HOME

TheInfoList



OR:

Tarski's axioms, due to
Alfred Tarski Alfred Tarski (, born Alfred Teitelbaum;School of Mathematics and Statistics, University of St Andrews ''School of Mathematics and Statistics, University of St Andrews''. January 14, 1901 – October 26, 1983) was a Polish-American logician a ...
, are an
axiom An axiom, postulate, or assumption is a statement that is taken to be true, to serve as a premise or starting point for further reasoning and arguments. The word comes from the Ancient Greek word (), meaning 'that which is thought worthy or ...
set for the substantial fragment of
Euclidean geometry Euclidean geometry is a mathematical system attributed to ancient Greek mathematician Euclid, which he described in his textbook on geometry: the '' Elements''. Euclid's approach consists in assuming a small set of intuitively appealing axioms ...
that is formulable in
first-order logic First-order logic—also known as predicate logic, quantificational logic, and first-order predicate calculus—is a collection of formal systems used in mathematics, philosophy, linguistics, and computer science. First-order logic uses quantifie ...
with
identity Identity may refer to: * Identity document * Identity (philosophy) * Identity (social science) * Identity (mathematics) Arts and entertainment Film and television * ''Identity'' (1987 film), an Iranian film * ''Identity'' (2003 film), an ...
, and requiring no
set theory Set theory is the branch of mathematical logic that studies sets, which can be informally described as collections of objects. Although objects of any kind can be collected into a set, set theory, as a branch of mathematics, is mostly concern ...
(i.e., that part of Euclidean geometry that is formulable as an
elementary theory Elementary may refer to: Arts, entertainment, and media Music * ''Elementary'' (Cindy Morgan album), 2001 * ''Elementary'' (The End album), 2007 * ''Elementary'', a Melvin "Wah-Wah Watson" Ragin album, 1977 Other uses in arts, entertainment, an ...
). Other modern axiomizations of Euclidean geometry are
Hilbert's axioms Hilbert's axioms are a set of 20 assumptions proposed by David Hilbert in 1899 in his book ''Grundlagen der Geometrie'' (tr. ''The Foundations of Geometry'') as the foundation for a modern treatment of Euclidean geometry. Other well-known modern ax ...
and
Birkhoff's axioms In 1932, G. D. Birkhoff created a set of four postulates of Euclidean geometry in the plane, sometimes referred to as Birkhoff's axioms. These postulates are all based on basic geometry that can be confirmed experimentally with a scale and protrac ...
.


