HOME
        TheInfoList



In fluid dynamics, Sauter mean diameter (SMD, ''d''32 or ''D'', 2 is an average of particle size. It was originally developed by German scientist Josef Sauter in the late 1920s. It is defined as the diameter of a sphere that has the same volume/surface area ratio as a particle of interest. Several methods have been devised to obtain a good estimate of the SMD. SMD is typically defined in terms of the surface diameter, ''d''''s'': :d_s = \sqrt and volume diameter, ''d''''v'': :d_v = \left(\frac\right)^, where ''A''''p'' and ''V''''p'' are the surface area and volume of the particle, respectively. If ''d''''s'' and ''d''''v'' are measured directly by other means without knowledge of ''A''''p'' or ''V''''p'', Sauter diameter for a given particle is :SD = D,2= d_ = \frac. If the actual surface area, ''A''''p'' and volume, ''V''''p'' of the particle are known the equation simplifies further: :\frac = \frac = \frac = \frac :d_ = 6\frac. This is usually taken as the mean of several measurements, to obtain the Sauter mean diameter, SMD: This provides intrinsic data that help determine the particle size for fluid problems.

Applications

The SMD can be defined as the diameter of a drop having the same volume/surface area ratio as the entire spray. :D_s = \frac ::f_i is the scalar variable for the dispersed phase ::d_i is the discrete bubble size SMD is especially important in calculations where the active surface area is important. Such areas include catalysis and applications in fuel combustion.

See also

*Sphericity

References

{{DEFAULTSORT:Sauter Mean Diameter Category:Fluid dynamics