In
physics
Physics is the scientific study of matter, its Elementary particle, fundamental constituents, its motion and behavior through space and time, and the related entities of energy and force. "Physical science is that department of knowledge whi ...
, the Sakuma–Hattori equation is a mathematical model for predicting the amount of
thermal radiation
Thermal radiation is electromagnetic radiation emitted by the thermal motion of particles in matter. All matter with a temperature greater than absolute zero emits thermal radiation. The emission of energy arises from a combination of electro ...
,
radiometric flux or radiometric power emitted from a perfect
blackbody or received by a thermal radiation detector.
History
The Sakuma–Hattori equation was first proposed by Fumihiro Sakuma, Akira Ono and Susumu Hattori in 1982.
[ In 1996, a study investigated the usefulness of various forms of the Sakuma–Hattori equation. This study showed the Planckian form to provide the best fit for most applications.][ This study was done for 10 different forms of the Sakuma–Hattori equation containing not more than three fitting variables. In 2008, BIPM CCT-WG5 recommended its use for radiation thermometry measurement uncertainty budgets below 960 °C.][
]
General form
The Sakuma–Hattori equation gives the electromagnetic signal from thermal radiation based on an object's temperature
Temperature is a physical quantity that quantitatively expresses the attribute of hotness or coldness. Temperature is measurement, measured with a thermometer. It reflects the average kinetic energy of the vibrating and colliding atoms making ...
. The signal can be electromagnetic flux or signal produced by a detector measuring this radiation. It has been suggested that below the silver point, a method using the Sakuma–Hattori equation be used. In its general form it looks like
where:
* is the scalar coefficient
* is the second radiation constant (0.014387752 m⋅K)
* is the temperature-dependent effective wavelength (in meters)
* is the absolute temperature (in K)
Planckian form
Derivation
The Planckian form is realized by the following substitution:
Making this substitution renders the following the Sakuma–Hattori equation in the Planckian form.
; Sakuma–Hattori equation (Planckian form)
:
; Inverse equation[
:
; First derivative][''ASTM Standard E2758-10 – Standard Guide for Selection and Use of Wideband, Low Temperature Infrared Thermometers'', ASTM International, West Conshohocken, PA, (2010).
''Updated'': ASTM E2758-15a(2021), https://www.astm.org/e2758-15ar21.html]
:
Discussion
The Planckian form is recommended for use in calculating uncertainty budgets for radiation thermometry[ and infrared thermometry.]
MSL Technical Guide 22 – Calibration of Low Temperature Infrared Thermometers
' (pdf), Measurement Standards Laboratory of New Zealand (2008). ''Updated'': Version 3. July 2019,
/ref> It is also recommended for use in calibration of radiation thermometers below the silver point.[
The Planckian form resembles Planck's law.
However the Sakuma–Hattori equation becomes very useful when considering low-temperature, wide-band radiation thermometry. To use Planck's law over a wide spectral band, an ]integral
In mathematics, an integral is the continuous analog of a Summation, sum, which is used to calculate area, areas, volume, volumes, and their generalizations. Integration, the process of computing an integral, is one of the two fundamental oper ...
like the following would have to be considered:
This integral yields an incomplete polylogarithm function, which can make its use very cumbersome.
The standard numerical treatment expands the incomplete integral in a geometric series of the exponential
after substituting Then
provides an approximation if the sum is truncated at some order.
The Sakuma–Hattori equation shown above was found to provide the best curve-fit for interpolation of scales for radiation thermometers among a number of alternatives investigated.[Sakuma F, Kobayashi M., "Interpolation equations of scales of radiation thermometers", ''Proceedings of TEMPMEKO 1996'', pp. 305–310 (1996).]
The inverse Sakuma–Hattori function can be used without iterative calculation. This is an additional advantage over integration of Planck's law.
Other forms
The 1996 paper investigated 10 different forms. They are listed in the chart below in order of quality of curve-fit to actual radiometric data.[
]
See also
* Stefan–Boltzmann law
The Stefan–Boltzmann law, also known as ''Stefan's law'', describes the intensity of the thermal radiation emitted by matter in terms of that matter's temperature. It is named for Josef Stefan, who empirically derived the relationship, and Lu ...
* Planck's law
* Rayleigh–Jeans law
In physics, the Rayleigh–Jeans law is an approximation to the spectral radiance of electromagnetic radiation as a function of wavelength from a black body at a given temperature through classical arguments. For wavelength ''λ'', it is
B_\l ...
* Wien approximation
* Wien's displacement law
In physics, Wien's displacement law states that the black-body radiation curve for different temperatures will peak at different wavelengths that are inversely proportional to the temperature. The shift of that peak is a direct consequence of ...
* Kirchhoff's law of thermal radiation
* Infrared thermometer
An infrared thermometer is a thermometer which infers temperature from a portion of the thermal radiation sometimes called black-body radiation emitted by the object being measured. They are sometimes called laser thermometers as a laser is us ...
* Pyrometer
* Thin-filament pyrometry
* Thermography
Infrared thermography (IRT), thermal video or thermal imaging, is a process where a thermal camera captures and creates an image of an object by using infrared radiation emitted from the object in a process, which are examples of infrared im ...
* Black body
* Thermal radiation
Thermal radiation is electromagnetic radiation emitted by the thermal motion of particles in matter. All matter with a temperature greater than absolute zero emits thermal radiation. The emission of energy arises from a combination of electro ...
* Radiance
In radiometry, radiance is the radiant flux emitted, reflected, transmitted or received by a given surface, per unit solid angle per unit projected area. Radiance is used to characterize diffuse emission and reflection of electromagnetic radiati ...
* Emissivity
The emissivity of the surface of a material is its effectiveness in emitting energy as thermal radiation. Thermal radiation is electromagnetic radiation that most commonly includes both visible radiation (light) and infrared radiation, which is n ...
* ASTM Subcommittee E20.02 on Radiation Thermometry
Notes
References
{{DEFAULTSORT:Sakuma-Hattori equation
Statistical mechanics
Equations
1982 in science