Overview

Early in his career Tarski taught geometry and researched set theory. His coworker Steven Givant (1999) explained Tarski's take-off point: :From Enriques, Tarski learned of the work of
Mario Pieri Mario Pieri (22 June 1860 – 1 March 1913) was an Italian mathematician who is known for his work on foundations of geometry. Biography Pieri was born in Lucca, Italy, the son of Pellegrino Pieri and Ermina Luporini. Pellegrino was a lawyer. Pie ...
, an Italian geometer who was strongly influenced by Peano. Tarski preferred Pieri's system f his ''Point and Sphere'' memoir where the logical structure and the complexity of the axioms were more transparent. Givant then says that "with typical thoroughness" Tarski devised his system: :What was different about Tarski's approach to geometry? First of all, the axiom system was much simpler than any of the axiom systems that existed up to that time. In fact the length of all of Tarski's axioms together is not much more than just one of Pieri's 24 axioms. It was the first system of Euclidean geometry that was simple enough for all axioms to be expressed in terms of the
primitive notion In mathematics, logic, philosophy, and formal systems, a primitive notion is a concept that is not defined in terms of previously-defined concepts. It is often motivated informally, usually by an appeal to intuition and everyday experience. In an ...
s only, without the help of defined notions. Of even greater importance, for the first time a clear distinction was made between full geometry and its elementary — that is, its first order — part. Like other modern axiomatizations of Euclidean geometry, Tarski's employs a
formal system A formal system is an abstract structure used for inferring theorems from axioms according to a set of rules. These rules, which are used for carrying out the inference of theorems from axioms, are the logical calculus of the formal system. A fo ...
consisting of symbol strings, called sentences, whose construction respects formal syntactical rules, and rules of proof that determine the allowed manipulations of the sentences. Unlike some other modern axiomatizations, such as Birkhoff's and Hilbert's, Tarski's axiomatization has no primitive objects other than ''points'', so a variable or constant cannot refer to a line or an angle. Because points are the only primitive objects, and because Tarski's system is a
first-order theory First-order logic—also known as predicate logic, quantificational logic, and first-order predicate calculus—is a collection of formal systems used in mathematics, philosophy, linguistics, and computer science. First-order logic uses quan ...
, it is not even possible to define lines as sets of points. The only primitive relations (
predicate Predicate or predication may refer to: * Predicate (grammar), in linguistics * Predication (philosophy) * several closely related uses in mathematics and formal logic: **Predicate (mathematical logic) **Propositional function **Finitary relation, o ...
s) are "betweenness" and "congruence" among points. Tarski's axiomatization is shorter than its rivals, in a sense Tarski and Givant (1999) make explicit. It is more concise than Pieri's because Pieri had only two primitive notions while Tarski introduced three: point, betweenness, and congruence. Such economy of primitive and defined notions means that Tarski's system is not very convenient for ''doing'' Euclidean geometry. Rather, Tarski designed his system to facilitate its analysis via the tools of
mathematical logic Mathematical logic is the study of formal logic within mathematics. Major subareas include model theory, proof theory, set theory, and recursion theory. Research in mathematical logic commonly addresses the mathematical properties of forma ...
, i.e., to facilitate deriving its metamathematical properties. Tarski's system has the unusual property that all sentences can be written in universal-existential form, a special case of the
prenex normal form A formula of the predicate calculus is in prenex normal form (PNF) if it is written as a string of quantifiers and bound variables, called the prefix, followed by a quantifier-free part, called the matrix. Together with the normal forms in pro ...
. This form has all universal quantifiers preceding any existential quantifiers, so that all sentences can be recast in the form \forall u \forall v \ldots\exists a \exists b\dots. This fact allowed Tarski to prove that Euclidean geometry is decidable: there exists an
algorithm In mathematics and computer science, an algorithm () is a finite sequence of rigorous instructions, typically used to solve a class of specific problems or to perform a computation. Algorithms are used as specifications for performing ...
which can determine the truth or falsity of any sentence. Tarski's axiomatization is also
complete Complete may refer to: Logic * Completeness (logic) * Completeness of a theory, the property of a theory that every formula in the theory's language or its negation is provable Mathematics * The completeness of the real numbers, which implies t ...
. This does not contradict Gödel's first incompleteness theorem, because Tarski's theory lacks the expressive power needed to interpret
Robinson arithmetic In mathematics, Robinson arithmetic is a finitely axiomatized fragment of first-order Peano arithmetic (PA), first set out by R. M. Robinson in 1950. It is usually denoted Q. Q is almost PA without the axiom schema of mathematical induction. Q i ...
.


The axioms

Alfred Tarski Alfred Tarski (, born Alfred Teitelbaum;School of Mathematics and Statistics, University of St Andrews ''School of Mathematics and Statistics, University of St Andrews''. January 14, 1901 – October 26, 1983) was a Polish-American logician a ...
worked on the axiomatization and metamathematics of
Euclidean geometry Euclidean geometry is a mathematical system attributed to ancient Greek mathematician Euclid, which he described in his textbook on geometry: the '' Elements''. Euclid's approach consists in assuming a small set of intuitively appealing axioms ...
intermittently from 1926 until his death in 1983, with Tarski (1959) heralding his mature interest in the subject. The work of Tarski and his students on Euclidean geometry culminated in the monograph Schwabhäuser, Szmielew, and Tarski (1983), which set out the 10
axiom An axiom, postulate, or assumption is a statement that is taken to be true, to serve as a premise or starting point for further reasoning and arguments. The word comes from the Ancient Greek word (), meaning 'that which is thought worthy or ...
s and one
axiom schema In mathematical logic, an axiom schema (plural: axiom schemata or axiom schemas) generalizes the notion of axiom. Formal definition An axiom schema is a formula in the metalanguage of an axiomatic system, in which one or more schematic variables ap ...
shown below, the associated
metamathematics Metamathematics is the study of mathematics itself using mathematical methods. This study produces metatheories, which are mathematical theories about other mathematical theories. Emphasis on metamathematics (and perhaps the creation of the ter ...
, and a fair bit of the subject. Gupta (1965) made important contributions, and Tarski and Givant (1999) discuss the history.


