SP1 (telecommunications)
   HOME

TheInfoList



OR:

SP-1 (Stored Program 1) was the name of a computerized
telephone exchange A telephone exchange, telephone switch, or central office is a central component of a telecommunications system in the public switched telephone network (PSTN) or in large enterprises. It facilitates the establishment of communication circuits ...
(a so-called switching office) manufactured by Northern Electric (later Northern Telecom and now
Nortel Networks Nortel Networks Corporation (Nortel), formerly Northern Telecom Limited, was a Canadian multinational telecommunications and data networking equipment manufacturer headquartered in Ottawa, Ontario. It was founded in Montreal, Quebec in 1895 ...
beginning in 1972) in
Canada Canada is a country in North America. Its Provinces and territories of Canada, ten provinces and three territories extend from the Atlantic Ocean to the Pacific Ocean and northward into the Arctic Ocean, making it the world's List of coun ...
. It was introduced in 1971 (as stated in a Northern Telecom print ad that is included (page 55) in a history of Nortel, written by Peter C. Newman who was commissioned by Nortel to write it. Copyright is 1995. No ISBN.) As indicated by the name "Stored Program", the SP-1 introduced computer control to the telephone switching market. (AT&T's #1ESS preceded the SP-1 by several years.) A central computer controlled the operation of the switch. Switch behavior was determined by the operation of a computer program. With its use of computer hardware and software control, the SP-1 marked an evolutionary step in telephony design. It was an intermediate form between the previous generation of electromechanical systems and the next generation of fully digital systems. Like the previous generation of systems, the SP-1 was an analog switch that used a special form of mechanical relay (Minibar
crossbar switch In electronics and telecommunications, a crossbar switch (cross-point switch, matrix switch) is a collection of switches arranged in a Matrix (mathematics), matrix configuration. A crossbar switch has multiple input and output lines that form a ...
) to provide the voice connections. The voice signal remained in the analog domain throughout the exchange, with the crossbar switches providing a metallic path to connect the end points of a call together. However the SP1 replaced the previous generation's complex relay-based controllers ( markers) with a modern
Harvard architecture The Harvard architecture is a computer architecture with separate computer storage, storage and signal pathways for Machine code, instructions and data. It is often contrasted with the von Neumann architecture, where program instructions and d ...
electronic computer, with separate data and program memories. SSI DTL logic was used throughout. Two types of memory was used - ferrite sheet memory for the CPU and Piggyback Twistor memory for the storage of program and routing information. A number of variations on the base switch were available. A "two wire" version for local service, a four wire version for toll service. Two/four wire versions were also available as was a TOPS variant that was used to provide Operator services. The first four wire switch (four wire-tops, i.e., it provided toll switching and operator services) was placed in service in Thunder Bay circa 1972. The operator service consoles (CRTs) used an Intel 4004 processor. The next generation of systems evolved from the SP1 design to replace the analog switch with a digital technology. SP-1 proved the feasibility of software-controlled systems for telephony. It set the stage for the introduction of fully digital systems with the development of the DMS (
Digital Multiplex System Digital Multiplex System (DMS) is the name shared among several different telephony product lines from Nortel Networks for wireline and wireless operators. Among them are the DMS-1 (originally named the DMS-256) Rural/Urban digital loop carri ...
s) by Nortel in the 1970s. (Nortel's SL-1 (PBX) was Nortel's first fully digital switching system, and it was introduced in service in 1975.)


See also

*
DMS-100 The DMS-100 is a member of the Digital Multiplex System (DMS) product line of telephone exchange switches manufactured by Northern Telecom. Designed during the 1970s and released in 1979, it can control 100,000 telephone lines. The purpose of ...
*
Electronic Switching System In telecommunications, an electronic switching system (ESS) is a telephone switch that uses solid-state electronics, such as digital electronics and computerized common control, to interconnect telephone circuits for the purpose of establishing te ...
*
1ESS switch The Number One Electronic Switching System (1ESS) was the first large-scale stored program control (SPC) telephone exchange or electronic switching system in the Bell System. It was manufactured by Western Electric and first placed into servi ...
*
TXE TXE (Telephone eXchange Electronic) was a family of telephone exchanges developed by the British General Post Office (GPO), designed to replace the ageing Strowger switches. When World War II ended, the UK telephone exchange suppliers supported t ...
*
Stored Program Control exchange Stored program control (SPC) is a telecommunications technology for telephone exchanges. Its characteristic is that the switching system is controlled by a computer program stored in a memory in the switching system. SPC was the enabling technology ...

SP-1 Technical Bulletin
{{DEFAULTSORT:Sp-1 Switch Telephone exchange equipment Nortel products