Wick's theorem
   HOME

TheInfoList



OR:

Wick's theorem is a method of reducing high- order
derivative In mathematics, the derivative is a fundamental tool that quantifies the sensitivity to change of a function's output with respect to its input. The derivative of a function of a single variable at a chosen input value, when it exists, is t ...
s to a
combinatorics Combinatorics is an area of mathematics primarily concerned with counting, both as a means and as an end to obtaining results, and certain properties of finite structures. It is closely related to many other areas of mathematics and has many ...
problem. It is named after Italian physicist Gian Carlo Wick. It is used extensively in
quantum field theory In theoretical physics, quantum field theory (QFT) is a theoretical framework that combines Field theory (physics), field theory and the principle of relativity with ideas behind quantum mechanics. QFT is used in particle physics to construct phy ...
to reduce arbitrary products of
creation and annihilation operators Creation operators and annihilation operators are Operator (mathematics), mathematical operators that have widespread applications in quantum mechanics, notably in the study of quantum harmonic oscillators and many-particle systems. An annihilatio ...
to sums of products of pairs of these operators. This allows for the use of Green's function methods, and consequently the use of Feynman diagrams in the field under study. A more general idea in
probability theory Probability theory or probability calculus is the branch of mathematics concerned with probability. Although there are several different probability interpretations, probability theory treats the concept in a rigorous mathematical manner by expre ...
is Isserlis' theorem. In perturbative quantum field theory, Wick's theorem is used to quickly rewrite each time ordered summand in the Dyson series as a sum of normal ordered terms. In the limit of asymptotically free ingoing and outgoing states, these terms correspond to Feynman diagrams.


Definition of contraction

For two operators \hat and \hat we define their contraction to be :\hat^\bullet\, \hat^\bullet \equiv \hat\,\hat\, - \mathopen \hat\,\hat \mathclose where \mathopen \hat \mathclose denotes the normal order of an operator \hat. Alternatively, contractions can be denoted by a line joining \hat and \hat, like \overset. We shall look in detail at four special cases where \hat and \hat are equal to creation and annihilation operators. For N bosonic or fermionic modes we'll denote the creation operators by \hat_i^\dagger and the annihilation operators by \hat_i (i=1,2,3,\ldots,N). They satisfy the commutation relations for bosonic operators hat_i,\hat_j^\dagger\delta_ \hat, or the anti-commutation relations for fermionic operators \=\delta_ \hat where \delta_ denotes the
Kronecker delta In mathematics, the Kronecker delta (named after Leopold Kronecker) is a function of two variables, usually just non-negative integers. The function is 1 if the variables are equal, and 0 otherwise: \delta_ = \begin 0 &\text i \neq j, \\ 1 &\ ...
and \hat denotes the identity operator. We then have :\hat_i^\bullet \,\hat_j^\bullet = \hat_i \,\hat_j \,- \mathopen\,\hat_i\, \hat_j\,\mathclose\, = 0 :\hat_i^\, \hat_j^ = \hat_i^\dagger\, \hat_j^\dagger \,-\,\mathopen\hat_i^\dagger\,\hat_j^\dagger\,\mathclose\, = 0 :\hat_i^\, \hat_j^\bullet = \hat_i^\dagger\, \hat_j \,- \mathopen\,\hat_i^\dagger \,\hat_j\, \mathclose\,= 0 :\hat_i^\bullet \,\hat_j^= \hat_i\, \hat_j^\dagger \,- \mathopen\,\hat_i\,\hat_j^\dagger \,\mathclose\, = \delta_ \hat where i,j = 1,\ldots,N. These relationships hold true for bosonic operators or fermionic operators because of the way normal ordering is defined.