Fundamental relations

These axioms are a more elegant version of a set Tarski devised in the 1920s as part of his investigation of the metamathematical properties of
Euclidean plane geometry Euclidean geometry is a mathematical system attributed to ancient Greek mathematician Euclid, which he described in his textbook on geometry: the '' Elements''. Euclid's approach consists in assuming a small set of intuitively appealing axio ...
. This objective required reformulating that geometry as a
first-order theory First-order logic—also known as predicate logic, quantificational logic, and first-order predicate calculus—is a collection of formal systems used in mathematics, philosophy, linguistics, and computer science. First-order logic uses quan ...
. Tarski did so by positing a
universe The universe is all of space and time and their contents, including planets, stars, galaxies, and all other forms of matter and energy. The Big Bang theory is the prevailing cosmological description of the development of the univers ...
of points, with lower case letters denoting variables ranging over that universe.
Equality Equality may refer to: Society * Political equality, in which all members of a society are of equal standing ** Consociationalism, in which an ethnically, religiously, or linguistically divided state functions by cooperation of each group's elit ...
is provided by the underlying logic (see First-order logic#Equality and its axioms).Tarski and Givant, 1999, page 177 Tarski then posited two primitive relations: * ''Betweenness'', a
triadic relation In mathematics, a ternary relation or triadic relation is a finitary relation in which the number of places in the relation is three. Ternary relations may also be referred to as 3-adic, 3-ary, 3-dimensional, or 3-place. Just as a binary relati ...
. The
atomic sentence In logic and analytic philosophy, an atomic sentence is a type of declarative sentence which is either true or false (may also be referred to as a proposition, statement or truthbearer) and which cannot be broken down into other simpler sentences ...
''Bxyz'' or ''(y)B(x,z)'' denotes that ''y'' is "between" ''x'' and ''z'', in other words, that ''y'' is a point on the
line segment In geometry, a line segment is a part of a straight line that is bounded by two distinct end points, and contains every point on the line that is between its endpoints. The length of a line segment is given by the Euclidean distance between i ...
''xz''. (This relation is interpreted inclusively, so that ''Bxyz'' is trivially true whenever ''x=y'' or ''y=z''). * '' Congruence'' (or "equidistance"), a tetradic relation. The
atomic sentence In logic and analytic philosophy, an atomic sentence is a type of declarative sentence which is either true or false (may also be referred to as a proposition, statement or truthbearer) and which cannot be broken down into other simpler sentences ...
''Cwxyz'' or ''(w,x)C(y,z)'' or commonly ''wx'' ≡ ''yz'' can be interpreted as ''wx'' is
congruent Congruence may refer to: Mathematics * Congruence (geometry), being the same size and shape * Congruence or congruence relation, in abstract algebra, an equivalence relation on an algebraic structure that is compatible with the structure * In mod ...
to ''yz'', in other words, that the
length Length is a measure of distance. In the International System of Quantities, length is a quantity with dimension distance. In most systems of measurement a base unit for length is chosen, from which all other units are derived. In the Inte ...
of the line segment ''wx'' is equal to the length of the line segment ''yz''. Betweenness captures the
affine Affine may describe any of various topics concerned with connections or affinities. It may refer to: * Affine, a relative by marriage in law and anthropology * Affine cipher, a special case of the more general substitution cipher * Affine comb ...
aspect (such as the parallelism of lines) of Euclidean geometry; congruence, its
metric Metric or metrical may refer to: * Metric system, an internationally adopted decimal system of measurement * An adjective indicating relation to measurement in general, or a noun describing a specific type of measurement Mathematics In mathe ...
aspect (such as angles and distances). The background logic includes
identity Identity may refer to: * Identity document * Identity (philosophy) * Identity (social science) * Identity (mathematics) Arts and entertainment Film and television * ''Identity'' (1987 film), an Iranian film * ''Identity'' (2003 film), an ...
, a
binary relation In mathematics, a binary relation associates elements of one set, called the ''domain'', with elements of another set, called the ''codomain''. A binary relation over sets and is a new set of ordered pairs consisting of elements in and in ...
. The axioms invoke identity (or its negation) on five occasions. The axioms below are grouped by the types of relation they invoke, then sorted, first by the number of existential quantifiers, then by the number of atomic sentences. The axioms should be read as
universal closure In mathematical logic, a universal quantification is a type of quantifier, a logical constant which is interpreted as "given any" or "for all". It expresses that a predicate can be satisfied by every member of a domain of discourse. In other w ...
s; hence any
free variable In mathematics, and in other disciplines involving formal languages, including mathematical logic and computer science, a free variable is a notation (symbol) that specifies places in an expression where substitution may take place and is not ...
s should be taken as tacitly
universally quantified In mathematical logic, a universal quantification is a type of Quantification (logic), quantifier, a logical constant which is interpretation (logic), interpreted as "given any" or "for all". It expresses that a predicate (mathematical logic), pr ...
.


