HOME

TheInfoList



OR:

Noether's theorem or Noether's first theorem states that every differentiable
symmetry Symmetry (from grc, συμμετρία "agreement in dimensions, due proportion, arrangement") in everyday language refers to a sense of harmonious and beautiful proportion and balance. In mathematics, "symmetry" has a more precise definiti ...
of the action of a physical system with conservative forces has a corresponding
conservation law In physics, a conservation law states that a particular measurable property of an isolated physical system does not change as the system evolves over time. Exact conservation laws include conservation of energy, conservation of linear momentum, c ...
. The theorem was proven by mathematician Emmy Noether in 1915 and published in 1918. The action of a physical system is the integral over time of a Lagrangian function, from which the system's behavior can be determined by the
principle of least action The stationary-action principle – also known as the principle of least action – is a variational principle that, when applied to the '' action'' of a mechanical system, yields the equations of motion for that system. The principle states tha ...
. This theorem only applies to continuous and smooth symmetries over physical space. Noether's theorem is used in
theoretical physics Theoretical physics is a branch of physics that employs mathematical models and abstractions of physical objects and systems to rationalize, explain and predict natural phenomena. This is in contrast to experimental physics, which uses experim ...
and the
calculus of variations The calculus of variations (or Variational Calculus) is a field of mathematical analysis that uses variations, which are small changes in functions and functionals, to find maxima and minima of functionals: mappings from a set of functions t ...
. It reveals the fundamental relation between the symmetries of a physical system and the conservation laws. It also made modern theoretical physicists much more focused on symmetries of physical systems. A generalization of the formulations on
constants of motion In mechanics, a constant of motion is a quantity that is conserved throughout the motion, imposing in effect a constraint on the motion. However, it is a ''mathematical'' constraint, the natural consequence of the equations of motion, rather than ...
in Lagrangian and
Hamiltonian mechanics Hamiltonian mechanics emerged in 1833 as a reformulation of Lagrangian mechanics. Introduced by Sir William Rowan Hamilton, Hamiltonian mechanics replaces (generalized) velocities \dot q^i used in Lagrangian mechanics with (generalized) ''momenta ...
(developed in 1788 and 1833, respectively), it does not apply to systems that cannot be modeled with a Lagrangian alone (e.g., systems with a
Rayleigh dissipation function In physics, the Rayleigh dissipation function, named after Lord Rayleigh, is a function used to handle the effects of velocity-proportional frictional forces in Lagrangian mechanics. If the frictional force on a particle with velocity \vec can be ...
). In particular,
dissipative In thermodynamics, dissipation is the result of an irreversible process that takes place in homogeneous thermodynamic systems. In a dissipative process, energy ( internal, bulk flow kinetic, or system potential) transforms from an initial form to ...
systems with continuous symmetries need not have a corresponding conservation law.


Basic illustrations and background

As an illustration, if a physical system behaves the same regardless of how it is oriented in space, its Lagrangian is symmetric under continuous rotations: from this symmetry, Noether's theorem dictates that the
angular momentum In physics, angular momentum (rarely, moment of momentum or rotational momentum) is the rotational analog of linear momentum. It is an important physical quantity because it is a conserved quantity—the total angular momentum of a closed syst ...
of the system be conserved, as a consequence of its laws of motion. The physical system itself need not be symmetric; a jagged asteroid tumbling in space conserves angular momentum despite its asymmetry. It is the laws of its motion that are symmetric. As another example, if a physical process exhibits the same outcomes regardless of place or time, then its Lagrangian is symmetric under continuous translations in space and time respectively: by Noether's theorem, these symmetries account for the
conservation law In physics, a conservation law states that a particular measurable property of an isolated physical system does not change as the system evolves over time. Exact conservation laws include conservation of energy, conservation of linear momentum, c ...
s of
linear momentum In Newtonian mechanics, momentum (more specifically linear momentum or translational momentum) is the product of the mass and velocity of an object. It is a vector quantity, possessing a magnitude and a direction. If is an object's mass a ...
and
energy In physics, energy (from Ancient Greek: ἐνέργεια, ''enérgeia'', “activity”) is the quantitative property that is transferred to a body or to a physical system, recognizable in the performance of work and in the form of ...
within this system, respectively. Noether's theorem is important, both because of the insight it gives into conservation laws, and also as a practical calculational tool. It allows investigators to determine the conserved quantities (invariants) from the observed symmetries of a physical system. Conversely, it allows researchers to consider whole classes of hypothetical Lagrangians with given invariants, to describe a physical system. As an illustration, suppose that a physical theory is proposed which conserves a quantity ''X''. A researcher can calculate the types of Lagrangians that conserve ''X'' through a continuous symmetry. Due to Noether's theorem, the properties of these Lagrangians provide further criteria to understand the implications and judge the fitness of the new theory. There are numerous versions of Noether's theorem, with varying degrees of generality. There are natural quantum counterparts of this theorem, expressed in the Ward–Takahashi identities. Generalizations of Noether's theorem to
superspace Superspace is the coordinate space of a theory exhibiting supersymmetry. In such a formulation, along with ordinary space dimensions ''x'', ''y'', ''z'', ..., there are also "anticommuting" dimensions whose coordinates are labeled in Grassmann numb ...
s also exist.


Informal statement of the theorem

All fine technical points aside, Noether's theorem can be stated informally: A more sophisticated version of the theorem involving fields states that: The word "symmetry" in the above statement refers more precisely to the
covariance In probability theory and statistics, covariance is a measure of the joint variability of two random variables. If the greater values of one variable mainly correspond with the greater values of the other variable, and the same holds for the le ...
of the form that a physical law takes with respect to a one-dimensional
Lie group In mathematics, a Lie group (pronounced ) is a group that is also a differentiable manifold. A manifold is a space that locally resembles Euclidean space, whereas groups define the abstract concept of a binary operation along with the addi ...
of transformations satisfying certain technical criteria. The
conservation law In physics, a conservation law states that a particular measurable property of an isolated physical system does not change as the system evolves over time. Exact conservation laws include conservation of energy, conservation of linear momentum, c ...
of a
physical quantity A physical quantity is a physical property of a material or system that can be quantified by measurement. A physical quantity can be expressed as a ''value'', which is the algebraic multiplication of a ' Numerical value ' and a ' Unit '. For exam ...
is usually expressed as a
continuity equation A continuity equation or transport equation is an equation that describes the transport of some quantity. It is particularly simple and powerful when applied to a conserved quantity, but it can be generalized to apply to any extensive quantity. ...
. The formal proof of the theorem utilizes the condition of invariance to derive an expression for a current associated with a conserved physical quantity. In modern (since c. 1980) terminology, the conserved quantity is called the ''Noether charge'', while the flow carrying that charge is called the ''Noether current''. The Noether current is defined
up to Two mathematical objects ''a'' and ''b'' are called equal up to an equivalence relation ''R'' * if ''a'' and ''b'' are related by ''R'', that is, * if ''aRb'' holds, that is, * if the equivalence classes of ''a'' and ''b'' with respect to ''R'' ...
a
solenoidal In vector calculus a solenoidal vector field (also known as an incompressible vector field, a divergence-free vector field, or a transverse vector field) is a vector field v with divergence zero at all points in the field: \nabla \cdot \mathbf ...
(divergenceless) vector field. In the context of gravitation,
Felix Klein Christian Felix Klein (; 25 April 1849 – 22 June 1925) was a German mathematician and mathematics educator, known for his work with group theory, complex analysis, non-Euclidean geometry, and on the associations between geometry and grou ...
's statement of Noether's theorem for action ''I'' stipulates for the invariants:


Brief illustration and overview of the concept

The main idea behind Noether's theorem is most easily illustrated by a system with one coordinate q and a continuous symmetry \varphi: q \mapsto q + \delta q (gray arrows on the diagram). Consider any trajectory q(t) (bold on the diagram) that satisfies the system's laws of motion. That is, the action S governing this system is stationary on this trajectory, i.e. does not change under any local variation of the trajectory. In particular it would not change under a variation that applies the symmetry flow \varphi on a time segment and is motionless outside that segment. To keep the trajectory continuous, we use "buffering" periods of small time \tau to transition between the segments gradually. The total change in the action S now comprises changes brought by every interval in play. Parts, where variation itself vanishes, bring no \Delta S. The middle part does not change the action either, because its transformation \varphi is a symmetry and thus preserves the Lagrangian L and the action S = \int L . The only remaining parts are the "buffering" pieces. Roughly speaking, they contribute mostly through their "slanting" \dot\rightarrow \dot\pm \delta q / \tau. That changes the Lagrangian by \Delta L \approx \bigl(\partial L/\partial \dot\bigr)\Delta \dot , which integrates to \Delta S = \int \Delta L \approx \int \frac\Delta \dot \approx \int \frac\left(\pm \frac\right) \approx \ \pm\frac \delta q = \pm\frac \varphi. These last terms, evaluated around the endpoints t_0 and t_1, should cancel each other in order to make the total change in the action \Delta S be zero, as would be expected if the trajectory is a solution. That is \left(\frac \varphi\right)(t_0) = \left(\frac \varphi\right)(t_1), meaning the quantity \left(\partial L /\partial \dot\right)\varphi is conserved, which is the conclusion of Noether's theorem. For instance if pure translations of q by a constant are the symmetry, then the conserved quantity becomes just \left(\partial L/\partial \dot\right) = p, the canonical momentum. More general cases follow the same idea:


Historical context

A
conservation law In physics, a conservation law states that a particular measurable property of an isolated physical system does not change as the system evolves over time. Exact conservation laws include conservation of energy, conservation of linear momentum, c ...
states that some quantity ''X'' in the mathematical description of a system's evolution remains constant throughout its motion – it is an invariant. Mathematically, the rate of change of ''X'' (its
derivative In mathematics, the derivative of a function of a real variable measures the sensitivity to change of the function value (output value) with respect to a change in its argument (input value). Derivatives are a fundamental tool of calculus. ...
with respect to
time Time is the continued sequence of existence and event (philosophy), events that occurs in an apparently irreversible process, irreversible succession from the past, through the present, into the future. It is a component quantity of various me ...
) is zero, :\frac = \dot = 0 ~. Such quantities are said to be conserved; they are often called
constants of motion In mechanics, a constant of motion is a quantity that is conserved throughout the motion, imposing in effect a constraint on the motion. However, it is a ''mathematical'' constraint, the natural consequence of the equations of motion, rather than ...
(although motion ''per se'' need not be involved, just evolution in time). For example, if the energy of a system is conserved, its energy is invariant at all times, which imposes a constraint on the system's motion and may help in solving for it. Aside from insights that such constants of motion give into the nature of a system, they are a useful calculational tool; for example, an approximate solution can be corrected by finding the nearest state that satisfies the suitable conservation laws. The earliest constants of motion discovered were
momentum In Newtonian mechanics, momentum (more specifically linear momentum or translational momentum) is the product of the mass and velocity of an object. It is a vector quantity, possessing a magnitude and a direction. If is an object's mass ...
and
kinetic energy In physics, the kinetic energy of an object is the energy that it possesses due to its motion. It is defined as the work needed to accelerate a body of a given mass from rest to its stated velocity. Having gained this energy during its acce ...
, which were proposed in the 17th century by
René Descartes René Descartes ( or ; ; Latinized: Renatus Cartesius; 31 March 1596 – 11 February 1650) was a French philosopher, scientist, and mathematician, widely considered a seminal figure in the emergence of modern philosophy and science. Ma ...
and
Gottfried Leibniz Gottfried Wilhelm (von) Leibniz . ( – 14 November 1716) was a German polymath active as a mathematician, philosopher, scientist and diplomat. He is one of the most prominent figures in both the history of philosophy and the history of mathem ...
on the basis of collision experiments, and refined by subsequent researchers.
Isaac Newton Sir Isaac Newton (25 December 1642 – 20 March 1726/27) was an English mathematician, physicist, astronomer, alchemist, Theology, theologian, and author (described in his time as a "natural philosophy, natural philosopher"), widely ...
was the first to enunciate the conservation of momentum in its modern form, and showed that it was a consequence of Newton's third law. According to
general relativity General relativity, also known as the general theory of relativity and Einstein's theory of gravity, is the geometric theory of gravitation published by Albert Einstein in 1915 and is the current description of gravitation in modern physics ...
, the conservation laws of linear momentum, energy and angular momentum are only exactly true globally when expressed in terms of the sum of the
stress–energy tensor The stress–energy tensor, sometimes called the stress–energy–momentum tensor or the energy–momentum tensor, is a tensor physical quantity that describes the density and flux of energy and momentum in spacetime, generalizing the str ...
(non-gravitational stress–energy) and the Landau–Lifshitz stress–energy–momentum pseudotensor (gravitational stress–energy). The local conservation of non-gravitational linear momentum and energy in a free-falling reference frame is expressed by the vanishing of the covariant
divergence In vector calculus, divergence is a vector operator that operates on a vector field, producing a scalar field giving the quantity of the vector field's source at each point. More technically, the divergence represents the volume density of ...
of the
stress–energy tensor The stress–energy tensor, sometimes called the stress–energy–momentum tensor or the energy–momentum tensor, is a tensor physical quantity that describes the density and flux of energy and momentum in spacetime, generalizing the str ...
. Another important conserved quantity, discovered in studies of the
celestial mechanics Celestial mechanics is the branch of astronomy that deals with the motions of objects in outer space. Historically, celestial mechanics applies principles of physics (classical mechanics) to astronomical objects, such as stars and planets, ...
of astronomical bodies, is the Laplace–Runge–Lenz vector. In the late 18th and early 19th centuries, physicists developed more systematic methods for discovering invariants. A major advance came in 1788 with the development of
Lagrangian mechanics In physics, Lagrangian mechanics is a formulation of classical mechanics founded on the stationary-action principle (also known as the principle of least action). It was introduced by the Italian-French mathematician and astronomer Joseph- ...
, which is related to the
principle of least action The stationary-action principle – also known as the principle of least action – is a variational principle that, when applied to the '' action'' of a mechanical system, yields the equations of motion for that system. The principle states tha ...
. In this approach, the state of the system can be described by any type of
generalized coordinate In analytical mechanics, generalized coordinates are a set of parameters used to represent the state of a system in a configuration space. These parameters must uniquely define the configuration of the system relative to a reference state.,p. 39 ...
s q; the laws of motion need not be expressed in a
Cartesian coordinate system A Cartesian coordinate system (, ) in a plane is a coordinate system that specifies each point uniquely by a pair of numerical coordinates, which are the signed distances to the point from two fixed perpendicular oriented lines, measured in ...
, as was customary in Newtonian mechanics. The action is defined as the time integral ''I'' of a function known as the Lagrangian ''L'' :I = \int L(\mathbf, \dot, t) \, dt ~, where the dot over q signifies the rate of change of the coordinates q, :\dot = \frac ~.
Hamilton's principle In physics, Hamilton's principle is William Rowan Hamilton's formulation of the principle of stationary action. It states that the dynamics of a physical system are determined by a variational problem for a functional based on a single function, ...
states that the physical path q(''t'')—the one actually taken by the system—is a path for which infinitesimal variations in that path cause no change in ''I'', at least up to first order. This principle results in the Euler–Lagrange equations, :\frac \left( \frac \right) = \frac ~. Thus, if one of the coordinates, say ''qk'', does not appear in the Lagrangian, the right-hand side of the equation is zero, and the left-hand side requires that :\frac \left( \frac \right) = \frac = 0~, where the momentum : p_k = \frac is conserved throughout the motion (on the physical path). Thus, the absence of the ignorable coordinate ''qk'' from the Lagrangian implies that the Lagrangian is unaffected by changes or transformations of ''qk''; the Lagrangian is invariant, and is said to exhibit a
symmetry Symmetry (from grc, συμμετρία "agreement in dimensions, due proportion, arrangement") in everyday language refers to a sense of harmonious and beautiful proportion and balance. In mathematics, "symmetry" has a more precise definiti ...
under such transformations. This is the seed idea generalized in Noether's theorem. Several alternative methods for finding conserved quantities were developed in the 19th century, especially by
William Rowan Hamilton Sir William Rowan Hamilton Doctor of Law, LL.D, Doctor of Civil Law, DCL, Royal Irish Academy, MRIA, Royal Astronomical Society#Fellow, FRAS (3/4 August 1805 – 2 September 1865) was an Irish mathematician, astronomer, and physicist. He was the ...
. For example, he developed a theory of canonical transformations which allowed changing coordinates so that some coordinates disappeared from the Lagrangian, as above, resulting in conserved canonical momenta. Another approach, and perhaps the most efficient for finding conserved quantities, is the Hamilton–Jacobi equation.