Examples

We can use contractions and normal ordering to express any product of creation and annihilation operators as a sum of normal ordered terms. This is the basis of Wick's theorem. Before stating the theorem fully we shall look at some examples. Suppose \hat_i and \hat_i^\dagger are bosonic operators satisfying the commutation relations: :\left hat_i^\dagger, \hat_j^\dagger \right= 0 :\left hat_i, \hat_j \right= 0 :\left hat_i, \hat_j^\dagger \right = \delta_ \hat where i,j = 1,\ldots,N, \left \hat, \hat \right\equiv \hat \hat - \hat \hat denotes the
commutator In mathematics, the commutator gives an indication of the extent to which a certain binary operation fails to be commutative. There are different definitions used in group theory and ring theory. Group theory The commutator of two elements, ...
, and \delta_ is the Kronecker delta. We can use these relations, and the above definition of contraction, to express products of \hat_i and \hat_i^\dagger in other ways.


Example 1

:\hat_i \,\hat_j^\dagger = \hat_j^\dagger \,\hat_i + \delta_ = \hat_j^\dagger \,\hat_i + \hat_i^\bullet \,\hat_j^ =\,\mathopen\,\hat_i\, \hat_j^\dagger \,\mathclose + \hat_i^\bullet \,\hat_j^ Note that we have not changed \hat_i \,\hat_j^\dagger but merely re-expressed it in another form as \,\mathopen\,\hat_i\, \hat_j^\dagger \,\mathclose + \hat_i^\bullet \,\hat_j^


Example 2

:\hat_i \,\hat_j^\dagger \, \hat_k= (\hat_j^\dagger \,\hat_i + \delta_)\hat_k = \hat_j^\dagger \,\hat_i\, \hat_k + \delta_\hat_k = \hat_j^\dagger \,\hat_i\,\hat_k + \hat_i^\bullet \,\hat_j^ \hat_k =\,\mathopen\,\hat_i\, \hat_j^\dagger \hat_k \,\mathclose + \mathclose \,\hat_i^\bullet \,\hat_j^ \,\hat_k \mathclose


Example 3

:\hat_i \,\hat_j^\dagger \, \hat_k \,\hat_l^\dagger= (\hat_j^\dagger \,\hat_i + \delta_)(\hat_l^\dagger\,\hat_k + \delta_) ::::: = \hat_j^\dagger \,\hat_i\, \hat_l^\dagger\, \hat_k + \delta_\hat_j^\dagger \,\hat_i + \delta_\hat_l^\dagger\hat_k + \delta_ \delta_ ::::: = \hat_j^\dagger (\hat_l^\dagger\, \hat_i + \delta_) \hat_k + \delta_\hat_j^\dagger \,\hat_i + \delta_\hat_l^\dagger\hat_k + \delta_ \delta_ :::::= \hat_j^\dagger \hat_l^\dagger\, \hat_i \hat_k + \delta_ \hat_j^\dagger \, \hat_k + \delta_\hat_j^\dagger \,\hat_i + \delta_\hat_l^\dagger\hat_k + \delta_ \delta_ :::::= \,\mathopen\hat_i \,\hat_j^\dagger \, \hat_k \,\hat_l^\dagger\,\mathclose + \mathopen\,\hat_i^\bullet \,\hat_j^\dagger \, \hat_k \,\hat_l^\,\mathclose+\mathopen\,\hat_i \,\hat_j^\dagger \, \hat_k^\bullet \,\hat_l^\,\mathclose+\mathopen\,\hat_i^\bullet \,\hat_j^ \, \hat_k \,\hat_l^\dagger\,\mathclose+ \,\mathopen\hat_i^\bullet \,\hat_j^ \, \hat_k^\,\hat_l^ \mathclose In the last line we have used different numbers of ^\bullet symbols to denote different contractions. By repeatedly applying the commutation relations it takes a lot of work to express \hat_i \,\hat_j^\dagger \, \hat_k \,\hat_l^\dagger in the form of a sum of normally ordered products. It is an even lengthier calculation for more complicated products. Luckily Wick's theorem provides a shortcut.