Congruence axioms

; Reflexivity of Congruence: : xy \equiv yx\,. ; Identity of Congruence: : xy \equiv zz \rightarrow x=y. ; Transitivity of Congruence: : (xy \equiv zu \land xy \equiv vw) \rightarrow zu \equiv vw.


Commentary

While the congruence relation xy \equiv zw is, formally, a 4-way relation among points, it may also be thought of, informally, as a binary relation between two line segments xy and zw. The "Reflexivity" and "Transitivity" axioms above, combined, prove both: * that this binary relation is in fact an
equivalence relation In mathematics, an equivalence relation is a binary relation that is reflexive, symmetric and transitive. The equipollence relation between line segments in geometry is a common example of an equivalence relation. Each equivalence relatio ...
** it is reflexive: xy \equiv xy. ** it is symmetric xy \equiv zw \rightarrow zw \equiv xy. ** it is transitive (xy \equiv zu \land zu \equiv vw) \rightarrow xy \equiv vw. * and that the order in which the points of a line segment are specified is irrelevant. ** xy \equiv zw \rightarrow xy \equiv wz. ** xy \equiv zw \rightarrow yx \equiv zw. ** xy \equiv zw \rightarrow yx \equiv wz. The "transitivity" axiom asserts that congruence is Euclidean, in that it respects the first of Euclid's " common notions". The "Identity of Congruence" axiom states, intuitively, that if ''xy'' is congruent with a segment that begins and ends at the same point, ''x'' and ''y'' are the same point. This is closely related to the notion of reflexivity for
binary relation In mathematics, a binary relation associates elements of one set, called the ''domain'', with elements of another set, called the ''codomain''. A binary relation over sets and is a new set of ordered pairs consisting of elements in and in ...
s.


Betweenness axioms

; Identity of Betweenness : Bxyx \rightarrow x=y. The only point on the line segment xx is x itself. ; Axiom of Pasch : (Bxuz \land Byvz) \rightarrow \exists a\, (Buay \land Bvax). ;
Axiom schema In mathematical logic, an axiom schema (plural: axiom schemata or axiom schemas) generalizes the notion of axiom. Formal definition An axiom schema is a formula in the metalanguage of an axiomatic system, in which one or more schematic variables ap ...
of Continuity Let φ(''x'') and ψ(''y'') be first-order formulae containing no free instances of either ''a'' or ''b''. Let there also be no free instances of ''x'' in ψ(''y'') or of ''y'' in φ(''x''). Then all instances of the following schema are axioms: : \exists a \,\forall x\, \forall y\, \phi(x) \land \psi(y)) \rightarrow Baxy\rightarrow \exists b\, \forall x\, \forall y\, \phi(x) \land \psi(y)) \rightarrow Bxby Let ''r'' be a ray with endpoint ''a''. Let the first order formulae φ and ψ define subsets ''X'' and ''Y'' of ''r'', such that every point in ''Y'' is to the right of every point of ''X'' (with respect to ''a''). Then there exists a point ''b'' in ''r'' lying between ''X'' and ''Y''. This is essentially the
Dedekind cut In mathematics, Dedekind cuts, named after German mathematician Richard Dedekind but previously considered by Joseph Bertrand, are а method of construction of the real numbers from the rational numbers. A Dedekind cut is a partition of the r ...
construction, carried out in a way that avoids quantification over sets. ; Lower
Dimension In physics and mathematics, the dimension of a mathematical space (or object) is informally defined as the minimum number of coordinates needed to specify any point within it. Thus, a line has a dimension of one (1D) because only one coord ...
: \exists a \, \exists b\, \exists c\, neg Babc \land \neg Bbca \land \neg Bcab There exist three noncollinear points. Without this axiom, the theory could be modeled by the one-dimensional
real line In elementary mathematics, a number line is a picture of a graduated straight line that serves as visual representation of the real numbers. Every point of a number line is assumed to correspond to a real number, and every real number to a po ...
, a single point, or even the empty set.