Mathematical expression


Simple form using perturbations

The essence of Noether's theorem is generalizing the notion of ignorable coordinates. One can assume that the Lagrangian ''L'' defined above is invariant under small perturbations (warpings) of the time variable ''t'' and the
generalized coordinate In analytical mechanics, generalized coordinates are a set of parameters used to represent the state of a system in a configuration space. These parameters must uniquely define the configuration of the system relative to a reference state.,p. 39 ...
s q. One may write :\begin t &\rightarrow t^ = t + \delta t \\ \mathbf &\rightarrow \mathbf^ = \mathbf + \delta \mathbf ~, \end where the perturbations ''δt'' and ''δ''q are both small, but variable. For generality, assume there are (say) ''N'' such symmetry transformations of the action, i.e. transformations leaving the action unchanged; labelled by an index ''r'' = 1, 2, 3, ..., ''N''. Then the resultant perturbation can be written as a linear sum of the individual types of perturbations, :\begin \delta t &= \sum_r \varepsilon_r T_r \\ \delta \mathbf &= \sum_r \varepsilon_r \mathbf_r ~, \end where ''ε''''r'' are
infinitesimal In mathematics, an infinitesimal number is a quantity that is closer to zero than any standard real number, but that is not zero. The word ''infinitesimal'' comes from a 17th-century Modern Latin coinage ''infinitesimus'', which originally re ...
parameter coefficients corresponding to each: * generator ''Tr'' of
time evolution Time evolution is the change of state brought about by the passage of time, applicable to systems with internal state (also called ''stateful systems''). In this formulation, ''time'' is not required to be a continuous parameter, but may be disc ...
, and * generator Q''r'' of the generalized coordinates. For translations, Q''r'' is a constant with units of
length Length is a measure of distance. In the International System of Quantities, length is a quantity with dimension distance. In most systems of measurement a base unit for length is chosen, from which all other units are derived. In the Inte ...
; for rotations, it is an expression linear in the components of q, and the parameters make up an
angle In Euclidean geometry, an angle is the figure formed by two rays, called the '' sides'' of the angle, sharing a common endpoint, called the ''vertex'' of the angle. Angles formed by two rays lie in the plane that contains the rays. Angles ...
. Using these definitions, Noether showed that the ''N'' quantities :\left(\frac \cdot \dot - L \right) T_r - \frac \cdot \mathbf_r are conserved (
constants of motion In mechanics, a constant of motion is a quantity that is conserved throughout the motion, imposing in effect a constraint on the motion. However, it is a ''mathematical'' constraint, the natural consequence of the equations of motion, rather than ...
).


Examples

I. Time invariance For illustration, consider a Lagrangian that does not depend on time, i.e., that is invariant (symmetric) under changes ''t'' → ''t'' + δ''t'', without any change in the coordinates q. In this case, ''N'' = 1, ''T'' = 1 and Q = 0; the corresponding conserved quantity is the total
energy In physics, energy (from Ancient Greek: ἐνέργεια, ''enérgeia'', “activity”) is the quantitative property that is transferred to a body or to a physical system, recognizable in the performance of work and in the form of ...
''H'' :H = \frac \cdot \dot - L. II. Translational invariance Consider a Lagrangian which does not depend on an ("ignorable", as above) coordinate ''q''''k''; so it is invariant (symmetric) under changes ''q''''k'' → ''q''''k'' + ''δq''''k''. In that case, ''N'' = 1, ''T'' = 0, and ''Q''''k'' = 1; the conserved quantity is the corresponding linear
momentum In Newtonian mechanics, momentum (more specifically linear momentum or translational momentum) is the product of the mass and velocity of an object. It is a vector quantity, possessing a magnitude and a direction. If is an object's mass ...
''p''''k'' :p_k = \frac. In special and
general relativity General relativity, also known as the general theory of relativity and Einstein's theory of gravity, is the geometric theory of gravitation published by Albert Einstein in 1915 and is the current description of gravitation in modern physics ...
, these two conservation laws can be expressed either ''globally'' (as it is done above), or ''locally'' as a continuity equation. The global versions can be united into a single global conservation law: the conservation of the energy-momentum 4-vector. The local versions of energy and momentum conservation (at any point in space-time) can also be united, into the conservation of a quantity defined ''locally'' at the space-time point: the
stress–energy tensor The stress–energy tensor, sometimes called the stress–energy–momentum tensor or the energy–momentum tensor, is a tensor physical quantity that describes the density and flux of energy and momentum in spacetime, generalizing the str ...
(this will be derived in the next section). III. Rotational invariance The conservation of the
angular momentum In physics, angular momentum (rarely, moment of momentum or rotational momentum) is the rotational analog of linear momentum. It is an important physical quantity because it is a conserved quantity—the total angular momentum of a closed syst ...
L = r × p is analogous to its linear momentum counterpart. It is assumed that the symmetry of the Lagrangian is rotational, i.e., that the Lagrangian does not depend on the absolute orientation of the physical system in space. For concreteness, assume that the Lagrangian does not change under small rotations of an angle ''δθ'' about an axis n; such a rotation transforms the
Cartesian coordinates A Cartesian coordinate system (, ) in a plane is a coordinate system that specifies each point uniquely by a pair of numerical coordinates, which are the signed distances to the point from two fixed perpendicular oriented lines, measured in ...
by the equation :\mathbf \rightarrow \mathbf + \delta\theta \, \mathbf \times \mathbf. Since time is not being transformed, ''T'' = 0, and ''N'' = 1. Taking ''δθ'' as the ''ε'' parameter and the Cartesian coordinates r as the generalized coordinates q, the corresponding Q variables are given by :\mathbf = \mathbf \times \mathbf. Then Noether's theorem states that the following quantity is conserved, : \frac \cdot \mathbf = \mathbf \cdot \left( \mathbf \times \mathbf \right) = \mathbf \cdot \left( \mathbf \times \mathbf \right) = \mathbf \cdot \mathbf. In other words, the component of the angular momentum L along the n axis is conserved. And if n is arbitrary, i.e., if the system is insensitive to any rotation, then every component of L is conserved; in short,
angular momentum In physics, angular momentum (rarely, moment of momentum or rotational momentum) is the rotational analog of linear momentum. It is an important physical quantity because it is a conserved quantity—the total angular momentum of a closed syst ...
is conserved.


