NPIV or N_Port ID Virtualization is a

Fibre Channel Fibre Channel (FC) is a high-speed data transfer protocol providing in-order, lossless delivery of raw block data. Fibre Channel is primarily used to connect computer data storage to Server (computing), servers in storage area networks (SAN) in ...

feature whereby multiple Fibre Channel node port (N_Port) IDs can share a single physical N_Port. This allows multiple Fibre Channel initiators to occupy a single physical port, easing hardware requirements in Storage Area Network (SAN) design, especially where virtual SANs are called for. This allows each virtual server to see its own storage and no other virtual server's storage. NPIV is defined by the Technical Committee T11 in the Fibre Channel - Link Services (FC-LS) specification.

N_Port initialization with and without NPIV

Normally N_Port initialization proceeds like this: * N_Port sends FLOGI to address 0xFFFFFE to obtain a valid address * N_Port sends PLOGI to address 0xFFFFFC to register this address with the name server * N_Port sends SCR to address 0xFFFFFD to register for state change notifications However, with NPIV it may continue like this: * N_Port sends FDISC to address 0xFFFFFE to obtain an additional address * N_Port sends PLOGI to address 0xFFFFFC to register this additional address with the name server * N_Port sends SCR to address 0xFFFFFD to register for state change notifications. * ... (repeat FDISC/PLOGI/SCR for next address) FDISC is an abbreviation for Fabric Discovery, or "Discover Fabric Service Parameters", which is a misleading name in this context. It works just like FLOGI. N_Port is used to connect equipment ports to the fibre channel fabric (optical network) Source: https://www.hpe.com/h20195/v2/GetPDF.aspx/4AA4-4545ENW.pdf

Notes

Sources

* tp://ftp.t11.org/t11/pro/fc/ls/06-393v6.pdf Fibre Channel - Link Services* tp://ftp.t11.org/t11/member/fc/da/02-340v1.pdf NPIV Functionality Protocol{cbignore, bot=medic
T11 latest draft standards page
Fibre Channel