Congruence and betweenness

; Upper
Dimension In physics and mathematics, the dimension of a mathematical space (or object) is informally defined as the minimum number of coordinates needed to specify any point within it. Thus, a line has a dimension of one (1D) because only one coord ...
: (xu \equiv xv) \land (yu \equiv yv) \land (zu \equiv zv )\land (u \ne v) \rightarrow (Bxyz \lor Byzx \lor Bzxy). Three points equidistant from two distinct points form a line. Without this axiom, the theory could be modeled by
three-dimensional Three-dimensional space (also: 3D space, 3-space or, rarely, tri-dimensional space) is a geometric setting in which three values (called '' parameters'') are required to determine the position of an element (i.e., point). This is the inform ...
or higher-dimensional space. ; Axiom of Euclid Each of the three variants of this axiom, all equivalent over the remaining Tarski's axioms to Euclid's
parallel postulate In geometry, the parallel postulate, also called Euclid's fifth postulate because it is the fifth postulate in Euclid's ''Elements'', is a distinctive axiom in Euclidean geometry. It states that, in two-dimensional geometry: ''If a line segmen ...
, has an advantage over the others: * A dispenses with
existential quantifier In predicate logic, an existential quantification is a type of quantifier, a logical constant which is interpreted as "there exists", "there is at least one", or "for some". It is usually denoted by the logical operator symbol ∃, which, w ...
s; * B has the fewest variables and
atomic sentence In logic and analytic philosophy, an atomic sentence is a type of declarative sentence which is either true or false (may also be referred to as a proposition, statement or truthbearer) and which cannot be broken down into other simpler sentences ...
s; * C requires but one primitive notion, betweenness. This variant is the usual one given in the literature. : A: ((Bxyw \land xy \equiv yw ) \land (Bxuv \land xu \equiv uv) \land (Byuz \land yu \equiv uz)) \rightarrow yz \equiv vw. Let a line segment join the midpoint of two sides of a given
triangle A triangle is a polygon with three edges and three vertices. It is one of the basic shapes in geometry. A triangle with vertices ''A'', ''B'', and ''C'' is denoted \triangle ABC. In Euclidean geometry, any three points, when non- colline ...
. That line segment will be half as long as the third side. This is equivalent to the interior angles of any triangle summing to two
right angles In geometry and trigonometry, a right angle is an angle of exactly 90 degrees or radians corresponding to a quarter turn. If a ray is placed so that its endpoint is on a line and the adjacent angles are equal, then they are right angles. Th ...
. : B: Bxyz \lor Byzx \lor Bzxy \lor \exists a\, (xa \equiv ya \land xa \equiv za). Given any
triangle A triangle is a polygon with three edges and three vertices. It is one of the basic shapes in geometry. A triangle with vertices ''A'', ''B'', and ''C'' is denoted \triangle ABC. In Euclidean geometry, any three points, when non- colline ...
, there exists a
circle A circle is a shape consisting of all points in a plane that are at a given distance from a given point, the centre. Equivalently, it is the curve traced out by a point that moves in a plane so that its distance from a given point is cons ...
that includes all of its vertices. : C: (Bxuv \land Byuz \land x \ne u) \rightarrow \exists a\, \exists b\,(Bxya \land Bxzb \land Bavb). Given any
angle In Euclidean geometry, an angle is the figure formed by two rays, called the '' sides'' of the angle, sharing a common endpoint, called the ''vertex'' of the angle. Angles formed by two rays lie in the plane that contains the rays. Angles ...
and any point ''v'' in its interior, there exists a line segment including ''v'', with an endpoint on each side of the angle. ; Five Segment : \rightarrow zu \equiv z'u'. Begin with two
triangle A triangle is a polygon with three edges and three vertices. It is one of the basic shapes in geometry. A triangle with vertices ''A'', ''B'', and ''C'' is denoted \triangle ABC. In Euclidean geometry, any three points, when non- colline ...
s, ''xuz'' and ''x'u'z'.'' Draw the line segments ''yu'' and ''y'u','' connecting a vertex of each triangle to a point on the side opposite to the vertex. The result is two divided triangles, each made up of five segments. If four segments of one triangle are each
congruent Congruence may refer to: Mathematics * Congruence (geometry), being the same size and shape * Congruence or congruence relation, in abstract algebra, an equivalence relation on an algebraic structure that is compatible with the structure * In mod ...
to a segment in the other triangle, then the fifth segments in both triangles must be congruent. This is equivalent to the side-angle-side rule for determining that two triangles are congruent; if the angles ''uxz'' and ''u'x'z''' are congruent (there exist congruent triangles ''xuz'' and ''x'u'z'''), and the two pairs of incident sides are congruent (''xu ≡ x'u''' and ''xz ≡ x'z'''), then the remaining pair of sides is also congruent (''uz ≡ u'z). ; Segment Construction : \exists z\, xyz \land yz \equiv ab For any point ''y'', it is possible to draw in any direction (determined by ''x'') a line congruent to any segment ''ab''.


