cell walls

A cell wall is a structural layer surrounding some types of cells, just outside the

cell membrane

. It can be tough, flexible, and sometimes rigid. It provides the cell with both structural support and protection, and also acts as a filtering mechanism. Cell walls are absent in animals but are present in most other eukaryotes including

algae

,

fungi

and

plants

and in most prokaryotes (except mollicute bacteria). A major function is to act as pressure vessels, preventing over-expansion of the cell when water enters.

The composition of cell walls varies between taxonomic group and species and may depend on cell type and developmental stage. The primary cell wall of

land plants

is composed of the polysaccharides

cellulose

,

hemicellulose

s and

pectin

. Often, other polymers such as

lignin

,

suberin

or cutin are anchored to or embedded in plant cell walls. Algae possess cell walls made of glycoproteins and polysaccharides such as carrageenan and agar that are absent from land plants. In bacteria, the cell wall is composed of

peptidoglycan

. The cell walls of

archaea

have various compositions, and may be formed of glycoprotein S-layers, pseudopeptidoglycan, or polysaccharides. Fungi possess cell walls made of the

N-acetylglucosamine

polymer

chitin

. Unusually,

diatom

s have a cell wall composed of biogenic silica.

History

A plant cell wall was first observed and named (simply as a "wall") by Robert Hooke in 1665. However, "the dead excrusion product of the living protoplast" was forgotten, for almost three centuries, being the subject of scientific interest mainly as a resource for industrial processing or in relation to animal or human health.

In 1804,

Karl Rudolphi

and J.H.F. Link proved that cells had independent cell walls. Before, it had been thought that cells shared walls and that fluid passed between them this way.

The mode of formation of the cell wall was controversial in the 19th century.

Hugo von Mohl

(1853, 1858) advocated the idea that the cell wall grows by apposition. Carl Nägeli (1858, 1862, 1863) believed that the growth of the wall in thickness and in area was due to a process termed intussusception. Each theory was improved in the following decades: the apposition (or lamination) theory by Eduard Strasburger (1882, 1889), and the intussusception theory by

Julius Wiesner

(1886).

In 1930, Ernst Münch coined the term ''apoplast'' in order to separate the "living" symplast from the "dead" plant region, the latter of which included the cell wall.

By the 1980s, some authors suggested replacing the term "cell wall", particularly as it was used for plants, with the more precise term "extracellular matrix", as used for animal cells, but others preferred the older term.

Properties

Cell walls serve similar purposes in those organisms that possess them. They may give cells rigidity and strength, offering protection against mechanical stress. The chemical composition and mechanical properties of the cell wall are linked with plant cell growth and morphogenesis. In multicellular organisms, they permit the organism to build and hold a definite shape. Cell walls also limit the entry of large molecules that may be toxic to the cell. They further permit the creation of stable osmotic environments by preventing osmotic lysis and helping to retain water. Their composition, properties, and form may change during the

cell cycle

and depend on growth conditions.

Rigidity of cell walls

In most cells, the cell wall is flexible, meaning that it will bend rather than holding a fixed shape, but has considerable tensile strength. The apparent rigidity of primary plant tissues is enabled by cell walls, but is not due to the walls' stiffness. Hydraulic turgor pressure creates this rigidity, along with the wall structure. The flexibility of the cell walls is seen when plants wilt, so that the stems and leaves begin to droop, or in

seaweed

s that bend in water currents. As John Howland explains

The apparent rigidity of the cell wall thus results from inflation of the cell contained within. This inflation is a result of the

passive uptake of water

.

In plants, a secondary cell wall is a thicker additional layer of cellulose which increases wall rigidity. Additional layers may be formed by

lignin

in

xylem

cell walls, or

suberin

in cork cell walls. These compounds are rigid and

waterproof

, making the secondary wall stiff. Both

wood

and bark cells of

tree

s have secondary walls. Other parts of plants such as the leaf stalk may acquire similar reinforcement to resist the strain of physical forces.