Field theory version

Although useful in its own right, the version of Noether's theorem just given is a special case of the general version derived in 1915. To give the flavor of the general theorem, a version of Noether's theorem for continuous fields in four-dimensional space–time is now given. Since field theory problems are more common in modern physics than
mechanics Mechanics (from Ancient Greek: μηχανική, ''mēkhanikḗ'', "of machines") is the area of mathematics and physics concerned with the relationships between force, matter, and motion among physical objects. Forces applied to objec ...
problems, this field theory version is the most commonly used (or most often implemented) version of Noether's theorem. Let there be a set of differentiable fields \varphi defined over all space and time; for example, the temperature T(\mathbf, t) would be representative of such a field, being a number defined at every place and time. The
principle of least action The stationary-action principle – also known as the principle of least action – is a variational principle that, when applied to the '' action'' of a mechanical system, yields the equations of motion for that system. The principle states tha ...
can be applied to such fields, but the action is now an integral over space and time :\mathcal = \int \mathcal \left(\varphi, \partial_\mu \varphi, x^\mu \right) \, d^4 x (the theorem can be further generalized to the case where the Lagrangian depends on up to the ''n''th derivative, and can also be formulated using
jet bundle In differential topology, the jet bundle is a certain construction that makes a new smooth fiber bundle out of a given smooth fiber bundle. It makes it possible to write differential equations on sections of a fiber bundle in an invariant form. ...
s). A continuous transformation of the fields \varphi can be written infinitesimally as :\varphi \mapsto \varphi + \varepsilon \Psi, where \Psi is in general a function that may depend on both x^\mu and \varphi. The condition for \Psi to generate a physical symmetry is that the action \mathcal is left invariant. This will certainly be true if the Lagrangian density \mathcal is left invariant, but it will also be true if the Lagrangian changes by a divergence, :\mathcal \mapsto \mathcal + \varepsilon \partial_\mu \Lambda^\mu, since the integral of a divergence becomes a boundary term according to the
divergence theorem In vector calculus, the divergence theorem, also known as Gauss's theorem or Ostrogradsky's theorem, reprinted in is a theorem which relates the '' flux'' of a vector field through a closed surface to the ''divergence'' of the field in the ...
. A system described by a given action might have multiple independent symmetries of this type, indexed by r = 1, 2, \ldots, N, so the most general symmetry transformation would be written as :\varphi \mapsto \varphi + \varepsilon_r \Psi_r, with the consequence :\mathcal \mapsto \mathcal + \varepsilon_r \partial_\mu \Lambda^\mu_r. For such systems, Noether's theorem states that there are N conserved current densities :j^\nu_r = \Lambda^\nu_r - \frac \cdot \Psi_r (where the dot product is understood to contract the ''field'' indices, not the \nu index or r index). In such cases, the
conservation law In physics, a conservation law states that a particular measurable property of an isolated physical system does not change as the system evolves over time. Exact conservation laws include conservation of energy, conservation of linear momentum, c ...
is expressed in a four-dimensional way :\partial_\nu j^\nu = 0, which expresses the idea that the amount of a conserved quantity within a sphere cannot change unless some of it flows out of the sphere. For example,
electric charge Electric charge is the physical property of matter that causes charged matter to experience a force when placed in an electromagnetic field. Electric charge can be ''positive'' or ''negative'' (commonly carried by protons and electrons res ...
is conserved; the amount of charge within a sphere cannot change unless some of the charge leaves the sphere. For illustration, consider a physical system of fields that behaves the same under translations in time and space, as considered above; in other words, L \left(\boldsymbol\varphi, \partial_\mu, x^\mu \right) is constant in its third argument. In that case, ''N'' = 4, one for each dimension of space and time. An infinitesimal translation in space, x^\mu \mapsto x^\mu + \varepsilon_r \delta^\mu_r (with \delta denoting the
Kronecker delta In mathematics, the Kronecker delta (named after Leopold Kronecker) is a function of two variables, usually just non-negative integers. The function is 1 if the variables are equal, and 0 otherwise: \delta_ = \begin 0 &\text i \neq j, \\ 1 & ...
), affects the fields as \varphi(x^\mu) \mapsto \varphi\left(x^\mu - \varepsilon_r \delta^\mu_r\right): that is, relabelling the coordinates is equivalent to leaving the coordinates in place while translating the field itself, which in turn is equivalent to transforming the field by replacing its value at each point x^\mu with the value at the point x^\mu - \varepsilon X^\mu "behind" it which would be mapped onto x^\mu by the infinitesimal displacement under consideration. Since this is infinitesimal, we may write this transformation as :\Psi_r = -\delta^\mu_r \partial_\mu \varphi. The Lagrangian density transforms in the same way, \mathcal\left(x^\mu\right) \mapsto \mathcal\left(x^\mu - \varepsilon_r \delta^\mu_r\right), so :\Lambda^\mu_r = -\delta^\mu_r \mathcal and thus Noether's theorem corresponds to the conservation law for the
stress–energy tensor The stress–energy tensor, sometimes called the stress–energy–momentum tensor or the energy–momentum tensor, is a tensor physical quantity that describes the density and flux of energy and momentum in spacetime, generalizing the str ...
''T''''μ''''ν'', where we have used \mu in place of r. To wit, by using the expression given earlier, and collecting the four conserved currents (one for each \mu) into a tensor T, Noether's theorem gives : T_\mu^\nu = -\delta^\nu_\mu \mathcal + \delta^\sigma_\mu \partial_\sigma \varphi \frac = \left(\frac\right) \cdot \varphi_ - \delta^\nu_\mu \mathcal with :T_\mu^\nu_ = 0 (we relabelled \mu as \sigma at an intermediate step to avoid conflict). (However, the T obtained in this way may differ from the symmetric tensor used as the source term in general relativity; see Canonical stress–energy tensor.) The conservation of
electric charge Electric charge is the physical property of matter that causes charged matter to experience a force when placed in an electromagnetic field. Electric charge can be ''positive'' or ''negative'' (commonly carried by protons and electrons res ...
, by contrast, can be derived by considering ''Ψ'' linear in the fields ''φ'' rather than in the derivatives. In
quantum mechanics Quantum mechanics is a fundamental theory in physics that provides a description of the physical properties of nature at the scale of atoms and subatomic particles. It is the foundation of all quantum physics including quantum chemistry, ...
, the
probability amplitude In quantum mechanics, a probability amplitude is a complex number used for describing the behaviour of systems. The modulus squared of this quantity represents a probability density. Probability amplitudes provide a relationship between the qu ...
''ψ''(x) of finding a particle at a point x is a complex field ''φ'', because it ascribes a
complex number In mathematics, a complex number is an element of a number system that extends the real numbers with a specific element denoted , called the imaginary unit and satisfying the equation i^= -1; every complex number can be expressed in the fo ...
to every point in space and time. The probability amplitude itself is physically unmeasurable; only the probability ''p'' = , ''ψ'', 2 can be inferred from a set of measurements. Therefore, the system is invariant under transformations of the ''ψ'' field and its
complex conjugate In mathematics, the complex conjugate of a complex number is the number with an equal real part and an imaginary part equal in magnitude but opposite in sign. That is, (if a and b are real, then) the complex conjugate of a + bi is equal to a - ...
field ''ψ''* that leave , ''ψ'', 2 unchanged, such as :\psi \rightarrow e^ \psi\ ,\ \psi^ \rightarrow e^ \psi^~, a complex rotation. In the limit when the phase ''θ'' becomes infinitesimally small, ''δθ'', it may be taken as the parameter ''ε'', while the ''Ψ'' are equal to ''iψ'' and −''iψ''*, respectively. A specific example is the
Klein–Gordon equation The Klein–Gordon equation (Klein–Fock–Gordon equation or sometimes Klein–Gordon–Fock equation) is a relativistic wave equation, related to the Schrödinger equation. It is second-order in space and time and manifestly Lorentz-covariant ...
, the relativistically correct version of the
Schrödinger equation The Schrödinger equation is a linear partial differential equation that governs the wave function of a quantum-mechanical system. It is a key result in quantum mechanics, and its discovery was a significant landmark in the development of th ...
for spinless particles, which has the Lagrangian density :L = \partial_\psi \partial_\psi^ \eta^ + m^2 \psi \psi^. In this case, Noether's theorem states that the conserved (∂ ⋅ ''j'' = 0) current equals :j^\nu = i \left( \frac \psi^ - \frac \psi \right) \eta^~, which, when multiplied by the charge on that species of particle, equals the electric current density due to that type of particle. This "gauge invariance" was first noted by
Hermann Weyl Hermann Klaus Hugo Weyl, (; 9 November 1885 – 8 December 1955) was a German mathematician, theoretical physicist and philosopher. Although much of his working life was spent in Zürich, Switzerland, and then Princeton, New Jersey, he is asso ...
, and is one of the prototype gauge symmetries of physics.