Discussion

Starting from two primitive relations whose fields are a dense
universe The universe is all of space and time and their contents, including planets, stars, galaxies, and all other forms of matter and energy. The Big Bang theory is the prevailing cosmological description of the development of the univers ...
of points, Tarski built a geometry of
line segment In geometry, a line segment is a part of a straight line that is bounded by two distinct end points, and contains every point on the line that is between its endpoints. The length of a line segment is given by the Euclidean distance between i ...
s. According to Tarski and Givant (1999: 192-93), none of the above
axiom An axiom, postulate, or assumption is a statement that is taken to be true, to serve as a premise or starting point for further reasoning and arguments. The word comes from the Ancient Greek word (), meaning 'that which is thought worthy or ...
s are fundamentally new. The first four axioms establish some elementary properties of the two primitive relations. For instance, Reflexivity and Transitivity of Congruence establish that congruence is an
equivalence relation In mathematics, an equivalence relation is a binary relation that is reflexive, symmetric and transitive. The equipollence relation between line segments in geometry is a common example of an equivalence relation. Each equivalence relatio ...
over line segments. The Identity of Congruence and of Betweenness govern the trivial case when those relations are applied to nondistinct points. The theorem ''xy''≡''zz'' ↔ ''x''=''y'' ↔ ''Bxyx'' extends these Identity axioms. A number of other properties of Betweenness are derivable as theorems including: * Reflexivity: ''Bxxy'' ; *
Symmetry Symmetry (from grc, συμμετρία "agreement in dimensions, due proportion, arrangement") in everyday language refers to a sense of harmonious and beautiful proportion and balance. In mathematics, "symmetry" has a more precise definiti ...
: ''Bxyz'' → ''Bzyx'' ; * Transitivity: (''Bxyw'' ∧ ''Byzw'') → ''Bxyz'' ; *
Connectivity Connectivity may refer to: Computing and technology * Connectivity (media), the ability of the social media to accumulate economic capital from the users connections and activities * Internet connectivity, the means by which individual terminal ...
: (''Bxyw'' ∧ ''Bxzw'') → (''Bxyz'' ∨ ''Bxzy''). The last two properties totally order the points making up a line segment. Upper and Lower Dimension together require that any model of these axioms have a specific finite
dimension In physics and mathematics, the dimension of a mathematical space (or object) is informally defined as the minimum number of coordinates needed to specify any point within it. Thus, a line has a dimension of one (1D) because only one coord ...
ality. Suitable changes in these axioms yield axiom sets for
Euclidean geometry Euclidean geometry is a mathematical system attributed to ancient Greek mathematician Euclid, which he described in his textbook on geometry: the '' Elements''. Euclid's approach consists in assuming a small set of intuitively appealing axioms ...
for
dimension In physics and mathematics, the dimension of a mathematical space (or object) is informally defined as the minimum number of coordinates needed to specify any point within it. Thus, a line has a dimension of one (1D) because only one coord ...
s 0, 1, and greater than 2 (Tarski and Givant 1999: Axioms 8(1), 8(n), 9(0), 9(1), 9(n) ). Note that
solid geometry In mathematics, solid geometry or stereometry is the traditional name for the geometry of three-dimensional, Euclidean spaces (i.e., 3D geometry). Stereometry deals with the measurements of volumes of various solid figures (or 3D figures), inc ...
requires no new axioms, unlike the case with
Hilbert's axioms Hilbert's axioms are a set of 20 assumptions proposed by David Hilbert in 1899 in his book ''Grundlagen der Geometrie'' (tr. ''The Foundations of Geometry'') as the foundation for a modern treatment of Euclidean geometry. Other well-known modern ax ...
. Moreover, Lower Dimension for ''n'' dimensions is simply the negation of Upper Dimension for ''n'' - 1 dimensions. When the number of dimensions is greater than 1, Betweenness can be defined in terms of congruence (Tarski and Givant, 1999). First define the relation "≤" (where ab \leq cd is interpreted "the length of line segment ab is less than or equal to the length of line segment cd"): :xy \le zu \leftrightarrow \forall v ( zv \equiv uv \rightarrow \exists w ( xw \equiv yw \land yw \equiv uv ) ). In the case of two dimensions, the intuition is as follows: For any line segment ''xy'', consider the possible range of lengths of ''xv'', where ''v'' is any point on the perpendicular bisector of ''xy''. It is apparent that while there is no upper bound to the length of ''xv'', there is a lower bound, which occurs when ''v'' is the midpoint of ''xy''. So if ''xy'' is shorter than or equal to ''zu'', then the range of possible lengths of ''xv'' will be a superset of the range of possible lengths of ''zw'', where ''w'' is any point on the perpendicular bisector of ''zu''. Betweenness can then be defined by using the intuition that the shortest distance between any two points is a straight line: :Bxyz \leftrightarrow \forall u ( ( ux \le xy \land uz \le zy ) \rightarrow u = y ). The Axiom Schema of Continuity assures that the ordering of points on a line is
complete Complete may refer to: Logic * Completeness (logic) * Completeness of a theory, the property of a theory that every formula in the theory's language or its negation is provable Mathematics * The completeness of the real numbers, which implies t ...
