The Lockheed L-133 was an exotic design started in 1939 which was proposed to be the first jet fighter of the
United States Army Air Forces
The United States Army Air Forces (USAAF or AAF) was the major land-based aerial warfare service component of the United States Army and ''de facto'' aerial warfare service branch of the United States during and immediately after World War II ...
(USAAF) during
World War II
World War II or the Second World War, often abbreviated as WWII or WW2, was a world war that lasted from 1939 to 1945. It involved the World War II by country, vast majority of the world's countries—including all of the great power ...
. The radical design was to be powered by two axial-flow
turbojets
The turbojet is an airbreathing jet engine which is typically used in aircraft. It consists of a gas turbine with a propelling nozzle. The gas turbine has an air inlet which includes inlet guide vanes, a compressor, a combustion chamber, and ...
with an unusual blended wing-body canard design capable of 612 mph (985 km/h) in level flight. The USAAF rejected the 1942 proposal, but the effort speeded the development of the USAAF's first successful operational jet fighter, the
P-80 Shooting Star
The Lockheed P-80 Shooting Star was the first jet fighter used operationally by the United States Army Air Forces (USAAF) during World War II. Designed and built by Lockheed in 1943 and delivered just 143 days from the start of design, prod ...
, which did see limited service near the end of war. The P-80 was a less radical design with a single British-based Allison J33 engine, with a conventional tail, but it retained a wing which was the same shape as the outer wing sections of the P-38 Lightning.
Development
The
Lockheed aviation company was the first in the
United States
The United States of America (U.S.A. or USA), commonly known as the United States (U.S. or US) or America, is a country Continental United States, primarily located in North America. It consists of 50 U.S. state, states, a Washington, D.C., ...
to start work on a
jet-powered aircraft. The L-133 design started in 1939 as a number of "Paper Projects" by engineers
Clarence L. "Kelly" Johnson,
Willis M. Hawkins and
Hall L. Hibbard. By 1940 preliminary work on a company-financed
jet fighter
Fighter aircraft are fixed-wing military aircraft designed primarily for air-to-air combat. In military conflict, the role of fighter aircraft is to establish air superiority of the battlespace. Domination of the airspace above a battlefield ...
had been started, which progressed to several different versions on the drawing board. In the meantime, Lockheed was working on an axial-flow
L-1000 turbojet
The turbojet is an airbreathing jet engine which is typically used in aircraft. It consists of a gas turbine with a propelling nozzle. The gas turbine has an air inlet which includes inlet guide vanes, a compressor, a combustion chamber, a ...
engine of their own design, which was intended to power the culmination of the twin-engine jet fighter project, the Model L-133-02-01.
Throughout World War II, the development of a jet-powered fighter had the potential to bring a decisive advantage in the air battles of the war; as history played out, only Germany built significant numbers of jet fighters before the war ended, but they reached service in the Luftwaffe too late to make a difference.
On March 30, 1942, Lockheed formally submitted the L-133-02-01 to the USAAF for consideration.
[Norton 2008, p. 221] Powered by two L-1000 turbojets and featuring a futuristic-appearing
canard design with
slotted flaps to enhance lift, the single-seat fighter was expected to have a top speed of in level flight,
but a range of only
The L-133 had a main wing shape that was essentially identical to the outer wing sections of the Lockheed P-38 Lightning. In many respects the L-133 was far ahead of its time, with futuristic features including:
* canard layout;
* blended wing-body planform; and,
* two engines in a very low-drag integral fuselage location.
The USAAF considered the L-133 to be too advanced for the time, and did not pursue the project.
The experience gained with the design served Lockheed well in the development of the USAAF's first operational jet fighter, the
P-80 Shooting Star
The Lockheed P-80 Shooting Star was the first jet fighter used operationally by the United States Army Air Forces (USAAF) during World War II. Designed and built by Lockheed in 1943 and delivered just 143 days from the start of design, prod ...
. Although entering combat service after the war had ended, the P-80 was less advanced than the L-133. Because the USAAF didn't give the L-133 project the go-ahead, the advanced engines intended for the L-133 had long pauses in their development. The most expedient engine choice for the P-80 thus became the
Allison J33
The General Electric/Allison J33 is a development of the General Electric J31, enlarged to produce significantly greater thrust, starting at and ending at with an additional low-altitude boost to with water-alcohol injection.
Development
Th ...
, based on British centrifugal compressor designs. The P-80 was a cheap-to-build single-engine aircraft with a conventional wing and tailplane design, not using the blended wing-body and canard layout of the L-133.
Specifications (L-133-02-01)
See also
References
Notes
Bibliography
*
* Norton, Bill. ''U.S. Experimental & Prototype Aircraft Projects: Fighters 1939-1945''. North Branch, Minnesota: Specialty Press, 2008. .
External links
* http://www.fantastic-plastic.com/LockheedL-133Page.htm
https://www.youtube.com/watch?v=O3viiJ4g5G8
{{USAF fighters
L-0133
Cancelled military aircraft projects of the United States
Twinjets
Mid-wing aircraft
Canard aircraft
World War II jet aircraft of the United States