Derivations


One independent variable

Consider the simplest case, a system with one independent variable, time. Suppose the dependent variables q are such that the action integral I = \int_^ L mathbf_[t_\dot_[t.html"_;"title=".html"_;"title="mathbf_[t">mathbf_[t_\dot_[t">.html"_;"title="mathbf_[t">mathbf_[t_\dot_[t_t.html" ;"title="">mathbf_[t_\dot_[t.html" ;"title=".html" ;"title="mathbf [t">mathbf [t \dot [t">.html" ;"title="mathbf [t">mathbf [t \dot [t t">">mathbf_[t_\dot_[t.html" ;"title=".html" ;"title="mathbf [t">mathbf [t \dot [t">.html" ;"title="mathbf [t">mathbf [t \dot [t t\, dt is invariant under brief infinitesimal variations in the dependent variables. In other words, they satisfy the Euler–Lagrange equations :\frac \frac = \frac [t]. And suppose that the integral is invariant under a continuous symmetry. Mathematically such a symmetry is represented as a flow (mathematics), flow, φ, which acts on the variables as follows :\begin t &\rightarrow t' = t + \varepsilon T \\ \mathbf &\rightarrow \mathbf' '= \varphi mathbf_[t_\varepsilon.html"_;"title=".html"_;"title="mathbf_[t">mathbf_[t_\varepsilon">.html"_;"title="mathbf_[t">mathbf_[t_\varepsilon=_\varphi_[\mathbf_[t'_-_\varepsilon_T.html" ;"title="">mathbf_[t_\varepsilon.html" ;"title=".html" ;"title="mathbf [t">mathbf [t \varepsilon">.html" ;"title="mathbf [t">mathbf [t \varepsilon= \varphi [\mathbf [t' - \varepsilon T">">mathbf_[t_\varepsilon.html" ;"title=".html" ;"title="mathbf [t">mathbf [t \varepsilon">.html" ;"title="mathbf [t">mathbf [t \varepsilon= \varphi [\mathbf [t' - \varepsilon T \varepsilon] \end where ''ε'' is a real variable indicating the amount of flow, and ''T'' is a real constant (which could be zero) indicating how much the flow shifts time. : \dot \rightarrow \dot' '= \frac \varphi mathbf_[t_\varepsilon.html"_;"title=".html"_;"title="mathbf_[t">mathbf_[t_\varepsilon">.html"_;"title="mathbf_[t">mathbf_[t_\varepsilon=_\frac_[\mathbf_[t'_-_\varepsilon_T.html" ;"title="">mathbf_[t_\varepsilon.html" ;"title=".html" ;"title="mathbf [t">mathbf [t \varepsilon">.html" ;"title="mathbf [t">mathbf [t \varepsilon= \frac [\mathbf [t' - \varepsilon T">">mathbf_[t_\varepsilon.html" ;"title=".html" ;"title="mathbf [t">mathbf [t \varepsilon">.html" ;"title="mathbf [t">mathbf [t \varepsilon= \frac [\mathbf [t' - \varepsilon T \varepsilon] \dot [t' - \varepsilon T] . The action integral flows to : \begin I' [\varepsilon] & = \int_^ L [\mathbf'[t'], \dot' [t'], t'] \, dt' \\ pt& = \int_^ L [\varphi mathbf_[t'_-_\varepsilon_T_\varepsilon.html" ;"title="' - \varepsilon T">mathbf [t' - \varepsilon T \varepsilon">' - \varepsilon T">mathbf [t' - \varepsilon T \varepsilon \frac mathbf [t' - \varepsilon T \varepsilon] \dot [t' - \varepsilon T], t'] \, dt' \end which may be regarded as a function of ''ε''. Calculating the derivative at ''ε = 0 and using Leibniz's rule (derivatives and integrals), Leibniz's rule, we get : \begin 0 = \frac = & L mathbf_[t_2_\dot_[t_2.html"_;"title="_2.html"_;"title="mathbf_[t_2">mathbf_[t_2_\dot_[t_2">_2.html"_;"title="mathbf_[t_2">mathbf_[t_2_\dot_[t_2_t_2.html" ;"title="_2">mathbf_[t_2_\dot_[t_2.html" ;"title="_2.html" ;"title="mathbf [t_2">mathbf [t_2 \dot [t_2">_2.html" ;"title="mathbf [t_2">mathbf [t_2 \dot [t_2 t_2">_2">mathbf_[t_2_\dot_[t_2.html" ;"title="_2.html" ;"title="mathbf [t_2">mathbf [t_2 \dot [t_2">_2.html" ;"title="mathbf [t_2">mathbf [t_2 \dot [t_2 t_2T - L [\mathbf [t_1], \dot [t_1], t_1] T \\ pt& + \int_^ \frac \left( - \frac \dot T + \frac \right) + \frac \left( - \frac ^2 T + \frac \dot - \frac \ddot T \right) \, dt. \end Notice that the Euler–Lagrange equations imply : \begin \frac \left( \frac \frac \dot T \right) & = \left( \frac \frac \right) \frac \dot T + \frac \left( \frac \frac \right) \dot T + \frac \frac \ddot \, T \\ pt& = \frac \frac \dot T + \frac \left( \frac \dot \right) \dot T + \frac \frac \ddot \, T. \end Substituting this into the previous equation, one gets : \begin 0 = \frac = & L mathbf_[t_2_\dot_[t_2.html"_;"title="_2.html"_;"title="mathbf_[t_2">mathbf_[t_2_\dot_[t_2">_2.html"_;"title="mathbf_[t_2">mathbf_[t_2_\dot_[t_2_t_2.html" ;"title="_2">mathbf_[t_2_\dot_[t_2.html" ;"title="_2.html" ;"title="mathbf [t_2">mathbf [t_2 \dot [t_2">_2.html" ;"title="mathbf [t_2">mathbf [t_2 \dot [t_2 t_2">_2">mathbf_[t_2_\dot_[t_2.html" ;"title="_2.html" ;"title="mathbf [t_2">mathbf [t_2 \dot [t_2">_2.html" ;"title="mathbf [t_2">mathbf [t_2 \dot [t_2 t_2T - L [\mathbf [t_1], \dot [t_1], t_1] T - \frac \frac \dot [t_2] T + \frac \frac \dot [t_1] T \\ pt& + \int_^ \frac \frac + \frac \frac \dot \, dt. \end Again using the Euler–Lagrange equations we get : \frac \left( \frac \frac \right) = \left( \frac \frac \right) \frac + \frac \frac \dot = \frac \frac + \frac \frac \dot. Substituting this into the previous equation, one gets : \begin 0 = & L mathbf_[t_2_\dot_[t_2.html"_;"title="_2.html"_;"title="mathbf_[t_2">mathbf_[t_2_\dot_[t_2">_2.html"_;"title="mathbf_[t_2">mathbf_[t_2_\dot_[t_2_t_2.html" ;"title="_2">mathbf_[t_2_\dot_[t_2.html" ;"title="_2.html" ;"title="mathbf [t_2">mathbf [t_2 \dot [t_2">_2.html" ;"title="mathbf [t_2">mathbf [t_2 \dot [t_2 t_2">_2">mathbf_[t_2_\dot_[t_2.html" ;"title="_2.html" ;"title="mathbf [t_2">mathbf [t_2 \dot [t_2">_2.html" ;"title="mathbf [t_2">mathbf [t_2 \dot [t_2 t_2T - L [\mathbf [t_1], \dot [t_1], t_1] T - \frac \frac \dot [t_2] T + \frac \frac \dot [t_1] T \\ pt& + \frac \frac [t_2] - \frac \frac [t_1]. \end From which one can see that :\left( \frac \frac \dot - L \right) T - \frac \frac is a constant of the motion, i.e., it is a conserved quantity. Since φ ''q, 0= q, we get \frac = 1 and so the conserved quantity simplifies to :\left( \frac \dot - L \right) T - \frac \frac. To avoid excessive complication of the formulas, this derivation assumed that the flow does not change as time passes. The same result can be obtained in the more general case.


Field-theoretic derivation

Noether's theorem may also be derived for tensor fields ''φ''''A'' where the index ''A'' ranges over the various components of the various tensor fields. These field quantities are functions defined over a four-dimensional space whose points are labeled by coordinates ''x''μ where the index ''μ'' ranges over time (''μ'' = 0) and three spatial dimensions (''μ'' = 1, 2, 3). These four coordinates are the independent variables; and the values of the fields at each event are the dependent variables. Under an infinitesimal transformation, the variation in the coordinates is written :x^\mu \rightarrow \xi^\mu = x^\mu + \delta x^\mu whereas the transformation of the field variables is expressed as :\varphi^A \rightarrow \alpha^A \left(\xi^\mu\right) = \varphi^A \left(x^\mu\right) + \delta \varphi^A \left(x^\mu\right)\,. By this definition, the field variations ''δφ''''A'' result from two factors: intrinsic changes in the field themselves and changes in coordinates, since the transformed field ''α''''A'' depends on the transformed coordinates ξμ. To isolate the intrinsic changes, the field variation at a single point ''x''μ may be defined :\alpha^A \left(x^\mu\right) = \varphi^A \left(x^\mu\right) + \bar \varphi^A \left(x^\mu\right)\,. If the coordinates are changed, the boundary of the region of space–time over which the Lagrangian is being integrated also changes; the original boundary and its transformed version are denoted as Ω and Ω’, respectively. Noether's theorem begins with the assumption that a specific transformation of the coordinates and field variables does not change the action, which is defined as the integral of the Lagrangian density over the given region of spacetime. Expressed mathematically, this assumption may be written as :\int_ L \left( \alpha^A, _, \xi^\mu \right) d^4\xi - \int_ L \left( \varphi^A, _, x^\mu \right) d^x = 0 where the comma subscript indicates a partial derivative with respect to the coordinate(s) that follows the comma, e.g. :_ = \frac\,. Since ξ is a dummy variable of integration, and since the change in the boundary Ω is infinitesimal by assumption, the two integrals may be combined using the four-dimensional version of the
divergence theorem In vector calculus, the divergence theorem, also known as Gauss's theorem or Ostrogradsky's theorem, reprinted in is a theorem which relates the '' flux'' of a vector field through a closed surface to the ''divergence'' of the field in the ...
into the following form : \int_\Omega \left\ d^4 x = 0 \,. The difference in Lagrangians can be written to first-order in the infinitesimal variations as : \left L \left( \alpha^A, _, x^\mu \right) - L \left( \varphi^A, _, x^\mu \right) \right= \frac \bar \varphi^A + \frac \bar _ \,. However, because the variations are defined at the same point as described above, the variation and the derivative can be done in reverse order; they
commute Commute, commutation or commutative may refer to: * Commuting, the process of travelling between a place of residence and a place of work Mathematics * Commutative property, a property of a mathematical operation whose result is insensitive to th ...
: \bar _ = \bar \frac = \frac \left(\bar \varphi^A\right) \,. Using the Euler–Lagrange field equations : \frac \left( \frac \right) = \frac the difference in Lagrangians can be written neatly as :\begin &\left L \left( \alpha^A, _, x^\mu \right) - L \left( \varphi^A, _, x^\mu \right) \right\\ pt = &\frac \left( \frac \right) \bar \varphi^A + \frac \bar _ = \frac \left( \frac \bar \varphi^A \right). \end Thus, the change in the action can be written as : \int_\Omega \frac \left\ d^x = 0 \,. Since this holds for any region Ω, the integrand must be zero : \frac \left\ = 0 \,. For any combination of the various
symmetry Symmetry (from grc, συμμετρία "agreement in dimensions, due proportion, arrangement") in everyday language refers to a sense of harmonious and beautiful proportion and balance. In mathematics, "symmetry" has a more precise definiti ...
transformations, the perturbation can be written :\begin \delta x^ &= \varepsilon X^\mu \\ \delta \varphi^A &= \varepsilon \Psi^A = \bar \varphi^A + \varepsilon \mathcal_X \varphi^A \end where \mathcal_X \varphi^A is the Lie derivative of φ''A'' in the ''X''''μ'' direction. When ''φ''''A'' is a scalar or _ = 0 , :\mathcal_X \varphi^A = \frac X^\mu\,. These equations imply that the field variation taken at one point equals :\bar \varphi^A = \varepsilon \Psi^A - \varepsilon \mathcal_X \varphi^A\,. Differentiating the above divergence with respect to ''ε'' at ''ε'' = 0 and changing the sign yields the conservation law :\frac j^\sigma = 0 where the conserved current equals : j^\sigma = \left frac \mathcal_X \varphi^A - L \, X^\sigma\right - \left(\frac \right) \Psi^A\,.


