A bolt or quarrel is a
dart-like
projectile used by
crossbow
A crossbow is a ranged weapon using an elastic launching device consisting of a bow-like assembly called a ''prod'', mounted horizontally on a main frame called a ''tiller'', which is hand-held in a similar fashion to the stock of a long fire ...
s. The name "quarrel" is derived from the
French word ''carré'', meaning square, referring to their typically square heads. Although their lengths vary, bolts are typically shorter and heavier than traditional
arrows shot with longbows.
Parts of the bolt
Point
The point, also called the ''head'' or the ''tip'', is the pointed and weighted front end of the bolt, which is sharp and hard so that it can penetrate the target.
Shaft
The
shaft is the main body of the bolt to which other parts of the bolt are attached. In modern times it is normally made of
carbon fibre
Carbon fiber-reinforced polymers (American English), carbon-fibre-reinforced polymers (Commonwealth English), carbon-fiber-reinforced plastics, carbon-fiber reinforced-thermoplastic (CFRP, CRP, CFRTP), also known as carbon fiber, carbon compo ...
or
aluminium alloy
An aluminium alloy (or aluminum alloy; see spelling differences) is an alloy in which aluminium (Al) is the predominant metal. The typical alloying elements are copper, magnesium, manganese, silicon, tin, nickel and zinc. There are two principa ...
(or sometimes both aluminum and carbon fibre are used), and is very lightweight for its
strength
Strength may refer to:
Physical strength
*Physical strength, as in people or animals
* Hysterical strength, extreme strength occurring when people are in life-and-death situations
*Superhuman strength, great physical strength far above human c ...
. Shafts come with varying degrees of
stiffness — referred to as the "
spine" of the bolt. The more resistant to bending a bolt is, the more "spine" it is said to have, and a crossbow with higher
draw
Draw, drawing, draws, or drawn may refer to:
Common uses
* Draw (terrain), a terrain feature formed by two parallel ridges or spurs with low ground in between them
* Drawing (manufacturing), a process where metal, glass, or plastic or anything ...
weight ideally needs to be paired with a heavier bolt point and higher spine specifications. The weight of a shaft is usually in
grains, and product descriptions may provide the total weight in grains, or in
grains per inch (GPI), for which the total weight of shaft can be calculated by multiplying the GPI value with length of shaft in inches.
Fletching
Fletchings, also referred to as ''vanes'', are
fin
A fin is a thin component or appendage attached to a larger body or structure. Fins typically function as foils that produce lift or thrust, or provide the ability to steer or stabilize motion while traveling in water, air, or other fluids. Fin ...
s located at the rear end of the shaft just before the nock. The fletching is typically made from soft light materials such as
feathers,
plastic
Plastics are a wide range of synthetic or semi-synthetic materials that use polymers as a main ingredient. Their plasticity makes it possible for plastics to be moulded, extruded or pressed into solid objects of various shapes. This adaptab ...
or
silicone rubber. They stabilize the trajectory of the bolt via three different means: resisting
pitching and
yawing of the shaft by acting like a
stabilizer fin (fin-stabilization); reducing deviation from the
longitudinal axis by creating a back-pulling
center of pressure behind the bolt's
center of mass (
drag-stabilization); and in some particular cases, creating a
rotation around the longitudinal axis (spin-stabilization) by having the fletchings mounted at a slight
angle of attack.
There is no rule or formula for determining the length of fletching needed — generally the longer the shaft is, the longer the fletching needs to be, and vice versa.
Nock
A
nock
Nock may refer to:
Archery
* In a bow and arrow, two notches near the bow's respective ends, for attaching the bowstring
* Nock (arrow), in an arrow, the notch in the fletched (feathered) end of the arrow, for engaging the bowstring
People
*H ...
is a small notched piece that is attached to the rear end of the shaft, for engaging and receiving the propulsive push from the
string during shooting. Nocks are made of either plastic or aluminum.
Size and weight
There is not any hard and fast rule of bolt sizing. Generally, the bolts are 15 to 22 inches long but the standard length is 20 inches. Experts recommend longer bolts
but they have certain disadvantages as well.
The weight of the bolt can have a serious effect on the range of the bolt. The bolt's total weight includes the bolt's weight, nock, insert, vanes, and broadhead or field point. Almost all bolt manufacturers will list how many grains each shaft weighs or how many grains are in each inch of the shaft. A more massive bolt, e.g. at least 400 grains, will have better downrange energy and offer better penetration but will travel more slowly and thus drop more due to gravity during its flight. A lighter bolt will fly quicker and give the shooter a longer range, but might not have the desired penetration.
References
{{Authority control
Archery
Arrow types
Projectiles
Crossbows