Statement of the theorem

A product of creation and annihilation operators \hat \hat \hat \hat \hat \hat\ldots can be expressed as : \begin \hat \hat \hat \hat \hat \hat\ldots &= \mathopen \hat \hat \hat \hat \hat \hat\ldots \mathclose \\ &\quad + \sum_\text \mathopen \hat^\bullet \hat^\bullet \hat \hat \hat \hat \ldots \mathclose \\ &\quad + \sum_\text \mathopen \hat^\bullet \hat^ \hat^ \hat^\bullet \hat \hat \ldots \mathclose \\ &\quad + \ldots \end In other words, a string of creation and annihilation operators can be rewritten as the normal-ordered product of the string, plus the normal-ordered product after all single contractions among operator pairs, plus all double contractions, etc., plus all full contractions. Applying the theorem to the above examples provides a much quicker method to arrive at the final expressions. A warning: In terms on the right hand side containing multiple contractions care must be taken when the operators are fermionic. In this case an appropriate minus sign must be introduced according to the following rule: rearrange the operators (introducing minus signs whenever the order of two fermionic operators is swapped) to ensure the contracted terms are adjacent in the string. The contraction can then be applied (See "Rule C" in Wick's paper). Example: If we have two fermions (N=2) with creation and annihilation operators \hat_i^\dagger and \hat_i (i=1,2) then : \begin \hat_1 \,\hat_2 \, \hat_1^\dagger \,\hat_2^\dagger \,= & \,\mathopen \hat_1 \,\hat_2 \, \hat_1^\dagger \,\hat_2^\dagger \, \mathclose \\ pt& - \,\hat_1^\bullet \, \hat_1^ \, \,\mathopen \hat_2 \, \hat_2^\dagger \, \mathclose + \,\hat_1^\bullet \, \hat_2^ \, \,\mathopen \hat_2 \, \hat_1^\dagger \, \mathclose +\, \hat_2^\bullet \, \hat_1^ \, \,\mathopen \hat_1 \,\hat_2^\dagger \, \mathclose - \hat_2^\bullet \,\hat_2^ \, \,\mathopen \hat_1 \, \hat_1^\dagger \, \mathclose \\ pt& -\hat_1^ \, \hat_1^ \, \hat_2^\bullet \, \hat_2^ \, + \hat_1^ \,\hat_2^\, \hat_2^\bullet \, \hat_1^ \, \end Note that the term with contractions of the two creation operators and of the two annihilation operators is not included because their contractions vanish.


Proof

We use induction to prove the theorem for bosonic creation and annihilation operators. The N=2 base case is trivial, because there is only one possible contraction: :\hat\hat = \mathopen\hat\hat\mathclose + (\hat\,\hat\, - \mathopen \hat\,\hat \mathclose) = \mathopen\hat\hat\mathclose + \hat^\bullet\hat^\bullet In general, the only non-zero contractions are between an annihilation operator on the left and a creation operator on the right. Suppose that Wick's theorem is true for N-1 operators \hat \hat \hat \hat \hat\ldots, and consider the effect of adding an ''N''th operator \hat to the left of \hat \hat \hat \hat \hat\ldots to form \hat\hat\hat\hat\hat \hat\ldots. By Wick's theorem applied to N-1 operators, we have: : \begin \hat \hat \hat \hat \hat \hat\ldots &= \hat \mathopen\hat \hat \hat \hat \hat\ldots \mathclose \\ &\quad + \hat \sum_\text \mathopen \hat^\bullet \hat^\bullet \hat \hat \hat \ldots \mathclose \\ &\quad + \hat \sum_\text \mathopen \hat^\bullet \hat^ \hat^ \hat^\bullet \hat \ldots \mathclose \\ &\quad + \hat \ldots \end \hat is either a creation operator or an annihilation operator. If \hat is a creation operator, all above products, such as \hat\mathopen\hat \hat \hat \hat \hat\ldots \mathclose, are already normal ordered and require no further manipulation. Because \hat is to the left of all annihilation operators in \hat\hat\hat\hat\hat\hat\ldots, any contraction involving it will be zero. Thus, we can add all contractions involving \hat to the sums without changing their value. Therefore, if \hat is a creation operator, Wick's theorem holds for \hat\hat\hat\hat\hat\hat\ldots. Now, suppose that \hat is an annihilation operator. To move \hat from the left-hand side to the right-hand side of all the products, we repeatedly swap \hat with the operator immediately right of it (call it \hat), each time applying \hat\hat = \mathopen\hat\hat\mathclose + \hat^\bullet\hat^\bullet to account for noncommutativity. Once we do this, all terms will be normal ordered. All terms added to the sums by pushing \hat through the products correspond to additional contractions involving \hat. Therefore, if \hat is an annihilation operator, Wick's theorem holds for \hat\hat\hat\hat\hat\hat\ldots. We have proved the base case and the induction step, so the theorem is true. By introducing the appropriate minus signs, the proof can be extended to fermionic creation and annihilation operators. The theorem applied to fields is proved in essentially the same way.


