Design
The design of the SENA 200 seems very similar to the Soviet BMP series, but according to the Egyptian Defense Industry, it is an entirely new vehicle. The vehicle is based on tracked torsion bars and shock absorbers suspensions consisting on each side of five road wheels with the drive sprocket at the front and the idler at the rear. The upper part is protected by armor plates, and the tracks are made of solid steel and rubber pads.<Protection level
According to the brochure published by the producer of the SENA 200, the hull of the vehicle provides ballistic protection up to Level 4 STANAG 45698 against the firing of small arms 14.5×114mm AP (Armor Piercing). The vehicle floor offers mine protection up to Level 3 STANAG 4569 against mine blast explosion of 8 kg TNT under the body and the tracks. The front and the side of the SENA 200 can be also fitted with an anti-RPG nets (Rocket Propelled Grenade), which can be installed on each side of the vehicle. The nets, made of aramid fibers reinforced with steel masses, are said to achieve an 85% probability of protection and to defeat RPGs by disrupting their fusing mechanism as the incoming rocket is trapped by the net. The under-track or under-belly specifics were not specified, but the blast effects on personnel are mitigated through energy-absorbing seats.Maneuver
The SENA 200 is powered by a HD12ZLG-M 6-cylinder in line turbocharged diesel engine with a 385 hp output. (the original engine being a stroke diesel engine of 360 hp replaced by the "Variants
The exhibited vehicle at the EDEX 2023 exhibition featured the Eagle 1 RCWS from the Egyptian AIO company, while another variant was presented as a combat support vehicle with a one-man turret armed with a 30 mm cannon. Beside the troop carrier and fire support variants, the SENA 200 is proposed also as ambulance, missile launcher, mortar carrier, signal vehicle, command and control vehicle, ammunition carrier, logistic transporter and finally electronic warfare vehicle.Armament
The SENA 200 can be fitted with a wide range of weapon systems and can be armed with an automatic cannon up to 30 mm caliber. It is armed with a 12.7 mm machine gun. Withstands fragments of 155 mm artillery shells at a distance of 30 meters. At EDEX 2021, the SENA 200 was equipped with Remote Controlled Weapon Station (RCWS) Eagle 1 jointly manufactured by the Egyptian company AIO and the Spanish company Escribano Mechanical & Engineering which can mount various weapons including 5.56 mm, 7.62 mm, 12.7 mm, and 14.5 mm calibers. It has a weight of 185 kg excluding the weapon and ammunition.Operators
{{EGY: According to information available the production contract was signed, Factory 200 being currently in the production planning phase. No potential production numbers were provided, assembly being ongoing, delivery of the first batch being planned for January 2024.References