Manifold/fiber bundle derivation

Suppose we have an ''n''-dimensional oriented
Riemannian manifold In differential geometry, a Riemannian manifold or Riemannian space , so called after the German mathematician Bernhard Riemann, is a real, smooth manifold ''M'' equipped with a positive-definite inner product ''g'p'' on the tangent space ...
, ''M'' and a target manifold ''T''. Let \mathcal be the configuration space of
smooth function In mathematical analysis, the smoothness of a function is a property measured by the number of continuous derivatives it has over some domain, called ''differentiability class''. At the very minimum, a function could be considered smooth if ...
s from ''M'' to ''T''. (More generally, we can have smooth sections of a
fiber bundle In mathematics, and particularly topology, a fiber bundle (or, in Commonwealth English: fibre bundle) is a space that is a product space, but may have a different topological structure. Specifically, the similarity between a space E and a ...
over ''M''.) Examples of this ''M'' in physics include: * In
classical mechanics Classical mechanics is a physical theory describing the motion of macroscopic objects, from projectiles to parts of machinery, and astronomical objects, such as spacecraft, planets, stars, and galaxies. For objects governed by classi ...
, in the Hamiltonian formulation, ''M'' is the one-dimensional manifold \mathbb, representing time and the target space is the
cotangent bundle In mathematics, especially differential geometry, the cotangent bundle of a smooth manifold is the vector bundle of all the cotangent spaces at every point in the manifold. It may be described also as the dual bundle to the tangent bundle. Th ...
of
space Space is the boundless three-dimensional extent in which objects and events have relative position and direction. In classical physics, physical space is often conceived in three linear dimensions, although modern physicists usually consi ...
of generalized positions. * In field theory, ''M'' is the
spacetime In physics, spacetime is a mathematical model that combines the three dimensions of space and one dimension of time into a single four-dimensional manifold. Spacetime diagrams can be used to visualize relativistic effects, such as why differ ...
manifold and the target space is the set of values the fields can take at any given point. For example, if there are ''m'' real-valued
scalar field In mathematics and physics, a scalar field is a function associating a single number to every point in a space – possibly physical space. The scalar may either be a pure mathematical number ( dimensionless) or a scalar physical quantity ...
s, \varphi_1,\ldots,\varphi_m, then the target manifold is \mathbb^. If the field is a real vector field, then the target manifold is
isomorphic In mathematics, an isomorphism is a structure-preserving mapping between two structures of the same type that can be reversed by an inverse mapping. Two mathematical structures are isomorphic if an isomorphism exists between them. The word i ...
to \mathbb^. Now suppose there is a
functional Functional may refer to: * Movements in architecture: ** Functionalism (architecture) ** Form follows function * Functional group, combination of atoms within molecules * Medical conditions without currently visible organic basis: ** Functional sy ...
:\mathcal:\mathcal\rightarrow \mathbb, called the action. (It takes values into \mathbb, rather than \mathbb; this is for physical reasons, and is unimportant for this proof.) To get to the usual version of Noether's theorem, we need additional restrictions on the action. We assume \mathcal varphi/math> is the
integral In mathematics, an integral assigns numbers to functions in a way that describes displacement, area, volume, and other concepts that arise by combining infinitesimal data. The process of finding integrals is called integration. Along with ...
over ''M'' of a function :\mathcal(\varphi,\partial_\mu\varphi,x) called the
Lagrangian density Lagrangian may refer to: Mathematics * Lagrangian function, used to solve constrained minimization problems in optimization theory; see Lagrange multiplier ** Lagrangian relaxation, the method of approximating a difficult constrained problem with ...
, depending on ''φ'', its
derivative In mathematics, the derivative of a function of a real variable measures the sensitivity to change of the function value (output value) with respect to a change in its argument (input value). Derivatives are a fundamental tool of calculus. ...
and the position. In other words, for ''φ'' in \mathcal : \mathcal varphi,=\,\int_M \mathcal varphi(x),\partial_\mu\varphi(x),x\, d^x. Suppose we are given boundary conditions, i.e., a specification of the value of ''φ'' at the boundary if ''M'' is
compact Compact as used in politics may refer broadly to a pact or treaty; in more specific cases it may refer to: * Interstate compact * Blood compact, an ancient ritual of the Philippines * Compact government, a type of colonial rule utilized in Britis ...
, or some limit on ''φ'' as ''x'' approaches ∞. Then the subspace of \mathcal consisting of functions ''φ'' such that all
functional derivative In the calculus of variations, a field of mathematical analysis, the functional derivative (or variational derivative) relates a change in a functional (a functional in this sense is a function that acts on functions) to a change in a function on w ...
s of \mathcal at ''φ'' are zero, that is: :\frac\approx 0 and that ''φ'' satisfies the given boundary conditions, is the subspace of on shell solutions. (See
principle of stationary action The stationary-action principle – also known as the principle of least action – is a variational principle that, when applied to the ''action'' of a mechanical system, yields the equations of motion for that system. The principle states that ...
) Now, suppose we have an infinitesimal transformation on \mathcal, generated by a
functional Functional may refer to: * Movements in architecture: ** Functionalism (architecture) ** Form follows function * Functional group, combination of atoms within molecules * Medical conditions without currently visible organic basis: ** Functional sy ...
derivation Derivation may refer to: Language * Morphological derivation, a word-formation process * Parse tree or concrete syntax tree, representing a string's syntax in formal grammars Law * Derivative work, in copyright law * Derivation proceeding, a proc ...
, ''Q'' such that :Q \left \int_N \mathcal \, \mathrm^n x \right\approx \int_ f^\mu varphi(x),\partial\varphi,\partial\partial\varphi,\ldots\, ds_\mu for all compact submanifolds ''N'' or in other words, :Q mathcal(x)approx\partial_\mu f^\mu(x) for all ''x'', where we set :\mathcal(x)=\mathcal varphi(x), \partial_\mu \varphi(x),x If this holds on shell and
off shell In physics, particularly in quantum field theory, configurations of a physical system that satisfy classical equations of motion are called "on the mass shell" or simply more often on shell; while those that do not are called "off the mass shell ...
, we say ''Q'' generates an off-shell symmetry. If this only holds on shell, we say ''Q'' generates an on-shell symmetry. Then, we say ''Q'' is a generator of a one parameter
symmetry Symmetry (from grc, συμμετρία "agreement in dimensions, due proportion, arrangement") in everyday language refers to a sense of harmonious and beautiful proportion and balance. In mathematics, "symmetry" has a more precise definiti ...
Lie group In mathematics, a Lie group (pronounced ) is a group that is also a differentiable manifold. A manifold is a space that locally resembles Euclidean space, whereas groups define the abstract concept of a binary operation along with the addi ...
. Now, for any ''N'', because of the Euler–Lagrange theorem, on shell (and only on-shell), we have : \begin Q\left int_N \mathcal \, \mathrm^nx \right& =\int_N \left frac - \partial_\mu \frac \right varphi\, \mathrm^nx + \int_ \fracQ varphi\, \mathrms_\mu \\ & \approx\int_ f^\mu \, \mathrms_\mu. \end Since this is true for any ''N'', we have :\partial_\mu\left fracQ[\varphif^\mu\right.html" ;"title="varphi.html" ;"title="fracQ[\varphi">fracQ[\varphif^\mu\right">varphi.html" ;"title="fracQ[\varphi">fracQ[\varphif^\mu\rightapprox 0. But this is the
continuity equation A continuity equation or transport equation is an equation that describes the transport of some quantity. It is particularly simple and powerful when applied to a conserved quantity, but it can be generalized to apply to any extensive quantity. ...
for the current J^\mu defined by: :J^\mu\,=\,\fracQ varphif^\mu, which is called the Noether current associated with the
symmetry Symmetry (from grc, συμμετρία "agreement in dimensions, due proportion, arrangement") in everyday language refers to a sense of harmonious and beautiful proportion and balance. In mathematics, "symmetry" has a more precise definiti ...
. The continuity equation tells us that if we integrate this current over a
space-like In physics, spacetime is a mathematical model that combines the three dimensions of space and one dimension of time into a single four-dimensional manifold. Spacetime diagrams can be used to visualize relativistic effects, such as why dif ...
slice, we get a
conserved quantity In mathematics, a conserved quantity of a dynamical system is a function of the dependent variables, the value of which remains constant along each trajectory of the system. Not all systems have conserved quantities, and conserved quantities are ...
called the Noether charge (provided, of course, if ''M'' is noncompact, the currents fall off sufficiently fast at infinity).


