Scroll Button

A scroll wheel is a wheel used for scrolling. The term usually refers to such wheels found on computer mice (where they can also be called a mouse wheel). It is often made of hard plastic with a rubbery surface, centred around an internal rotary encoder. It is usually located between the left and right mouse buttons and is positioned perpendicular to the mouse surface. Sometimes the wheel can be pressed left and right, which is actually just two additional macros buttons.

Functionality

The scroll wheel is placed horizontally between the mouse buttons and commonly uses vertical scrolling, wherein rolling the wheel from the bottom side to the top is known as scrolling "upward" or "forward", while the reverse, i.e. rolling the wheel from the top side to the bottom, is known as scrolling "downward" or "backward".

In a graphical user interface, the "upward" motion moves contents of the window downward (and the scrollbar thumb, if present, upward), and vice versa. In other configurations (sometimes called "natural scrolling") the effect is inverted.

On a mouse, the scroll-wheel can often also be used as a third mouse button by pressing down on it – a scroll button.

Some mice can scroll horizontally as well as vertically, using a tilting scroll-wheel, or additional wheel on a perpendicular axis located elsewhere on the mouse.

The wheel is often, but not always, engineered with detents to turn in discrete steps, rather than continuously as an analog axis, to allow the operator to more easily intuit how far they are scrolling.

Scroll wheels are prevalent on modern computer mice and have become an integral part of the hardware interface. However, non-wheeled mice are still available.

Some user interfaces, like Cinnamon (desktop environment), allow using it to adjust brightness and volume by pointing at the respective taskbar icon while scrolling.

History

The scroll wheel on a mouse has been invented multiple times by different people unaware of the others' work.

Other scrolling controls on a mouse, and the use of a wheel for scrolling both precede the combination of wheel and mouse. The earliest known example of the former is the ''Mighty Mouse'' prototype developed jointly by NTT, Japan and ETH Zürich, Switzerland (Kunio Ōno, Ken'ichi Fukaya and Jürg Nievergelt) in 1985. It had a thumb-operated combined analog button/ toggle switch on the side for smooth scrolling.

At the ACM SIGCHI conference in 1989, Gina Danielle Venolia from Apple presented a mouse prototype with a horizontal thumb-wheel for scrolling, or for navigating inwards and outwards: zooming or along the third axis in 3D space. In her patent application from 1992 there are two vertical wheels: left and right of the button(s).
Jack McCauley claims to having developed another mouse prototype at about the same time, also with a top-mounted wheel for a navigating inwards and outwards.

In 1995, the Taiwanese company KYE Systems released the first commercial mouse with scroll wheel. It was named ''Genius EasyScroll'' and was also available as '' Mouse Systems ProAgio''.

The scroll wheel was popularized by the Microsoft IntelliMouse in 1996 along with support for the mouse wheel in Microsoft Office 97. It had been based on ideas developed by Eric Michelman since 1993 with input from Chris Graham.Coding Horror: Meet The Inventor of the Mouse Wheel
/ref>
/ref>

Scroll wheels can also be found on such handheld devices such as PDAs, or mobiles phones such as early Sony models and BlackBerry devices. They have also appeared on keyboards, particularly on Logitech and Microsoft models, usually located to the left of the caps lock key.

Alternatives

Instead of a scroll-wheel, some mice (and other devices) use an alternative but similar component.

Laptop computers often include a touchpad programmed with a pointing device gesture that mimics a scroll-wheel (either by dedicating an edge of the pad for scrolling, or activating scrolling through a multitouch gesture). Many Linux distributions offer a method of scrolling using the touchpad where the user will first activate scroll-mode by pressing in a corner of the pad, and then dragging in a circle around the center of the pad; letting go of the touchpad will switch back to the default mouse-mode.

In mice, alternatives include scroll balls (similar to trackballs, such as on Apple's Mighty Mouse and some serial or PS/2 mice, which combine horizontal and vertical scrolling), pointing sticks, integrated touchpads (as on Apple's Magic Mouse) or optical sensors. Unusual examples include a joystick-style hatswitch present on an early Saitek mouse, and a central 4-way switch-pad found on the Cherry Power Pad Mouse M-1000. Genius also offered the simpler NetMouse in the late 1990s, which had a two-way rocker switch instead of a wheel, marketed as the Magic Scroll Button.

Some ThinkPad laptops allow scrolling using the pointing stick by holding a button above the touch pad.

Other applications

Scroll-wheel motion is often used to control other aspects of a system. For instance, it can allow the user to switch between a series of options, zoom in or out, or increment/decrement any value.

In first-person shooter computer games, scroll-wheels are often used to switch between weapons, zoom in/out a telescopic sight, or even to allow the player to lean left and right if horizontal scrolling is available.

CAD applications such as Autodesk's AutoCAD use the mouse wheel to navigate the space in which the user is drawing. This has become a de-facto standard in many 3D applications, with Trimble's SketchUp (formerly owned by Google) using the scroll wheel to zoom in and out in the 3D space, while a wheel-click and a mouse drag is orbit.

Few mobile phones have physical scroll wheels, such as the Nokia 7110.

See also

* Scroll lock

References

{{DEFAULTSORT:Scroll Wheel
Computer mice
User interface techniques
Wheels