XTX is a
computer-on-module
A computer-on-module (COM) is a type of single-board computer (SBC), a subtype of an embedded computer system. An extension of the concept of system on chip (SoC) and system in package (SiP), COM lies between a full-up computer and a microco ...
(COM) standard for
x86-based
embedded devices
An embedded system is a computer system—a combination of a computer processor, computer memory, and input/output peripheral devices—that has a dedicated function within a larger mechanical or electronic system. It is ''embedded'' as ...
. XTX adds
PCI-Express
PCI Express (Peripheral Component Interconnect Express), officially abbreviated as PCIe or PCI-e, is a high-speed serial computer expansion bus standard, designed to replace the older PCI, PCI-X and AGP bus standards. It is the common mot ...
,
SATA
SATA (Serial AT Attachment) is a computer bus interface that connects host adapter, host bus adapters to mass storage devices such as hard disk drives, optical drives, and solid-state drives. Serial ATA succeeded the earlier Parallel ATA (PATA) ...
, and
LPC capabilities. The standard was promulgated by Advantech Corporation, Ampro,
and
Congatec.
References
External links
*
"Next-gen computer module standard gains momentum" on LinuxDevices.com
{{hardware-stub
Motherboard form factors
Computer standards