Permeability

The primary cell wall of most

plant cell

s is freely permeable to small molecules including small proteins, with size exclusion estimated to be 30-60 kDa. The pH is an important factor governing the transport of molecules through cell walls.

Evolution

Cell walls evolved independently in many groups.

The

photosynthetic

eukaryote

s (so-called plant and algae) is one group with cellulose cell walls, where the cell wall is closely related to the evolution of multicellularity, terrestrialization and vascularization. The CesA cellulose synthase evolved in ''

Cyanobacteria

'' and was part of Archaeplastida since endosymbiosis; secondary endosymbiosis events transferred it (with the

arabinogalactan

proteins) further into brown algae and oomycetes. Plants later evolved various genes from CesA, including the Csl (cellulose synthase-like) family of proteins and additional Ces proteins. Combined with the various glycosyltransferases (GT), they enable more complex chemical structures to be built.

Fungi use a chitin-glucan-protein cell wall. They share the 1,3-β-glucan synthesis pathway with plants, using homologous GT48 family 1,3-Beta-glucan synthases to perform the task, suggesting that such an enzyme is very ancient within the eukaryotes. Their glycoproteins are rich in

mannose

. The cell wall might have evolved to deter viral infections. Proteins embedded in cell walls are variable, contained in tandem repeats subject to homologous recombination. An alternative scenario is that fungi started with a

chitin

-based cell wall and later acquired the GT-48 enzymes for the 1,3-β-glucans via horizontal gene transfer. The pathway leading to 1,6-β-glucan synthesis is not sufficiently known in either case.

Plant cell walls

The walls of plant cells must have sufficient tensile strength to withstand internal

osmotic pressure

s of several times atmospheric pressure that result from the difference in solute concentration between the cell interior and external solutions. Plant cell walls vary from 0.1 to several µm in thickness.

Layers

Up to three strata or layers may be found in plant cell walls:

*The primary cell wall, generally a thin, flexible and extensible layer formed while the cell is growing.
*The secondary cell wall, a thick layer formed inside the primary cell wall after the cell is fully grown. It is not found in all cell types. Some cells, such as the conducting cells in

xylem

, possess a secondary wall containing

lignin

, which strengthens and waterproofs the wall.
*The middle lamella, a layer rich in

pectin

s. This outermost layer forms the interface between adjacent plant cells and glues them together.

Composition

In the primary (growing) plant cell wall, the major carbohydrates are

cellulose

,

hemicellulose

and

pectin

. The cellulose

microfibril

s are linked via hemicellulosic tethers to form the cellulose-hemicellulose network, which is embedded in the pectin matrix. The most common hemicellulose in the primary cell wall is xyloglucan. In grass cell walls, xyloglucan and pectin are reduced in abundance and partially replaced by glucuronarabinoxylan, another type of hemicellulose. Primary cell walls characteristically extend (grow) by a mechanism called acid growth, mediated by expansins, extracellular proteins activated by acidic conditions that modify the hydrogen bonds between

pectin

and cellulose. This functions to increase cell wall extensibility. The outer part of the primary cell wall of the plant epidermis is usually impregnated with cutin and wax, forming a permeability barrier known as the plant cuticle.

Secondary cell walls contain a wide range of additional compounds that modify their mechanical properties and permeability. The major

polymer

s that make up

wood

(largely secondary cell walls) include:
* cellulose, 35-50%
*

xylan

, 20-35%, a type of hemicellulose
*

lignin

, 10-25%, a complex phenolic polymer that penetrates the spaces in the cell wall between cellulose, hemicellulose and pectin components, driving out water and strengthening the wall.