Comments

Noether's theorem is an on shell theorem: it relies on use of the equations of motion—the classical path. It reflects the relation between the boundary conditions and the variational principle. Assuming no boundary terms in the action, Noether's theorem implies that : \int_ J^\mu ds_ \approx 0. The quantum analogs of Noether's theorem involving expectation values (e.g., \left\langle\int d^x~\partial \cdot \textbf \right\rangle = 0) probing
off shell In physics, particularly in quantum field theory, configurations of a physical system that satisfy classical equations of motion are called "on the mass shell" or simply more often on shell; while those that do not are called "off the mass shell ...
quantities as well are the Ward–Takahashi identities.


Generalization to Lie algebras

Suppose we have two symmetry derivations ''Q''1 and ''Q''2. Then, 'Q''1, ''Q''2is also a symmetry derivation. Let us see this explicitly. Let us say Q_1 mathcalapprox \partial_\mu f_1^\mu and Q_2 mathcalapprox \partial_\mu f_2^\mu Then, _1,Q_2\mathcal] = Q_1 _2[\mathcal-Q_2[Q_1[\mathcal.html" ;"title="mathcal.html" ;"title="_2[\mathcal">_2[\mathcal-Q_2[Q_1[\mathcal">mathcal.html" ;"title="_2[\mathcal">_2[\mathcal-Q_2[Q_1[\mathcal\approx\partial_\mu f_^\mu where ''f''12 = ''Q''1[''f''2''μ''] − ''Q''2[''f''1''μ'']. So, j_^\mu = \left(\frac \mathcal\right)(Q_1[Q_2[\varphi - Q_2[Q_1[\varphi)-f_^\mu. This shows we can extend Noether's theorem to larger Lie algebras in a natural way.


Generalization of the proof

This applies to ''any'' local symmetry derivation ''Q'' satisfying ''QS'' ≈ 0, and also to more general local functional differentiable actions, including ones where the Lagrangian depends on higher derivatives of the fields. Let ''ε'' be any arbitrary smooth function of the spacetime (or time) manifold such that the closure of its support is disjoint from the boundary. ''ε'' is a test function. Then, because of the variational principle (which does ''not'' apply to the boundary, by the way), the derivation distribution q generated by ''q'' 'ε''Φ(''x'')] = ''ε''(''x'')''Q'' �(''x'')satisfies ''q'' 'ε''''S''] ≈ 0 for every ''ε'', or more compactly, ''q''(''x'') 'S''nbsp;≈ 0 for all ''x'' not on the boundary (but remember that ''q''(''x'') is a shorthand for a derivation ''distribution'', not a derivation parametrized by ''x'' in general). This is the generalization of Noether's theorem. To see how the generalization is related to the version given above, assume that the action is the spacetime integral of a Lagrangian that only depends on φ and its first derivatives. Also, assume :Q mathcalapprox\partial_\mu f^\mu Then, : \begin q varepsilon\mathcal] & = \int q varepsilon\mathcal] d^ x \\ pt& = \int \left\ d^ x \\ pt& = \int \left\ \, d^ x \\ pt& \approx \int \varepsilon \partial_\mu \left\ \, d^ x \end for all \varepsilon. More generally, if the Lagrangian depends on higher derivatives, then : \partial_\mu\left _______f^\mu ____-__\left[\frac_\mathcal_\rightQ[\varphi.html" ;"title="frac_\mathcal_\right.html" ;"title=" f^\mu - \left[\frac \mathcal \right"> f^\mu - \left[\frac \mathcal \rightQ[\varphi">frac_\mathcal_\right.html" ;"title=" f^\mu - \left[\frac \mathcal \right"> f^\mu - \left[\frac \mathcal \rightQ[\varphi - 2\left[\frac \mathcal\right]\partial_\nu Q varphi + \partial_\nu\left[\left[\frac\mathcal\right] Q varphiright] - \,\dotsm \right] \approx 0.


Examples


Example 1: Conservation of energy

Looking at the specific case of a Newtonian particle of mass ''m'', coordinate ''x'', moving under the influence of a potential ''V'', coordinatized by time ''t''. The action, ''S'', is: :\begin \mathcal & = \int L\left (t),\dot(t)\right\, dt \\ & = \int \left(\frac m 2 \sum_^3\dot_i^2 - V(x(t))\right) \, dt. \end The first term in the brackets is the
kinetic energy In physics, the kinetic energy of an object is the energy that it possesses due to its motion. It is defined as the work needed to accelerate a body of a given mass from rest to its stated velocity. Having gained this energy during its acce ...
of the particle, while the second is its
potential energy In physics, potential energy is the energy held by an object because of its position relative to other objects, stresses within itself, its electric charge, or other factors. Common types of potential energy include the gravitational potenti ...
. Consider the generator of
time translation Time translation symmetry or temporal translation symmetry (TTS) is a mathematical transformation in physics that moves the times of events through a common interval. Time translation symmetry is the law that the laws of physics are unchanged ...
s ''Q'' = ''d''/''dt''. In other words, Q (t)= \dot(t). The coordinate ''x'' has an explicit dependence on time, whilst ''V'' does not; consequently: :Q = \frac\left frac\sum_i\dot_i^2 - V(x)\right= m \sum_i\dot_i\ddot_i - \sum_i\frac\dot_i so we can set :L = \frac \sum_i\dot_i^2 - V(x). Then, :\begin j & = \sum_^3\fracQ _i- L \\ & = m \sum_i\dot_i^2 - \left frac\sum_i\dot_i^2 - V(x)\right\\ pt & = \frac\sum_i\dot_i^2 + V(x). \end The right hand side is the energy, and Noether's theorem states that dj/dt = 0 (i.e. the principle of conservation of energy is a consequence of invariance under time translations). More generally, if the Lagrangian does not depend explicitly on time, the quantity :\sum_^3 \frac\dot - L (called the Hamiltonian) is conserved.


Example 2: Conservation of center of momentum

Still considering 1-dimensional time, let :\begin \mathcal\left vec\right & = \int \mathcal\left vec(t), \dot(t)\right dt \\ pt & = \int \left sum^N_ \frac\left(\dot_\alpha\right)^2 - \sum_ V_\left(\vec_\beta - \vec_\alpha\right)\rightdt, \end or N Newtonian particles where the potential only depends pairwise upon the relative displacement. For \vec, consider the generator of Galilean transformations (i.e. a change in the frame of reference). In other words, :Q_i\left ^j_\alpha(t)\right= t \delta^j_i. And :\begin Q_i mathcal & = \sum_\alpha m_\alpha \dot_\alpha^i - \sum_t \partial_i V_\left(\vec_\beta - \vec_\alpha\right) \\ & = \sum_\alpha m_\alpha \dot_\alpha^i. \end This has the form of \frac\sum_\alpha m_\alpha x^i_\alpha so we can set :\vec = \sum_\alpha m_\alpha \vec_\alpha. Then, :\begin \vec & = \sum_\alpha \left(\frac \mathcal\right)\cdot\vec\left vec_\alpha\right- \vec \\ pt & = \sum_\alpha \left(m_\alpha \dot_\alpha t - m_\alpha \vec_\alpha\right) \\ pt & = \vect - M\vec_ \end where \vec is the total momentum, ''M'' is the total mass and \vec_ is the center of mass. Noether's theorem states: :\frac = 0 \Rightarrow \vec - M \dot_ = 0.