(with respect to first-order definable properties). The Axioms of Pasch and Euclid are well known. Remarkably, Euclidean geometry requires just the following further axioms: * ''Segment Construction''. This axiom makes
measurement Measurement is the quantification of attributes of an object or event, which can be used to compare with other objects or events. In other words, measurement is a process of determining how large or small a physical quantity is as compared ...
and the
Cartesian coordinate system A Cartesian coordinate system (, ) in a plane is a coordinate system that specifies each point uniquely by a pair of numerical coordinates, which are the signed distances to the point from two fixed perpendicular oriented lines, measured in ...
possible—simply assign the
real number In mathematics, a real number is a number that can be used to measure a ''continuous'' one-dimensional quantity such as a distance, duration or temperature. Here, ''continuous'' means that values can have arbitrarily small variations. Every ...
of 1 to some arbitrary non-empty line segment; Let ''wff'' stand for a
well-formed formula In mathematical logic, propositional logic and predicate logic, a well-formed formula, abbreviated WFF or wff, often simply formula, is a finite sequence of symbols from a given alphabet that is part of a formal language. A formal language can ...
(or syntactically correct formula) of elementary geometry. Tarski and Givant (1999: 175) proved that elementary geometry is: *
Consistent In classical deductive logic, a consistent theory is one that does not lead to a logical contradiction. The lack of contradiction can be defined in either semantic or syntactic terms. The semantic definition states that a theory is consistent ...
: There is no wff such that it and its negation are both theorems; *
Complete Complete may refer to: Logic * Completeness (logic) * Completeness of a theory, the property of a theory that every formula in the theory's language or its negation is provable Mathematics * The completeness of the real numbers, which implies t ...
: Every sentence or its negation is a theorem provable from the axioms; * Decidable: There exists an
algorithm In mathematics and computer science, an algorithm () is a finite sequence of rigorous instructions, typically used to solve a class of specific problems or to perform a computation. Algorithms are used as specifications for performing ...
that assigns a
truth value In logic and mathematics, a truth value, sometimes called a logical value, is a value indicating the relation of a proposition to truth, which in classical logic has only two possible values ('' true'' or '' false''). Computing In some pro ...
to every sentence. This follows from Tarski's: **
Decision procedure In computability theory and computational complexity theory, a decision problem is a computational problem that can be posed as a yes–no question of the input values. An example of a decision problem is deciding by means of an algorithm wheth ...
for the
real closed field In mathematics, a real closed field is a field ''F'' that has the same first-order properties as the field of real numbers. Some examples are the field of real numbers, the field of real algebraic numbers, and the field of hyperreal numbers. D ...
, which he found by
quantifier elimination Quantifier elimination is a concept of simplification used in mathematical logic, model theory, and theoretical computer science. Informally, a quantified statement "\exists x such that \ldots" can be viewed as a question "When is there an x such t ...
(the
Tarski–Seidenberg theorem In mathematics, the Tarski–Seidenberg theorem states that a set in (''n'' + 1)-dimensional space defined by polynomial equations and inequalities can be projected down onto ''n''-dimensional space, and the resulting set is still defi ...
); **Axioms admitting of a (multi-dimensional) faithful
interpretation Interpretation may refer to: Culture * Aesthetic interpretation, an explanation of the meaning of a work of art * Allegorical interpretation, an approach that assumes a text should not be interpreted literally * Dramatic Interpretation, an event ...
as a
real closed field In mathematics, a real closed field is a field ''F'' that has the same first-order properties as the field of real numbers. Some examples are the field of real numbers, the field of real algebraic numbers, and the field of hyperreal numbers. D ...
. Gupta (1965) proved the above axioms independent, ''Pasch'' and ''Reflexivity of Congruence'' excepted. Negating the Axiom of Euclid yields
hyperbolic geometry In mathematics, hyperbolic geometry (also called Lobachevskian geometry or Bolyai–Lobachevskian geometry) is a non-Euclidean geometry. The parallel postulate of Euclidean geometry is replaced with: :For any given line ''R'' and point ''P ...
, while eliminating it outright yields
absolute geometry Absolute geometry is a geometry based on an axiom system for Euclidean geometry without the parallel postulate or any of its alternatives. Traditionally, this has meant using only the first four of Euclid's postulates, but since these are not suf ...
. Full (as opposed to elementary) Euclidean geometry requires giving up a first order axiomatization: replace φ(''x'') and ψ(''y'') in the axiom schema of Continuity with ''x'' ∈ ''A'' and ''y'' ∈ ''B'', where ''A'' and ''B'' are universally quantified variables ranging over sets of points.


