
In
arithmetic
Arithmetic is an elementary branch of mathematics that deals with numerical operations like addition, subtraction, multiplication, and division. In a wider sense, it also includes exponentiation, extraction of roots, and taking logarithms.
...
, a quotient (from 'how many times', pronounced ) is a quantity produced by the
division of two numbers. The quotient has widespread use throughout mathematics. It has two definitions: either the integer part of a division (in the case of
Euclidean division
In arithmetic, Euclidean division – or division with remainder – is the process of dividing one integer (the dividend) by another (the divisor), in a way that produces an integer quotient and a natural number remainder strictly smaller than ...
) or a
fraction
A fraction (from , "broken") represents a part of a whole or, more generally, any number of equal parts. When spoken in everyday English, a fraction describes how many parts of a certain size there are, for example, one-half, eight-fifths, thre ...
or
ratio
In mathematics, a ratio () shows how many times one number contains another. For example, if there are eight oranges and six lemons in a bowl of fruit, then the ratio of oranges to lemons is eight to six (that is, 8:6, which is equivalent to the ...
(in the case of a general
division). For example, when dividing 20 (the ''dividend'') by 3 (the ''divisor''), the ''quotient'' is 6 (with a remainder of 2) in the first sense and
(a
repeating decimal
A repeating decimal or recurring decimal is a decimal representation of a number whose digits are eventually periodic (that is, after some place, the same sequence of digits is repeated forever); if this sequence consists only of zeros (that i ...
) in the second sense.
In
metrology
Metrology is the scientific study of measurement. It establishes a common understanding of Unit of measurement, units, crucial in linking human activities. Modern metrology has its roots in the French Revolution's political motivation to stan ...
(
International System of Quantities
The International System of Quantities (ISQ) is a standard system of Quantity, quantities used in physics and in modern science in general. It includes basic quantities such as length and mass and the relationships between those quantities. This ...
and the
International System of Units
The International System of Units, internationally known by the abbreviation SI (from French ), is the modern form of the metric system and the world's most widely used system of measurement. It is the only system of measurement with official s ...
), "quotient" refers to the general case with respect to the
units of measurement
A unit of measurement, or unit of measure, is a definite magnitude (mathematics), magnitude of a quantity, defined and adopted by convention or by law, that is used as a standard for measurement of the same kind of quantity. Any other qua ...
of
physical quantities
A physical quantity (or simply quantity) is a property of a material or system that can be quantified by measurement. A physical quantity can be expressed as a ''value'', which is the algebraic multiplication of a '' numerical value'' and a '' ...
.
''
Ratio
In mathematics, a ratio () shows how many times one number contains another. For example, if there are eight oranges and six lemons in a bowl of fruit, then the ratio of oranges to lemons is eight to six (that is, 8:6, which is equivalent to the ...
s'' is the special case for
dimensionless
Dimensionless quantities, or quantities of dimension one, are quantities implicitly defined in a manner that prevents their aggregation into units of measurement. ISBN 978-92-822-2272-0. Typically expressed as ratios that align with another sy ...
quotients of two quantities of the same
kind.
Quotients with a non-trivial
dimension
In physics and mathematics, the dimension of a mathematical space (or object) is informally defined as the minimum number of coordinates needed to specify any point within it. Thus, a line has a dimension of one (1D) because only one coo ...
and
compound units, especially when the divisor is a duration (e.g., "
per second"), are known as
''rates''.
For example,
density
Density (volumetric mass density or specific mass) is the ratio of a substance's mass to its volume. The symbol most often used for density is ''ρ'' (the lower case Greek letter rho), although the Latin letter ''D'' (or ''d'') can also be u ...
(mass divided by volume, in units of
kg/m3) is said to be a "quotient", whereas
mass fraction (mass divided by mass, in kg/kg or in percent) is a "ratio".
''
Specific quantities'' are
intensive quantities resulting from the quotient of a physical quantity by mass, volume, or other measures of the system "size".
Notation
The quotient is most frequently encountered as two numbers, or two variables, divided by a horizontal line. The words "dividend" and "divisor" refer to each individual part, while the word "quotient" refers to the whole.
