Single channel per carrier (SCPC) refers to using a single
signal
A signal is both the process and the result of transmission of data over some media accomplished by embedding some variation. Signals are important in multiple subject fields including signal processing, information theory and biology.
In ...
at a given
frequency
Frequency is the number of occurrences of a repeating event per unit of time. Frequency is an important parameter used in science and engineering to specify the rate of oscillatory and vibratory phenomena, such as mechanical vibrations, audio ...
and
bandwidth. Most often, this is used on
broadcast satellites to indicate that
radio station
Radio broadcasting is the broadcasting of audio (sound), sometimes with related metadata, by radio waves to radio receivers belonging to a public audience. In terrestrial radio broadcasting the radio waves are broadcast by a land-based rad ...
s are not
multiplexed as
subcarriers onto a single
video
Video is an Electronics, electronic medium for the recording, copying, playback, broadcasting, and display of moving picture, moving image, visual Media (communication), media. Video was first developed for mechanical television systems, whi ...
carrier, but instead independently share a
transponder. It may also be used on other
communications satellite
A communications satellite is an artificial satellite that relays and amplifies radio telecommunication signals via a Transponder (satellite communications), transponder; it creates a communication channel between a source transmitter and a Rad ...
s, or occasionally on non-satellite
transmissions.
In an SCPC system, satellite bandwidth is dedicated to a single source. This makes sense if it is being used for something like
satellite radio
Satellite radio is defined by the International Telecommunication Union (ITU)'s ITU Radio Regulations (RR) as a '' broadcasting-satellite service''. The satellite's signals are broadcast nationwide, across a much wider geographical area than te ...
, which
broadcast
Broadcasting is the data distribution, distribution of sound, audio audiovisual content to dispersed audiences via a electronic medium (communication), mass communications medium, typically one using the electromagnetic spectrum (radio waves), ...
s continuously. Another very common application is voice, where a small amount of fixed bandwidth is required. However, it does not make sense for
burst transmission
Burst may refer to:
*Burst mode (disambiguation), a mode of operation where events occur in rapid succession
**Burst transmission, a term in telecommunications
**Burst switching, a feature of some packet-switched networks
**Bursting, a signaling mo ...
s like
satellite internet access or
telemetry, since a customer would have to pay for the satellite bandwidth even when they were not using it.
Where multiple access is concerned, SCPC is essentially
FDMA. Some applications use SCPC instead of
TDMA, because they require guaranteed, unrestricted bandwidth. As satellite TDMA technology improves however, the applications for SCPC are becoming more limited.
Advantages
* simple and reliable technology
* low-cost equipment
* any bandwidth (up to a full transponder)
** usually 64
kbit/s to 50
Mbit/s
* easy to add additional receive sites (
earth stations)
Disadvantages
* inefficient use of satellite bandwidth for burst transmissions, typically encountered with packet data transmission
* usually requires on-site control
* When used in remote locations, the transmitting dish must be protected.
MCPC
SCPC was the successor multiple channels per carrier (MCPC).
With MCPC, several subcarriers are combined or multiplexed into a single bitstream before being modulated onto a carrier transmitted from a single location to one or more remote sites. This uses
time-division multiplexing (TDM) as well as
frequency-division multiplexing
In telecommunications, frequency-division multiplexing (FDM) is a technique by which the total bandwidth (signal processing), bandwidth available in a communication channel, communication medium is divided into a series of non-overlapping freque ...
. It is a
retronym
A retronym is a newer name for something that differentiates it from something else that is newer, similar, or seen in everyday life; thus, avoiding confusion between the two.
Etymology
The term ''retronym'', a neologism composed of the combi ...
of sorts, as it was the only way
radio network
There are two types of radio network currently in use around the world: the one-to-many (simplex communication) broadcast network commonly used for public information and mass media, mass-media entertainment, and the two-way radio (Duplex (teleco ...
s were transmitted ("
piggybacked" on
television network
A television broadcaster or television network is a telecommunications network for the distribution of television show, television content, where a central operation provides programming to many television stations, pay television providers or ...
s) until SCPC.
In
digital radio and
digital television
Digital television (DTV) is the transmission of television signals using Digital signal, digital encoding, in contrast to the earlier analog television technology which used analog signals. At the time of its development it was considered an ...
, an
ensemble or other multiplex or multichannel stations can be considered MCPC, though the term is generally only applied to satellites.
The major disadvantage of MCPC is that all of the signals must be sent to a single place first, then combined for retransmission — a major reason for using SCPC instead.
Frequency hopping
SCPC became somewhat obsolete after the invention of
frequency hopping.
Frequency hopping (
FHSS) is a system invented by
Hedy Lamarr in which radio signals rapidly change frequency to avoid interception. FHSS required the use of MCPC, as SCPC cannot change frequency mid-broadcast. FHSS was the basis for many technological advancements like
Wi-Fi
Wi-Fi () is a family of wireless network protocols based on the IEEE 802.11 family of standards, which are commonly used for Wireless LAN, local area networking of devices and Internet access, allowing nearby digital devices to exchange data by ...
,
Bluetooth
Bluetooth is a short-range wireless technology standard that is used for exchanging data between fixed and mobile devices over short distances and building personal area networks (PANs). In the most widely used mode, transmission power is li ...
, and
GPS, which could not have been achieved with SCPC.
{{DEFAULTSORT:Single Channel Per Carrier
Broadcast engineering