HOME

TheInfoList



OR:

The Tribal or F class was a class of
destroyer In naval terminology, a destroyer is a fast, manoeuvrable, long-endurance warship intended to escort larger vessels in a fleet, convoy or battle group and defend them against powerful short range attackers. They were originally developed in ...
s built for the Royal Navy. Twelve ships were built between 1905 and 1908 and all saw service during World War I, where they saw action in the North Sea and English Channel as part of the 6th Flotilla and Dover Patrols.


Design

The preceding River- or E-class destroyers of 1903 had made on the provided by triple expansion steam engines and coal-fired boilers, although was powered by
steam turbine A steam turbine is a machine that extracts thermal energy from pressurized steam and uses it to do mechanical work on a rotating output shaft. Its modern manifestation was invented by Charles Parsons in 1884. Fabrication of a modern steam turbin ...
s.Chesneau and Kolesnik 1979, p. 99. In November 1904, the First Sea Lord "Jackie" Fisher proposed that the next class of destroyers should make at least and should use oil-fired boilers and
steam turbine A steam turbine is a machine that extracts thermal energy from pressurized steam and uses it to do mechanical work on a rotating output shaft. Its modern manifestation was invented by Charles Parsons in 1884. Fabrication of a modern steam turbin ...
s as a means of achieving this.Friedman 2009, pp. 106–107. This resulted in a larger ship to provide the required doubling of installed power over their predecessors, but also pushed the design to the limits of capability of contemporary technology. As a result, the Tribals were severely compromised and a somewhat retrograde step after the successful River class; they were lightly built and proved to be fragile in service. More alarmingly however, they were only provided with 90 tons of bunkerage, and with high fuel consumption resulting from a high power output of , they were highly uneconomical and had a severely limited radius of action; ''Afridi'' and ''Amazon'' once used 9.5 tons of oil each simply to raise steam for a three-mile (5 km) return journey to a fuel depot. Design details were left to the individual builders, as was Royal Navy practice at the time for destroyers. As a result, no two were alikeCocker p27 and there was considerable heterogeneity of detail and appearance, Most noticeably the number of funnels varied from three, in ''Cossack'' and ''Ghurka'', to six in ''Viking''; the latter, with two single and two pairs of funnels becoming the only six-funneled destroyer ever built. With a light mainmast aft, they were the first British destroyers to have two masts. The first five ships were designed with the armament of three QF 12-pounder guns, an improvement from the single 12-pounder and five 6-pounder guns that the River class was completed with, while the number of torpedoes remained at two tubes.Gardiner and Gray, 1985, pp. 71–72.Friedman 2009, pp. 89–90, 107–108. From the sixth ship (''Saracen'') onwards, however, the armament was again increased, to a pair of BL guns, with one gun mounted forward and another on the
quarterdeck The quarterdeck is a raised deck behind the main mast of a sailing ship. Traditionally it was where the captain commanded his vessel and where the ship's colours were kept. This led to its use as the main ceremonial and reception area on bo ...
.Friedman 2009, pp. 108–109. From October 1908, the first five ships were modified by adding another pair of 12 pounder guns.Friedman 2009, p. 108. The shift towards the larger Tribals also created a requirement for a complementary class of smaller "Coastal" destroyers giving rise to the ''Cricket'' class of small TBD, of which 36 were built between 1905 and 1908. The result of this experiment was not ideal and for the following class of destroyers (the 'G', or ''Beagle'', class) the Admiralty reverted to a single, more uniform design for the 1908-9 programme.


Ships

Seven ships to the Admiralty specification were originally envisaged, but only five vessels were ordered and built under the 1905-06 Programme, all to their builders' own designs. Five more vessels were proposed, but only two were ordered and built under the 1906-07 Programme. A final five vessels were ordered and built under the 1907-08 Programme. In October 1916, it was proposed on 8 November 1916 that the two undamaged 'ends' might be joined together, which was completed at Chatham Royal Dockyard 7 June 1917 by joining the undamaged fore section of ''Zulu'' and the rear section of ''Nubian'' respectively. The resulting destroyer was commissioned on 7 June 1917 as , which was sold for scrapping 1919.


Notes


Bibliography

* * * * * * {{DEFAULTSORT:Tribal-class destroyer (1905) Destroyer classes