HOME

TheInfoList



Click Here for Items Related To - List of Intel Xeon processors (Broadwell-based)
OR:
List of Intel Xeon processors (Broadwell-based) on:   [Wikipedia]   [Google]   [Amazon]


" Broadwell-DE" (14 nm)

* All models support: '' MMX, SSE,
SSE2 SSE2 (Streaming SIMD Extensions 2) is one of the Intel SIMD (Single Instruction, Multiple Data) processor supplementary instruction sets introduced by Intel with the initial version of the Pentium 4 in 2000. SSE2 instructions allow the use of ...
,
SSE3 SSE3, Streaming SIMD Extensions 3, also known by its Intel code name Prescott New Instructions (PNI), is the third iteration of the SSE instruction set for the IA-32 (x86) architecture. Intel introduced SSE3 in early 2004 with the Prescott revis ...
,
SSSE3 Supplemental Streaming SIMD Extensions 3 (SSSE3 or SSE3S) is a SIMD instruction set created by Intel and is the fourth iteration of the SSE technology. History SSSE3 was first introduced with Intel processors based on the Core microarchitect ...
,
SSE4.1 SSE4 (Streaming SIMD Extensions 4) is a SIMD CPU instruction set used in the Intel Core (microarchitecture), Core microarchitecture and AMD K10, AMD K10 (K8L). It was announced on September 27, 2006, at the Fall 2006 Intel Developer Forum, with va ...
, SSE4.2, AVX,
F16C The F16C (previously/informally known as CVT16) instruction set is an x86 instruction set architecture extension which provides support for converting between half-precision and standard IEEE single-precision floating-point formats. History T ...
, Enhanced Intel
SpeedStep Enhanced SpeedStep is a series of dynamic frequency scaling technologies (codenamed Geyserville and including SpeedStep, SpeedStep II, and SpeedStep III) built into some Intel's microprocessors that allow the clock speed of the processor to be ...
Technology (EIST),
Intel 64 x86-64 (also known as x64, x86_64, AMD64, and Intel 64) is a 64-bit extension of the x86 instruction set. It was announced in 1999 and first available in the AMD Opteron family in 2003. It introduces two new operating modes: 64-bit mode an ...
, XD bit (an
NX bit The NX bit (no-execute bit) is a processor feature that separates areas of a virtual address space (the memory layout a program uses) into sections for storing data or program instructions. An operating system supporting the NX bit can mark certai ...
implementation), TXT,
Intel VT-x x86 virtualization is the use of hardware-assisted virtualization capabilities on an x86/x86-64 CPU. In the late 1990s x86 virtualization was achieved by complex software techniques, necessary to compensate for the processor's lack of hardware-a ...
, Intel EPT,
Intel VT-d x86 virtualization is the use of hardware-assisted virtualization capabilities on an x86/x86-64 CPU. In the late 1990s x86 virtualization was achieved by complex software techniques, necessary to compensate for the processor's lack of hardware-a ...
, Hyper-threading,
Turbo Boost Intel Turbo Boost is Intel's trade name for central processing units' (CPUs') dynamic frequency scaling feature that automatically raises certain versions of its operating frequency when demanding tasks are running, thus enabling a higher result ...
'' (except D-1518, D-1529), ''
AES-NI An Advanced Encryption Standard instruction set (AES instruction set) is a set of instructions that are specifically designed to perform AES encryption and decryption operations efficiently. These instructions are typically found in modern proces ...
, Smart Cache,
ECC memory Error correction code memory (ECC memory) is a type of computer data storage that uses an error correction code (ECC) to detect and correct ''n''-bit data corruption which occurs in memory. Typically, ECC memory maintains a memory system immun ...
.'' *
SoC SOC, SoC, Soc, may refer to: Science and technology * Information security operations center, in an organization, a centralized unit that deals with computer security issues * Selectable output control * Separation of concerns, a program design pr ...
peripherals include 8×
USB Universal Serial Bus (USB) is an industry standard, developed by USB Implementers Forum (USB-IF), for digital data transmission and power delivery between many types of electronics. It specifies the architecture, in particular the physical ...
(4× 2.0, 4× 3.0), 6×
SATA SATA (Serial AT Attachment) is a computer bus interface that connects host bus adapters to mass storage devices such as hard disk drives, optical drives, and solid-state drives. Serial ATA succeeded the earlier Parallel ATA (PATA) standard ...
, 2× Integrated 10 GbE
LAN Lan or LAN may refer to: Science and technology * Local asymptotic normality, a fundamental property of regular models in statistics * Longitude of the ascending node, one of the orbital elements used to specify the orbit of an object in space * ...
,
UART A universal asynchronous receiver-transmitter (UART ) is a peripheral device for asynchronous serial communication in which the data format and transmission speeds are configurable. It sends data bits one by one, from the least significant to ...
,
GPIO A general-purpose input/output (GPIO) is an uncommitted digital signal pin on an integrated circuit or electronic circuit (e.g. MCUs/ MPUs) board that can be used as an input or output, or both, and is controllable by software. GPIOs have no p ...
, and 32 lanes of
PCI Express PCI Express (Peripheral Component Interconnect Express), officially abbreviated as PCIe, is a high-speed standard used to connect hardware components inside computers. It is designed to replace older expansion bus standards such as Peripher ...
(8× 2.0, 24× 3.0), in ×16, ×8 and ×4 configurations. * Support for up to four
DIMM A DIMM (Dual In-line Memory Module) is a popular type of memory module used in computers. It is a printed circuit board with one or both sides (front and back) holding DRAM chips and pins. The vast majority of DIMMs are manufactured in compl ...
s of
DDR4 Double Data Rate 4 Synchronous Dynamic Random-Access Memory (DDR4 SDRAM) is a type of synchronous dynamic random-access memory with a high bandwidth ("double data rate") interface. Released to the market in 2014, it is a variant of dynamic rando ...
or
DDR3L Double Data Rate 3 Synchronous Dynamic Random-Access Memory (DDR3 SDRAM) is a type of synchronous dynamic random-access memory (SDRAM) with a high bandwidth ("double data rate") interface, and has been in use since 2007. It is the higher-speed ...
memory per CPU socket.