Wick's theorem applied to fields

The correlation function that appears in quantum field theory can be expressed by a contraction on the field operators: :\mathcal C(x_1, x_2)=\left \langle 0 \mid \mathcal T\phi_i(x_1)\phi_i(x_2)\mid 0\right \rangle= \langle 0 \mid \overline\mid 0 \rangle=i\Delta_F(x_1-x_2) =i\int, where the operator \overline are the amount that do not annihilate the vacuum state , 0\rangle. Which means that \overline=\mathcal TAB-\mathopen\mathcal TAB\mathclose . This means that \overline is a contraction over \mathcal TAB . Note that the contraction of a time-ordered string of two field operators is a C-number. In the end, we arrive at Wick's theorem: The T-product of a time-ordered free fields string can be expressed in the following manner: :\mathcal T\prod_^m\phi(x_k)=\mathopen\mathcal T\prod\phi_i(x_k)\mathclose+\sum_\overline\mathopen\mathcal T\prod_\phi_i(x_k)\mathclose+ :\mathcal +\sum_\overline\;\overline\mathopen\mathcal T\prod_\phi_i(x_k)\mathclose+\cdots. Applying this theorem to
S-matrix In physics, the ''S''-matrix or scattering matrix is a Matrix (mathematics), matrix that relates the initial state and the final state of a physical system undergoing a scattering, scattering process. It is used in quantum mechanics, scattering ...
elements, we discover that normal-ordered terms acting on vacuum state give a null contribution to the sum. We conclude that ''m'' is even and only completely contracted terms remain. :F_m^i(x)=\left \langle 0 \mid \mathcal T\phi_i(x_1)\phi_i(x_2)\mid 0\right \rangle=\sum_\mathrm\overline\cdots \overline) :G_p^=\left \langle 0 \mid \mathcal T\mathopenv_i(y_1)\mathclose\dots\mathopenv_i(y_n)\mathclose\phi_i(x_1)\cdots \phi_i(x_p)\mid0\right \rangle where ''p'' is the number of interaction fields (or, equivalently, the number of interacting particles) and ''n'' is the development order (or the number of vertices of interaction). For example, if v=gy^4 \Rightarrow \mathopenv_i(y_1)\mathclose=\mathopen\phi_i(y_1)\phi_i(y_1)\phi_i(y_1)\phi_i(y_1)\mathclose This is analogous to the corresponding Isserlis' theorem in statistics for the moments of a
Gaussian distribution In probability theory and statistics, a normal distribution or Gaussian distribution is a type of continuous probability distribution for a real number, real-valued random variable. The general form of its probability density function is f(x ...
. Note that this discussion is in terms of the usual definition of normal ordering which is appropriate for the vacuum expectation values (VEV's) of fields. (Wick's theorem provides as a way of expressing VEV's of ''n'' fields in terms of VEV's of two fields.) There are any other possible definitions of normal ordering, and Wick's theorem is valid irrespective. However Wick's theorem only simplifies computations if the definition of normal ordering used is changed to match the type of expectation value wanted. That is we always want the expectation value of the normal ordered product to be zero. For instance in thermal field theory a different type of expectation value, a thermal trace over the density matrix, requires a different definition of normal ordering.


See also

* Isserlis' theorem


References


Further reading

* (ยง4.3) * {{cite book , first=Silvan S. , last=Schweber , author-link=Silvan S. Schweber , title=An Introduction to Relativistic Quantum Field Theory , url=https://archive.org/details/introductiontore0000schw , url-access=registration , publisher=Harper and Row , location=New York , year=1962 (Chapter 13, Sec c) Eponymous theorems of physics Quantum field theory Scattering theory