Example 3: Conformal transformation

Both examples 1 and 2 are over a 1-dimensional manifold (time). An example involving spacetime is a conformal transformation of a massless real scalar field with a quartic potential in (3 + 1)-
Minkowski spacetime In mathematical physics, Minkowski space (or Minkowski spacetime) () is a combination of three-dimensional Euclidean space and time into a four-dimensional manifold where the spacetime interval between any two events is independent of the ...
. :\begin \mathcal varphi & = \int \mathcal\left varphi (x), \partial_\mu \varphi (x)\rightd^4 x \\ pt & = \int \left(\frac\partial^\mu \varphi \partial_\mu \varphi - \lambda \varphi^4\right) d^4 x \end For ''Q'', consider the generator of a spacetime rescaling. In other words, :Q
varphi(x) Phi (; uppercase Φ, lowercase φ or ϕ; grc, ϕεῖ ''pheî'' ; Modern Greek: ''fi'' ) is the 21st letter of the Greek alphabet. In Archaic and Classical Greek (c. 9th century BC to 4th century BC), it represented an aspirated voicel ...
= x^\mu\partial_\mu \varphi(x) + \varphi(x). The second term on the right hand side is due to the "conformal weight" of \varphi. And :Q mathcal= \partial^\mu\varphi\left(\partial_\mu\varphi + x^\nu\partial_\mu\partial_\nu\varphi + \partial_\mu\varphi\right) - 4\lambda\varphi^3\left(x^\mu\partial_\mu\varphi + \varphi\right). This has the form of :\partial_\mu\left fracx^\mu\partial^\nu\varphi\partial_\nu\varphi - \lambda x^\mu \varphi^4 \right= \partial_\mu\left(x^\mu\mathcal\right) (where we have performed a change of dummy indices) so set :f^\mu = x^\mu\mathcal. Then :\begin j^\mu & = \left frac\mathcal\right varphif^\mu \\ & = \partial^\mu\varphi\left(x^\nu\partial_\nu\varphi + \varphi\right) - x^\mu\left(\frac 1 2 \partial^\nu\varphi\partial_\nu\varphi - \lambda\varphi^4\right). \end Noether's theorem states that \partial_\mu j^\mu = 0 (as one may explicitly check by substituting the Euler–Lagrange equations into the left hand side). If one tries to find the Ward–Takahashi analog of this equation, one runs into a problem because of anomalies.


Applications

Application of Noether's theorem allows physicists to gain powerful insights into any general theory in physics, by just analyzing the various transformations that would make the form of the laws involved invariant. For example: * Invariance of an isolated system with respect to spatial
translation Translation is the communication of the meaning of a source-language text by means of an equivalent target-language text. The English language draws a terminological distinction (which does not exist in every language) between ''transla ...
(in other words, that the laws of physics are the same at all locations in space) gives the law of conservation of
linear momentum In Newtonian mechanics, momentum (more specifically linear momentum or translational momentum) is the product of the mass and velocity of an object. It is a vector quantity, possessing a magnitude and a direction. If is an object's mass a ...
(which states that the total linear momentum of an isolated system is constant) * Invariance of an isolated system with respect to
time Time is the continued sequence of existence and event (philosophy), events that occurs in an apparently irreversible process, irreversible succession from the past, through the present, into the future. It is a component quantity of various me ...
translation (i.e. that the laws of physics are the same at all points in time) gives the
law of conservation of energy In physics and chemistry, the law of conservation of energy states that the total energy of an isolated system remains constant; it is said to be ''conserved'' over time. This law, first proposed and tested by Émilie du Châtelet, means that ...
(which states that the total energy of an isolated system is constant) * Invariance of an isolated system with respect to
rotation Rotation, or spin, is the circular movement of an object around a '' central axis''. A two-dimensional rotating object has only one possible central axis and can rotate in either a clockwise or counterclockwise direction. A three-dimensional ...
(i.e., that the laws of physics are the same with respect to all angular orientations in space) gives the law of conservation of
angular momentum In physics, angular momentum (rarely, moment of momentum or rotational momentum) is the rotational analog of linear momentum. It is an important physical quantity because it is a conserved quantity—the total angular momentum of a closed syst ...
(which states that the total angular momentum of an isolated system is constant) * Invariance of an isolated system with respect to Lorentz boosts (i.e., that the laws of physics are the same with respect to all inertial reference frames) gives the center-of-mass theorem (which states that the center-of-mass of an isolated system moves at a constant velocity). In
quantum field theory In theoretical physics, quantum field theory (QFT) is a theoretical framework that combines classical field theory, special relativity, and quantum mechanics. QFT is used in particle physics to construct physical models of subatomic particles and ...
, the analog to Noether's theorem, the
Ward–Takahashi identity In quantum field theory, a Ward–Takahashi identity is an identity between correlation functions that follows from the global or gauge symmetries of the theory, and which remains valid after renormalization. The Ward–Takahashi identity of q ...
, yields further conservation laws, such as the conservation of
electric charge Electric charge is the physical property of matter that causes charged matter to experience a force when placed in an electromagnetic field. Electric charge can be ''positive'' or ''negative'' (commonly carried by protons and electrons res ...
from the invariance with respect to a change in the phase factor of the complex field of the charged particle and the associated
gauge Gauge ( or ) may refer to: Measurement * Gauge (instrument), any of a variety of measuring instruments * Gauge (firearms) * Wire gauge, a measure of the size of a wire ** American wire gauge, a common measure of nonferrous wire diameter, es ...
of the
electric potential The electric potential (also called the ''electric field potential'', potential drop, the electrostatic potential) is defined as the amount of work energy needed to move a unit of electric charge from a reference point to the specific point in ...
and
vector potential In vector calculus, a vector potential is a vector field whose curl is a given vector field. This is analogous to a ''scalar potential'', which is a scalar field whose gradient is a given vector field. Formally, given a vector field v, a ''vecto ...
. The Noether charge is also used in calculating the
entropy Entropy is a scientific concept, as well as a measurable physical property, that is most commonly associated with a state of disorder, randomness, or uncertainty. The term and the concept are used in diverse fields, from classical thermodyna ...
of stationary black holes.


See also

*
Conservation law In physics, a conservation law states that a particular measurable property of an isolated physical system does not change as the system evolves over time. Exact conservation laws include conservation of energy, conservation of linear momentum, c ...
*
Charge (physics) In physics, a charge is any of many different quantities, such as the electric charge in electromagnetism or the color charge in quantum chromodynamics. Charges correspond to the time-invariant generators of a symmetry group, and specifically ...
*
Gauge symmetry In physics, a gauge theory is a type of field theory in which the Lagrangian (and hence the dynamics of the system itself) does not change (is invariant) under local transformations according to certain smooth families of operations (Lie group ...
*
Gauge symmetry (mathematics) In mathematics, any Lagrangian system generally admits gauge symmetries, though it may happen that they are trivial. In theoretical physics, the notion of gauge symmetries depending on parameter functions is a cornerstone of contemporary field ...
*
Invariant (physics) In theoretical physics, an invariant is an observable of a physical system which remains unchanged under some transformation. Invariance, as a broader term, also applies to the no change of form of physical laws under a transformation, and is clos ...
*
Goldstone boson In particle and condensed matter physics, Goldstone bosons or Nambu–Goldstone bosons (NGBs) are bosons that appear necessarily in models exhibiting spontaneous breakdown of continuous symmetries. They were discovered by Yoichiro Nambu in part ...
* Symmetry in physics


Notes


References

* * *
Online copy
* * * *


External links

* :* (Original in ''Gott. Nachr.'' 1918:235–257) * * * * *

at MathPages. * * * * * Google Tech Talk, (June 16, 2010) {{YouTube, 1_MpQG2xXVo, ''Emmy Noether and The Fabric of Reality'' Articles containing proofs Calculus of variations Conservation laws Concepts in physics Partial differential equations Physics theorems Quantum field theory Symmetry Theoretical physics