HOME

TheInfoList



OR:

The smock mill is a type of windmill that consists of a sloping, horizontally weatherboarded,
thatch Thatching is the craft of building a roof with dry vegetation such as straw, Phragmites, water reed, Cyperaceae, sedge (''Cladium mariscus''), Juncus, rushes, Calluna, heather, or palm branches, layering the vegetation so as to shed water away fr ...
ed, or shingled tower, usually with six or eight sides. It is topped with a roof or cap that rotates to bring the sails into the wind. This type of windmill got its name from its resemblance to smocks worn by farmers in an earlier period.


Construction

Smock mills differ from
tower mill A tower mill is a type of vertical windmill consisting of a brick or stone tower, on which sits a wooden 'cap' or roof, which can rotate to bring the sails into the wind.Medieval science, technology, and medicine: an encyclopedia (2005), 520 Thi ...
s, which are usually cylindrical rather than hexagonal or octagonal, and built from brick or stone masonry instead of timber. The majority of smock mills are
octagon In geometry, an octagon () is an eight-sided polygon or 8-gon. A '' regular octagon'' has Schläfli symbol and can also be constructed as a quasiregular truncated square, t, which alternates two types of edges. A truncated octagon, t is a ...
al in plan, with a lesser number
hexagon In geometry, a hexagon (from Greek , , meaning "six", and , , meaning "corner, angle") is a six-sided polygon. The total of the internal angles of any simple (non-self-intersecting) hexagon is 720°. Regular hexagon A regular hexagon is de ...
al, such as Killick's Mill, Meopham. A very small number of smock mills were decagonal or
dodecagon In geometry, a dodecagon, or 12-gon, is any twelve-sided polygon. Regular dodecagon A regular polygon, regular dodecagon is a figure with sides of the same length and internal angles of the same size. It has twelve lines of reflective symmetry ...
al in plan, an example of the latter being at Wicken, Cambridgeshire.


Distribution

Smock mills exist in
Europe Europe is a continent located entirely in the Northern Hemisphere and mostly in the Eastern Hemisphere. It is bordered by the Arctic Ocean to the north, the Atlantic Ocean to the west, the Mediterranean Sea to the south, and Asia to the east ...
and particularly in
England England is a Countries of the United Kingdom, country that is part of the United Kingdom. It is located on the island of Great Britain, of which it covers about 62%, and List of islands of England, more than 100 smaller adjacent islands. It ...
, where they were common, particularly in the county of
Kent Kent is a Ceremonial counties of England, ceremonial county in South East England. It is bordered by Essex across the Thames Estuary to the north, the Strait of Dover to the south-east, East Sussex to the south-west, Surrey to the west, and Gr ...
, where the tallest surviving smock mill in the United Kingdom, Union Mill, can be found at Cranbrook. They reached their heyday in the early part of the 19th century, after which the advent of steam power started the decline of the windmill. The East End of Long Island has the greatest concentration of smock mills in the U.S., with Beebe Windmill, Hayground Windmill, Pantigo Windmill, Gardiner, Hook Windmill, Gardiner's Island,
Watermill A watermill or water mill is a mill that uses hydropower. It is a structure that uses a water wheel or water turbine to drive a mechanical process such as mill (grinding), milling (grinding), rolling, or hammering. Such processes are needed in ...
, National Links, Southampton/Shinnecock (Cottage), Shelter Island, Wainscott Windmill, four replicas, Little East Neck H.D., Southampton Mini Golf Hook mill, Corwith Farms and Amagansett -Reform Inn, and four cottages, Gin Lane, A.W.B.Wood House & Windmill (Montauk), Edwin DeRose and Quail Hill Farms (Deep Ln).


Britain

Designed by the civil engineer
John Smeaton John Smeaton (8 June 1724 – 28 October 1792) was an English civil engineer responsible for the design of bridges, canals, harbours and lighthouses. He was also a capable mechanical engineer and an eminent scholar, who introduced various ...
, Chimney Mill in Spital Tongues,
Newcastle upon Tyne Newcastle upon Tyne, or simply Newcastle ( , Received Pronunciation, RP: ), is a City status in the United Kingdom, cathedral city and metropolitan borough in Tyne and Wear, England. It is England's northernmost metropolitan borough, located o ...
was the first five-sailed smock mill in Britain. It was built in 1782 and is the only surviving smock mill in the North East region. However, the sails and original cap are no longer in place. The oldest surviving smock mill in England (dated to 1650) is located in Lacey Green,
Buckinghamshire Buckinghamshire (, abbreviated ''Bucks'') is a Ceremonial counties of England, ceremonial county in South East England and one of the home counties. It is bordered by Northamptonshire to the north, Bedfordshire to the north-east, Hertfordshir ...
. The hexagonal mill has been restored by the Chiltern Society.


Ireland

St Patrick's Tower in Dublin is believed to have once been the largest smock windmill in Europe.


United States


Massachusetts

There are two operating smock mills in
Massachusetts Massachusetts ( ; ), officially the Commonwealth of Massachusetts, is a U.S. state, state in the New England region of the Northeastern United States. It borders the Atlantic Ocean and the Gulf of Maine to its east, Connecticut and Rhode ...
, one on Nantucket Island and one in Orleans. " Old Mill" is the oldest functioning mill in the United States, built in 1746 by a Nantucket sailor who had spent time in Holland, Nathan Wilbur. It is the only survivor of four smock mills that once stood on Popsquachet ("windy hill" in the Wampanoag language) overlooking Nantucket town. Until late in the 19th century "Round-Top Mill" on the site of the present New North Cemetery joined them. The Old Mill was in a derelict condition when it was sold for twenty dollars in 1828 to Jared Gardner for use as "firewood." Instead of dismantling it, Gardner, a carpenter by trade, restored the mill to working condition. It was sold again in 1866 to John Francis Sylvia, a Portuguese miller of Azorean descent, who operated it for many years with his assistant Peter Hoy until it fell into disuse in 1892. In 1897 Miss Caroline French purchased the mill at an auction for $850 and donated it to the Nantucket Historical Association (NHA). The NHA restored it in 1937 and continues to maintain it, grind corn, and guide tours during the summer and early autumn. The second operating smock mill is found in Orleans, on Cape Cod. It was erected about 1793 on Kendrick's Hill as Elisha Cook's Mill, on land that later became Orleans. In 1839 it was moved to Young's hill, and known as Jonathan Young's Mill after one of its five owners. In 1897 Captain Hunt, a wealthy seaman, bought it by oxen and barge to his estate in Hyannisport. Eventually the Gove family bought the Hunt property, and in 1983 gave the mill to the Orleans Historical Society, which donated it to the town of Orleans. It was disassembled, restored, and reassembled at its present site there. The site is open for visitors during the summer.


New York

The East End of Long Island in New York is known for its numerous extant smock mills. These windmills, originating in the late 18th century, were primarily used for grain grinding. Characterized by their wooden coverings resembling smocks, these mills have evolved from agricultural necessities to important historical symbols, embodying the region's heritage. Today, they are often central to preservation efforts, reflecting their value beyond their original functional use.


Rhode Island

The Jamestown Windmill built in 1787 on North Road is a smock mill. It is on Wanton Farm and currently belongs to the Jamestown Historical Society. It is on the National Register of Historic Places.


References


External links

{{Commons category, Smock mills * Good Ground Windmill * List of windmills in New York Windmills eo:Platforma muelejo