Additionally, structural

protein

s (1-5%) are found in most plant cell walls; they are classified as hydroxyproline-rich glycoproteins (HRGP),

arabinogalactan

proteins (AGP), glycine-rich proteins (GRPs), and proline-rich proteins (PRPs). Each class of glycoprotein is defined by a characteristic, highly repetitive protein sequence. Most are

glycosylated

, contain

hydroxyproline

(Hyp) and become cross-linked in the cell wall. These proteins are often concentrated in specialized cells and in cell corners. Cell walls of the epidermis may contain cutin. The Casparian strip in the endodermis roots and cork cells of plant bark contain

suberin

. Both cutin and suberin are polyesters that function as permeability barriers to the movement of water. The relative composition of carbohydrates, secondary compounds and proteins varies between plants and between the cell type and age. Plant cells walls also contain numerous enzymes, such as hydrolases, esterases, peroxidases, and transglycosylases, that cut, trim and cross-link wall polymers.

Secondary walls - especially in grasses - may also contain microscopic

silica

crystals, which may strengthen the wall and protect it from herbivores.

Cell walls in some plant tissues also function as storage deposits for carbohydrates that can be broken down and resorbed to supply the metabolic and growth needs of the plant. For example, endosperm cell walls in the seeds of cereal grasses,

nasturtium

and other species, are rich in glucans and other polysaccharides that are readily digested by enzymes during seed germination to form simple sugars that nourish the growing embryo.

Formation

The middle lamella is laid down first, formed from the cell plate during

cytokinesis

, and the primary cell wall is then deposited inside the middle lamella. The actual structure of the cell wall is not clearly defined and several models exist - the covalently linked cross model, the tether model, the diffuse layer model and the stratified layer model. However, the primary cell wall, can be defined as composed of

cellulose

microfibrils aligned at all angles. Cellulose microfibrils are produced at the plasma membrane by the cellulose synthase complex, which is proposed to be made of a hexameric rosette that contains three cellulose synthase catalytic subunits for each of the six units. Microfibrils are held together by hydrogen bonds to provide a high tensile strength. The cells are held together and share the gelatinous membrane called the ''middle lamella'', which contains

magnesium

and

calcium

pectates (salts of

pectic acid

). Cells interact though plasmodesmata, which are inter-connecting channels of cytoplasm that connect to the protoplasts of adjacent cells across the cell wall.

In some plants and cell types, after a maximum size or point in development has been reached, a ''secondary wall'' is constructed between the plasma membrane and primary wall. Unlike the primary wall, the cellulose microfibrils are aligned parallel in layers, the orientation changing slightly with each additional layer so that the structure becomes helicoidal. Cells with secondary cell walls can be rigid, as in the gritty sclereid cells in pear and quince fruit. Cell to cell communication is possible through pit (botany), pits in the secondary cell wall that allow plasmodesmata to connect cells through the secondary cell walls.

Fungal cell walls

There are several groups of organisms that have been called "fungi". Some of these groups (Oomycete and Myxogastria) have been transferred out of the Kingdom Fungi, in part because of fundamental biochemical differences in the composition of the cell wall. Most true fungi have a cell wall consisting largely of

chitin

and other polysaccharides. True fungi do not have

cellulose

in their cell walls.

True fungi

In fungi, the cell wall is the outer-most layer, external to the plasma membrane. The fungal cell wall is a matrix of three main components:
*

chitin

:

polymer

s consisting mainly of unbranched chains of β-(1,4)-linked-N-Acetylglucosamine in the Ascomycota and Basidiomycota, or poly-β-(1,4)-linked-N-Acetylglucosamine (chitosan) in the Zygomycota. Both

chitin

and chitosan are synthesized and extruded at the plasma membrane.
* glucans: glucose

polymer

s that function to cross-link

chitin

or chitosan polymers. β-glucans are glucose molecules linked via β-(1,3)- or β-(1,6)- bonds and provide rigidity to the cell wall while α-glucans are defined by α-(1,3)- and/or α-(1,4) bonds and function as part of the matrix.
*

protein

s: enzymes necessary for cell wall synthesis and lysis in addition to structural proteins are all present in the cell wall. Most of the structural proteins found in the cell wall are Glycosylation, glycosylated and contain

mannose

, thus these proteins are called mannoproteins or Mannan (polysaccharide), mannans.

