HOME

TheInfoList



OR:

A plumbing code is a code that provides regulations for the design, installation and inspection of building
plumbing Plumbing is any system that conveys fluids for a wide range of applications. Plumbing uses pipes, valves, plumbing fixtures, tanks, and other apparatuses to convey fluids. Heating and cooling (HVAC), waste removal, and potable water deliv ...
and sanitary systems. In the United States, jurisdictions enact their own codes, some of which are based upon model plumbing codes. The most widely adopted plumbing code in the United States is the International Plumbing Code published by the
International Code Council The International Building Code (IBC) is a model building code developed by the International Code Council (ICC). It has been adopted for use as a base code standard by most jurisdictions in the United States. The IBC addresses both health and saf ...
(ICC). This code is also used as the basis for the plumbing codes of some other countries. Another model plumbing code published and utilized widely across the United States is the
Uniform Plumbing Code Designated as an American National Standard, the Uniform Plumbing Code (UPC) is a model code developed by the International Association of Plumbing and Mechanical Officials ( IAPMO) to govern the installation and inspection of plumbing systems a ...
, published by the International Association of Plumbing and Mechanical Officials (
IAPMO The International Association of Plumbing and Mechanical Officials (IAPMO) coordinates the development and adaptation of plumbing, mechanical, swimming pool and solar energy codes to meet the specific needs of individual jurisdictions both in the ...
), a multinational operation with offices in 13 nations. IAPMO codes are developed using ANSI consensus development procedures. This code serves as the basis for the national plumbing codes in India and Indonesia. Plumbing codes mainly focus on venting. Improper venting can release noxious fumes into homes and buildings.


See also

*
Uniform Plumbing Code Designated as an American National Standard, the Uniform Plumbing Code (UPC) is a model code developed by the International Association of Plumbing and Mechanical Officials ( IAPMO) to govern the installation and inspection of plumbing systems a ...
* Plumbing & Drainage Institute


References

Plumbing {{law-stub