Integer part definition
The quotient is also less commonly defined as the greatest
whole number of times a divisor may be subtracted from a dividend—before making the
remainder
In mathematics, the remainder is the amount "left over" after performing some computation. In arithmetic, the remainder is the integer "left over" after dividing one integer by another to produce an integer quotient ( integer division). In a ...
negative. For example, the divisor 3 may be subtracted up to 6 times from the dividend 20, before the remainder becomes negative:
: 20 − 3 − 3 − 3 − 3 − 3 − 3 ≥ 0,
while
: 20 − 3 − 3 − 3 − 3 − 3 − 3 − 3 < 0.
In this sense, a quotient is the
integer part of the ratio of two numbers.
Quotient of two integers
A
rational number
In mathematics, a rational number is a number that can be expressed as the quotient or fraction of two integers, a numerator and a non-zero denominator . For example, is a rational number, as is every integer (for example,
The set of all ...
can be defined as the quotient of two
integer
An integer is the number zero (0), a positive natural number (1, 2, 3, ...), or the negation of a positive natural number (−1, −2, −3, ...). The negations or additive inverses of the positive natural numbers are referred to as negative in ...
s (as long as the denominator is non-zero).
A more detailed definition goes as follows:
: A real number ''r'' is rational, if and only if it can be expressed as a quotient of two integers with a nonzero denominator. A real number that is not rational is irrational.
Or more formally:
: Given a real number ''r'', ''r'' is rational if and only if there exists integers ''a'' and ''b'' such that
and
.
The existence of
irrational number
In mathematics, the irrational numbers are all the real numbers that are not rational numbers. That is, irrational numbers cannot be expressed as the ratio of two integers. When the ratio of lengths of two line segments is an irrational number, ...
s—numbers that are not a quotient of two integers—was first discovered in geometry, in such things as the ratio of the diagonal to the side in a square.
More general quotients
Outside of arithmetic, many branches of mathematics have borrowed the word "quotient" to describe structures built by breaking larger structures into pieces. Given a
set
Set, The Set, SET or SETS may refer to:
Science, technology, and mathematics Mathematics
*Set (mathematics), a collection of elements
*Category of sets, the category whose objects and morphisms are sets and total functions, respectively
Electro ...
with an
equivalence relation
In mathematics, an equivalence relation is a binary relation that is reflexive, symmetric, and transitive. The equipollence relation between line segments in geometry is a common example of an equivalence relation. A simpler example is equ ...
defined on it, a "
quotient set
In mathematics, when the elements of some set S have a notion of equivalence (formalized as an equivalence relation), then one may naturally split the set S into equivalence classes. These equivalence classes are constructed so that elements ...
" may be created which contains those equivalence classes as elements. A
quotient group
A quotient group or factor group is a mathematical group obtained by aggregating similar elements of a larger group using an equivalence relation that preserves some of the group structure (the rest of the structure is "factored out"). For ex ...
may be formed by breaking a
group into a number of similar
cosets, while a
quotient space may be formed in a similar process by breaking a
vector space
In mathematics and physics, a vector space (also called a linear space) is a set (mathematics), set whose elements, often called vector (mathematics and physics), ''vectors'', can be added together and multiplied ("scaled") by numbers called sc ...
into a number of similar
linear subspace
In mathematics, the term ''linear'' is used in two distinct senses for two different properties:
* linearity of a ''function (mathematics), function'' (or ''mapping (mathematics), mapping'');
* linearity of a ''polynomial''.
An example of a li ...
s.
See also
*
Product (mathematics)
*
Quotient category
In mathematics, a quotient category is a category (mathematics), category obtained from another category by identifying sets of morphisms. Formally, it is a quotient object in the category of small categories, category of (locally small) categories ...
*
Quotient graph
*
Integer division
*
Quotient module
*
Quotient object
*
Quotient of a formal language, also left and right quotient
*
Quotient ring
In ring theory, a branch of abstract algebra, a quotient ring, also known as factor ring, difference ring or residue class ring, is a construction quite similar to the quotient group in group theory and to the quotient space in linear algebra. ...
*
Quotient set
In mathematics, when the elements of some set S have a notion of equivalence (formalized as an equivalence relation), then one may naturally split the set S into equivalence classes. These equivalence classes are constructed so that elements ...
*
Quotient space (topology)
*
Quotient type
In the field of type theory in computer science, a quotient type is a data type which respects a user-defined equality relation. A quotient type defines an equivalence relation \equiv on elements of the type - for example, we might say that two ...
*
Quotition and partition
References
External links
*
{{Authority control