Other eukaryotic cell walls

Algae

Like plants, algae have cell walls. Algal cell walls contain either polysaccharides (such as cellulose (a glucan)) or a variety of glycoproteins (Volvocales) or both. The inclusion of additional polysaccharides in algal cells walls is used as a feature for algal taxonomy (biology), taxonomy.

* Mannan (polysaccharide), Mannans: They form microfibrils in the cell walls of a number of Marine (ocean), marine green algae including those from the genera, ''Codium'', ''Dasycladus'', and ''Acetabularia'' as well as in the walls of some red algae, like ''Porphyra'' and ''Bangia''.
* Xylans:
* Alginic acid: It is a common polysaccharide in the cell walls of brown algae.
* Sulfonated polysaccharides: They occur in the cell walls of most algae; those common in red algae include agarose, carrageenan, porphyran, furcelleran and funoran.

Other compounds that may accumulate in algal cell walls include sporopollenin and calcium, calcium ions.

The group of

algae

known as the

diatom

s Biosynthesis, synthesize their cell walls (also known as frustules or valves) from silicon dioxide, silicic acid. Significantly, relative to the organic cell walls produced by other groups, silica frustules require less energy to synthesize (approximately 8%), potentially a major saving on the overall cell energy budget and possibly an explanation for higher growth rates in diatoms.

In brown algae, phlorotannins may be a constituent of the cell walls.

Water molds

The group Oomycetes, also known as water molds, are saprotrophic Plant pathology, plant pathogens like fungi. Until recently they were widely believed to be fungi, but organelle, structural and molecular biology, molecular evidence has led to their reclassification as heterokonts, related to autotrophic brown algae and

diatom

s. Unlike fungi, oomycetes typically possess cell walls of cellulose and glucans rather than chitin, although some genera (such as ''Achlya'' and ''Saprolegnia'') do have chitin in their walls. The fraction of cellulose in the walls is no more than 4 to 20%, far less than the fraction of glucans. Oomycete cell walls also contain the amino acid

hydroxyproline

, which is not found in fungal cell walls.

Slime molds

The dictyostelids are another group formerly classified among the fungi. They are slime molds that feed as unicellular amoebae, but aggregate into a reproductive stalk and sporangium under certain conditions. Cells of the reproductive stalk, as well as the spores formed at the apex, possess a

cellulose

wall. The spore wall has three layers, the middle one composed primarily of cellulose, while the innermost is sensitive to cellulase and pronase.

Prokaryotic cell walls

Bacterial cell walls

Around the outside of the cell membrane is the Bacterial cell structure#Cell wall, bacterial cell wall. Bacterial cell walls are made of

peptidoglycan

(also called murein), which is made from polysaccharide chains cross-linked by unusual peptides containing D-amino acids. Bacterial cell walls are different from the cell walls of plants and fungi which are made of

cellulose

and

chitin

, respectively. The cell wall of bacteria is also distinct from that of Archaea, which do not contain peptidoglycan. The cell wall is essential to the survival of many bacteria, although L-form bacteria can be produced in the laboratory that lack a cell wall. The antibiotic penicillin is able to kill bacteria by preventing the cross-linking of peptidoglycan and this causes the cell wall to weaken and lyse. The lysozyme enzyme can also damage bacterial cell walls.

There are broadly speaking two different types of cell wall in bacteria, called gram-positive and gram-negative. The names originate from the reaction of cells to the Gram stain, a test long-employed for the classification of bacterial species.

