The Victoria 18 is an American trailerable sailboat that was designed by

Canadian Canadians (french: Canadiens) are people identified with the country of Canada. This connection may be residential, legal, historical or cultural. For most Canadians, many (or all) of these connections exist and are collectively the source o ...

G. William McVay. It was built in the

United States The United States of America (U.S.A. or USA), commonly known as the United States (U.S. or US) or America, is a country primarily located in North America. It consists of 50 states, a federal district, five major unincorporated territo ...

1977 to 1983.Sherwood, Richard M.: ''A Field Guide to Sailboats of North America, Second Edition'', pages 98-99.

Houghton Mifflin Company Houghton Mifflin Harcourt (; HMH) is an American publisher of textbooks, instructional technology materials, assessments, reference works, and fiction and non-fiction for both young readers and adults. The company is based in the Boston Financ ...

, 1994. Most boats built were

sloop A sloop is a sailboat with a single mast typically having only one headsail in front of the mast and one mainsail aft of (behind) the mast. Such an arrangement is called a fore-and-aft rig, and can be rigged as a Bermuda rig with triangular s ...

rigged, but a few were built as cutters with a

bowsprit The bowsprit of a sailing vessel is a spar extending forward from the vessel's prow. The bowsprit is typically held down by a bobstay that counteracts the forces from the forestays. The word ''bowsprit'' is thought to originate from the Middle ...

. A small number were built as the Victoria 17, with a shorter hull and an outboard rudder. The Victoria 18 is a cabin development of G. William McVay's 1967 open boat design, the

Minuet A minuet (; also spelled menuet) is a social dance of French origin for two people, usually in time. The English word was adapted from the Italian ''minuetto'' and the French ''menuet''. The term also describes the musical form that accompa ...

Production

The design was built by G. William McVay's son, Bill McVay, at his company, Victoria Yachts in

DeBary, Florida DeBary is a city in Volusia County, Florida, United States, on the eastern shore of the St. Johns River near Lake Monroe. According to the 2020 U.S. Census, the city had a population of 20,696. It is part of the Deltona–Daytona Beach–O ...

. Production ran from 1977 until 1983, with about 600 examples of the design completed, but it is now out of production.

Design

The Victoria 18 is a recreational

keelboat A keelboat is a riverine cargo-capable working boat, or a small- to mid-sized recreational sailing yacht. The boats in the first category have shallow structural keels, and are nearly flat-bottomed and often used leeboards if forced in open wa ...

, built predominantly of

fiberglass Fiberglass (American English) or fibreglass (Commonwealth English) is a common type of fiber-reinforced plastic using glass fiber. The fibers may be randomly arranged, flattened into a sheet called a chopped strand mat, or woven into glass cloth ...

, with wood trim. It has a fractional

rig with tapered

anodized Anodizing is an electrolytic passivation process used to increase the thickness of the natural oxide layer on the surface of metal parts. The process is called ''anodizing'' because the part to be treated forms the anode electrode of an electro ...

aluminum Aluminium (aluminum in American and Canadian English) is a chemical element with the symbol Al and atomic number 13. Aluminium has a density lower than those of other common metals, at approximately one third that of steel. It h ...

spars. The hull has a spooned

raked stem The stem is the most forward part of a boat or ship's bow and is an extension of the keel itself. It is often found on wooden boats or ships, but not exclusively. Description The stem is the curved edge stretching from the keel below, up to ...

; a raised counter, angled transom; a keel-hung

rudder A rudder is a primary control surface used to steer a ship, boat, submarine, hovercraft, aircraft, or other vehicle that moves through a fluid medium (generally air or water). On an aircraft the rudder is used primarily to counter adverse ya ...

controlled by a

tiller A tiller or till is a lever used to steer a vehicle. The mechanism is primarily used in watercraft, where it is attached to an outboard motor, rudder post or stock to provide leverage in the form of torque for the helmsman to turn the rudder. ...

and a fixed long

keel The keel is the bottom-most longitudinal structural element on a vessel. On some sailboats, it may have a hydrodynamic and counterbalancing purpose, as well. As the laying down of the keel is the initial step in the construction of a ship, in Br ...

. It displaces and carries of ballast. The boat has a draft of , allowing ground transportation on a trailer. An optional stern mount allows fitting a small

outboard motor An outboard motor is a propulsion system for boats, consisting of a self-contained unit that includes engine, gearbox and propeller or jet drive, designed to be affixed to the outside of the transom. They are the most common motorised method ...

of up to for docking and maneuvering. The design has sleeping accommodation for two people, plus a cooler. A cockpit boom tent was a factory option. Ventilation is provided by four opening ports. For stowage the design has a

lazarette The lazarette (also spelled lazaret) of a boat is an area near or aft of the cockpit. The word is similar to and probably derived from lazaretto. A lazarette is usually a storage locker used for gear or equipment a sailor or boatswain would use ...

. For sailing the design is equipped with a cockpit in length,

genoa Genoa ( ; it, Genova ; lij, Zêna ). is the capital of the Italian region of Liguria and the sixth-largest city in Italy. In 2015, 594,733 people lived within the city's administrative limits. As of the 2011 Italian census, the Province of Ge ...

tracks,

winch A winch is a mechanical device that is used to pull in (wind up) or let out (wind out) or otherwise adjust the tension of a rope or wire rope (also called "cable" or "wire cable"). In its simplest form, it consists of a spool (or drum) attach ...

es and

jib A jib is a triangular sail that sets ahead of the foremast of a sailing vessel. Its tack is fixed to the bowsprit, to the bows, or to the deck between the bowsprit and the foremost mast. Jibs and spinnakers are the two main types of headsails ...

roller reefing Reefing reduces the area of a sail, usually by folding or rolling one edge of the canvas in on itself and attaching the unused portion to a spar or a stay, as the primary measure to preserve a sailing vessel's stability in strong winds. Restoring ...

. For racing additional equipment allowed under the class rules can include an adjustable

backstay A backstay is a piece of standing rigging on a sailing vessel that runs from the mast to either its transom or rear quarter, counteracting the forestay and jib. It is an important sail trim control and has a direct effect on the shape of the mai ...

, a boom vang, barber haulers and a

spinnaker A spinnaker is a sail designed specifically for sailing off the wind on courses between a reach (wind at 90° to the course) to downwind (course in the same direction as the wind). Spinnakers are constructed of lightweight fabric, usually n ...

. The boat is usually raced with a crew of 1-3

sailor A sailor, seaman, mariner, or seafarer is a person who works aboard a watercraft as part of its crew, and may work in any one of a number of different fields that are related to the operation and maintenance of a ship. The profession of the s ...

References

{{Trailer sailers and Trailer yachts worldwide Keelboats 1970s sailboat type designs Sailing yachts Trailer sailers Sailboat type designs by G. William McVay Sailboat types built by Victoria Yachts

Production

Design

See also

References