buzzers and microphones, see the Transducer class below

Microelectromechanical systems

Microelectromechanical systems Microelectromechanical systems (MEMS), also written as micro-electro-mechanical systems (or microelectronic and microelectromechanical systems) and the related micromechatronics and microsystems constitute the technology of microscopic devices, ...

** Digital micromirror device

Terminals and connectors

Devices to make electrical connection *

Terminal Terminal may refer to: Computing Hardware * Terminal (electronics), a device for joining electrical circuits together * Terminal (telecommunication), a device communicating over a line * Computer terminal, a set of primary input and output devi ...

* Connector **

Socket Socket may refer to: Mechanics * Socket wrench, a type of wrench that uses separate, removable sockets to fit different sizes of nuts and bolts * Socket head screw, a screw (or bolt) with a cylindrical head containing a socket into which the hexag ...

** Screw terminal, Terminal Blocks ** Pin header

Cable assemblies

Electrical cables Electrical wiring is an electrical installation of cabling and associated devices such as switches, distribution boards, sockets, and light fittings in a structure. Wiring is subject to safety standards for design and installation. Allowable ...

with connectors or terminals at their ends * Power cord * Patch cord * Test lead Micro switch

Switches

Components that can pass current ("closed") or break the current ("open"): * Switch – Manually operated switch ** Electrical description: SPST, SPDT, DPST, DPDT, NPNT (general) ** Technology: slide switches, toggle switches, rocker switches, rotary switches, pushbutton switches * Keypad – Array of pushbutton switches * DIP switch – Small array of switches for internal configuration settings * Footswitch – Foot-operated switch * Knife switch – Switch with unenclosed conductors * Micro switch – Mechanically activated switch with snap action * Limit switch – Mechanically activated switch to sense limit of motion * Mercury switch – Switch sensing tilt *

Centrifugal switch A centrifugal switch is an electric switch that operates using the centrifugal force created from a rotating shaft, most commonly that of an electric motor or gasoline engine. The switch is designed to activate or de-activate as a function of t ...

– Switch sensing centrifugal force due to rate of rotation *

Relay A relay Electromechanical relay schematic showing a control coil, four pairs of normally open and one pair of normally closed contacts An automotive-style miniature relay with the dust cover taken off A relay is an electrically operated switch ...

contactor :''In semiconductor testing, contactors can also be referred to as the specialized socket that connects the device under test.'' :''In process industries, a contactor is a vessel where two streams interact, for example, air and liquid. See Gas ...

– Electro-mechanically operated switch (see also

above) * Reed switch – Magnetically activated switch * Thermostat – Thermally activated switch *

Humidistat A humidistat or hygrostat is an electronic device analogous to a thermostat but which responds to relative humidity, not temperature. A typical humidistat is usually included with portable humidifiers or dehumidifiers. It can also be included ...

– Humidity activated switch *

Circuit breaker A circuit breaker is an electrical safety device designed to protect an electrical circuit from damage caused by an overcurrent or short circuit. Its basic function is to interrupt current flow to protect equipment and to prevent the ris ...

– Switch opened in response to excessive current: a resettable fuse * Disconnector – Switch used in high- and medium-voltage applications for maintenance of other devices or isolation of circuits *

Transfer switch A transfer switch is an electrical switch that switches a load between two sources. Some transfer switches are manual, in that an operator effects the transfer by throwing a switch, while others are automatic and trigger when they sense one of t ...

– Switch that toggles a load between two sources

Protection devices

that protect circuits from excessive currents or voltages: *

Fuse Fuse or FUSE may refer to: Devices * Fuse (electrical), a device used in electrical systems to protect against excessive current ** Fuse (automotive), a class of fuses for vehicles * Fuse (hydraulic), a device used in hydraulic systems to protect ...

– over-current protection, one time use *

– resettable fuse in the form of a mechanical switch * Resettable fuse or PolySwitch – circuit breaker action using solid state device *

Ground-fault protection A residual-current device (RCD), residual-current circuit breaker (RCCB) or ground fault circuit interrupter (GFCI) is an electrical safety device that quickly breaks an electrical circuit with leakage current to ground. It is to protect equip ...

or residual-current device – circuit breaker sensitive to mains currents passing to ground * Metal oxide varistor (MOV), surge absorber, TVS – Over-voltage protection *

Inrush current limiter An inrush current limiter is a component used to limit inrush current to avoid gradual damage to components and avoid blowing fuses or tripping circuit breakers. Negative temperature coefficient (NTC) thermistors and fixed resistors are often us ...

– protection against initial Inrush current * Gas discharge tube – protection against high voltage surges *

Spark gap A spark gap consists of an arrangement of two conducting electrodes separated by a gap usually filled with a gas such as air, designed to allow an electric spark to pass between the conductors. When the potential difference between the conductor ...

– electrodes with a gap to arc over at a high voltage *

Lightning arrester A lightning arrester (alternative spelling lightning arrestor) (also called lightning isolator) is a device, essentially an air gap between an electric wire and ground, used on electric power transmission and telecommunication systems to protect ...

– spark gap used to protect against lightning strikes *

Recloser In electric power distribution, automatic circuit reclosers (ACRs) are a class of switchgear designed for use on overhead electricity distribution networks to detect and interrupt transient faults. Also known as reclosers or autoreclosers, ACRs a ...

– automatic switch that opens on an overcurrent (fault) condition, then closes to check if the fault is cleared, and repeats this process a specified number of times before maintaining the open position until it is manually closed * Arc-fault circuit interrupter – circuit breaker that protects against arcs * Network protector – protective device that disconnects a distribution transformer when energy flow reverses direction * Magnetic starter – electromechanical switch used in motors

Mechanical accessories

Enclosure (electrical) An electrical enclosure is a cabinet for electrical or electronic equipment to mount switches, knobs and displays and to prevent electrical shock to equipment users and protect the contents from the environment. The enclosure is the only ...

Heat sink A heat sink (also commonly spelled heatsink) is a passive heat exchanger that transfers the heat generated by an electronic or a mechanical device to a fluid medium, often air or a liquid coolant, where it is dissipated away from the device, ...

* Fan

Other

Printed circuit board A printed circuit board (PCB; also printed wiring board or PWB) is a medium used in electrical and electronic engineering to connect electronic components to one another in a controlled manner. It takes the form of a laminated sandwich str ...

s *

Lamp Lamp, Lamps or LAMP may refer to: Lighting * Oil lamp, using an oil-based fuel source * Kerosene lamp, using kerosene as a fuel * Electric lamp, or light bulb, a replaceable component that produces light from electricity * Light fixture, or ligh ...

* Waveguide

Obsolete

* Carbon amplifier (see Carbon microphones used as amplifiers) * Carbon arc (negative resistance device) * Dynamo (historic rf generator) *

Coherer The coherer was a primitive form of radio signal detector used in the first radio receivers during the wireless telegraphy era at the beginning of the 20th century. Its use in radio was based on the 1890 findings of French physicist Édouard Bran ...

Standard symbols

On a circuit diagram, electronic devices are represented by conventional symbols.

Reference designator A reference designator unambiguously identifies the location of an component within an electrical schematic or on a printed circuit board. The reference designator usually consists of one or two letters followed by a number, e.g. R13, C1002. The nu ...

s are applied to the symbols to identify the components.

References

{{DEFAULTSORT:Electronic Component

Components Circuit Component may refer to: •Are devices that perform functions when they are connected in a circuit. In engineering, science, and technology Generic systems *System components, an entity with discrete structure, such as an assemb ...