Gram-positive bacteria possess a thick cell wall containing many layers of peptidoglycan and teichoic acids. In contrast, gram-negative bacteria have a relatively thin cell wall consisting of a few layers of peptidoglycan surrounded by a second lipid membrane containing lipopolysaccharides and lipoproteins. Most bacteria have the gram-negative cell wall and only the Firmicutes and Actinobacteria (previously known as the low G+C and high G+C gram-positive bacteria, respectively) have the alternative gram-positive arrangement. These differences in structure can produce differences in antibiotic susceptibility, for instance vancomycin can kill only gram-positive bacteria and is ineffective against gram-negative pathogens, such as ''Haemophilus influenzae'' or ''Pseudomonas aeruginosa''.

Archaeal cell walls

Although not truly unique, the cell walls of Archaea are unusual. Whereas

peptidoglycan

is a standard component of all bacterial cell walls, all archaeal cell walls lack

peptidoglycan

, though some methanogens have a cell wall made of a similar polymer called pseudopeptidoglycan. There are four types of cell wall currently known among the Archaea.

One type of archaeal cell wall is that composed of pseudopeptidoglycan (also called pseudomurein). This type of wall is found in some methanogens, such as ''Methanobacterium'' and ''Methanothermus''. While the overall structure of archaeal ''pseudo''peptidoglycan superficially resembles that of bacterial peptidoglycan, there are a number of significant chemical differences. Like the peptidoglycan found in bacterial cell walls, pseudopeptidoglycan consists of

polymer

chains of glycan cross-linked by short peptide connections. However, unlike peptidoglycan, the sugar N-Acetylmuramic acid, N-acetylmuramic acid is replaced by N-Acetyltalosaminuronic acid, N-acetyltalosaminuronic acid, and the two sugars are bonded with a ''β'',1-3 glycosidic linkage instead of ''β'',1-4. Additionally, the cross-linking peptides are L-amino acids rather than D-amino acids as they are in bacteria.

A second type of archaeal cell wall is found in ''Methanosarcina'' and ''Halococcus''. This type of cell wall is composed entirely of a thick layer of polysaccharides, which may be sulfated in the case of ''Halococcus''. Structure in this type of wall is complex and not fully investigated.

A third type of wall among the Archaea consists of glycoprotein, and occurs in the hyperthermophiles, ''Halobacterium'', and some methanogens. In ''Halobacterium'', the

protein

s in the wall have a high content of acidic amino acids, giving the wall an overall negative charge. The result is an unstable structure that is stabilized by the presence of large quantities of positive sodium ions that Neutralization (chemistry), neutralize the charge. Consequently, ''Halobacterium'' thrives only under conditions with high salinity.

In other Archaea, such as ''Methanomicrobium'' and ''Desulfurococcus'', the wall may be composed only of surface-layer

protein

s, known as an ''S-layer''. S-layers are common in bacteria, where they serve as either the sole cell-wall component or an outer layer in conjunction with polysaccharides. Most Archaea are Gram-negative, though at least one Gram-positive member is known.

Other cell coverings

Many protists and bacteria produce other cell surface structures apart from cell walls, external (extracellular matrix) or internal. Many

algae

have a sheath or envelope of mucilage outside the cell made of exopolysaccharides. Diatoms build a frustule from

silica

extracted from the surrounding water; radiolarians, foraminiferans, testate amoebae and silicoflagellates also produce a skeleton from minerals, called test (biology), test in some groups. Many green algae, such as ''Halimeda'' and the Dasycladales, and some red algae, the Corallinales, encase their cells in a secreted skeleton of calcium carbonate. In each case, the wall is rigid and essentially inorganic. It is the non-living component of cell. Some golden algae, ciliates and choanoflagellates produces a shell-like protective outer covering called lorica (biology), lorica. Some dinoflagellates have a theca of

cellulose

plates, and coccolithophorids have coccoliths.

An extracellular matrix (ECM) is also present in metazoans. Its Chemical composition, composition varies between cells, but collagens are the most abundance (chemistry), abundant protein in the ECM.

See also

* Extracellular matrix
* Bacterial cell structure
* Plant cell

References

External links

Cell wall ultrastructure

{{DEFAULTSORT:Cell Wall
Plant physiology
Organelles