Comparison with Hilbert

Hilbert's axioms Hilbert's axioms are a set of 20 assumptions proposed by David Hilbert in 1899 in his book ''Grundlagen der Geometrie'' (tr. ''The Foundations of Geometry'') as the foundation for a modern treatment of Euclidean geometry. Other well-known modern ax ...
for plane geometry number 16, and include Transitivity of Congruence and a variant of the Axiom of Pasch. The only notion from intuitive geometry invoked in the remarks to Tarski's axioms is
triangle A triangle is a polygon with three edges and three vertices. It is one of the basic shapes in geometry. A triangle with vertices ''A'', ''B'', and ''C'' is denoted \triangle ABC. In Euclidean geometry, any three points, when non- colline ...
. (Versions B and C of the Axiom of Euclid refer to "circle" and "angle," respectively.) Hilbert's axioms also require "ray," "angle," and the notion of a triangle "including" an angle. In addition to betweenness and congruence, Hilbert's axioms require a primitive
binary relation In mathematics, a binary relation associates elements of one set, called the ''domain'', with elements of another set, called the ''codomain''. A binary relation over sets and is a new set of ordered pairs consisting of elements in and in ...
"on," linking a point and a line. The
Axiom schema In mathematical logic, an axiom schema (plural: axiom schemata or axiom schemas) generalizes the notion of axiom. Formal definition An axiom schema is a formula in the metalanguage of an axiomatic system, in which one or more schematic variables ap ...
of Continuity plays a role similar to Hilbert's two axioms of Continuity. This schema is indispensable; Euclidean geometry in Tarski's (or equivalent) language cannot be finitely axiomatized as a
first-order theory First-order logic—also known as predicate logic, quantificational logic, and first-order predicate calculus—is a collection of formal systems used in mathematics, philosophy, linguistics, and computer science. First-order logic uses quan ...
. Hilbert's axioms do not constitute a first-order theory because his continuity axioms require
second-order logic In logic and mathematics, second-order logic is an extension of first-order logic, which itself is an extension of propositional logic. Second-order logic is in turn extended by higher-order logic and type theory. First-order logic quantifies on ...
. The first four groups of axioms of
Hilbert's axioms Hilbert's axioms are a set of 20 assumptions proposed by David Hilbert in 1899 in his book ''Grundlagen der Geometrie'' (tr. ''The Foundations of Geometry'') as the foundation for a modern treatment of Euclidean geometry. Other well-known modern ax ...
for plane geometry are bi-interpretable with Tarski's axioms minus continuity.


See also

*
Euclidean geometry Euclidean geometry is a mathematical system attributed to ancient Greek mathematician Euclid, which he described in his textbook on geometry: the '' Elements''. Euclid's approach consists in assuming a small set of intuitively appealing axioms ...
*
Euclidean space Euclidean space is the fundamental space of geometry, intended to represent physical space. Originally, that is, in Euclid's ''Elements'', it was the three-dimensional space of Euclidean geometry, but in modern mathematics there are Euclidea ...


Notes


References

* *Givant, Steven (1999) "Unifying threads in Alfred Tarski's Work",
Mathematical Intelligencer ''The Mathematical Intelligencer'' is a mathematical journal published by Springer Verlag that aims at a conversational and scholarly tone, rather than the technical and specialist tone more common among academic journals. Volumes are released qua ...
21:47–58. *Gupta, H. N. (1965) ''Contributions to the Axiomatic Foundations of Geometry''. Ph.D. thesis, University of California-Berkeley. *. Available as a 200
reprint
Brouwer Press, * *Schwabhäuser, W., Szmielew, W., and
Alfred Tarski Alfred Tarski (, born Alfred Teitelbaum;School of Mathematics and Statistics, University of St Andrews ''School of Mathematics and Statistics, University of St Andrews''. January 14, 1901 – October 26, 1983) was a Polish-American logician a ...
, 1983. ''Metamathematische Methoden in der Geometrie''. Springer-Verlag. * {{Mathematical logic Elementary geometry Foundations of geometry Mathematical axioms