Xeon D-15xx (uniprocessor, SoC)


" Hewitt Lake" (14 nm)


Xeon D-16xx (uniprocessor, SoC)


" Broadwell-H" (14 nm)

* All models support: '' MMX, SSE,
SSE2 SSE2 (Streaming SIMD Extensions 2) is one of the Intel SIMD (Single Instruction, Multiple Data) processor supplementary instruction sets introduced by Intel with the initial version of the Pentium 4 in 2000. SSE2 instructions allow the use of ...
,
SSE3 SSE3, Streaming SIMD Extensions 3, also known by its Intel code name Prescott New Instructions (PNI), is the third iteration of the SSE instruction set for the IA-32 (x86) architecture. Intel introduced SSE3 in early 2004 with the Prescott revis ...
,
SSSE3 Supplemental Streaming SIMD Extensions 3 (SSSE3 or SSE3S) is a SIMD instruction set created by Intel and is the fourth iteration of the SSE technology. History SSSE3 was first introduced with Intel processors based on the Core microarchitect ...
,
SSE4.1 SSE4 (Streaming SIMD Extensions 4) is a SIMD CPU instruction set used in the Intel Core (microarchitecture), Core microarchitecture and AMD K10, AMD K10 (K8L). It was announced on September 27, 2006, at the Fall 2006 Intel Developer Forum, with va ...
, SSE4.2, AVX,
F16C The F16C (previously/informally known as CVT16) instruction set is an x86 instruction set architecture extension which provides support for converting between half-precision and standard IEEE single-precision floating-point formats. History T ...
, Enhanced Intel
SpeedStep Enhanced SpeedStep is a series of dynamic frequency scaling technologies (codenamed Geyserville and including SpeedStep, SpeedStep II, and SpeedStep III) built into some Intel's microprocessors that allow the clock speed of the processor to be ...
Technology (EIST),
Intel 64 x86-64 (also known as x64, x86_64, AMD64, and Intel 64) is a 64-bit extension of the x86 instruction set. It was announced in 1999 and first available in the AMD Opteron family in 2003. It introduces two new operating modes: 64-bit mode an ...
, XD bit (an
NX bit The NX bit (no-execute bit) is a processor feature that separates areas of a virtual address space (the memory layout a program uses) into sections for storing data or program instructions. An operating system supporting the NX bit can mark certai ...
implementation), TXT,
Intel VT-x x86 virtualization is the use of hardware-assisted virtualization capabilities on an x86/x86-64 CPU. In the late 1990s x86 virtualization was achieved by complex software techniques, necessary to compensate for the processor's lack of hardware-a ...
, Intel EPT,
Intel VT-d x86 virtualization is the use of hardware-assisted virtualization capabilities on an x86/x86-64 CPU. In the late 1990s x86 virtualization was achieved by complex software techniques, necessary to compensate for the processor's lack of hardware-a ...
, Hyper-threading,
Turbo Boost Intel Turbo Boost is Intel's trade name for central processing units' (CPUs') dynamic frequency scaling feature that automatically raises certain versions of its operating frequency when demanding tasks are running, thus enabling a higher result ...
,
AES-NI An Advanced Encryption Standard instruction set (AES instruction set) is a set of instructions that are specifically designed to perform AES encryption and decryption operations efficiently. These instructions are typically found in modern proces ...
, Smart Cache,
ECC memory Error correction code memory (ECC memory) is a type of computer data storage that uses an error correction code (ECC) to detect and correct ''n''-bit data corruption which occurs in memory. Typically, ECC memory maintains a memory system immun ...
.'' * Support for up to four
DIMM A DIMM (Dual In-line Memory Module) is a popular type of memory module used in computers. It is a printed circuit board with one or both sides (front and back) holding DRAM chips and pins. The vast majority of DIMMs are manufactured in compl ...
s of
DDR3L Double Data Rate 3 Synchronous Dynamic Random-Access Memory (DDR3 SDRAM) is a type of synchronous dynamic random-access memory (SDRAM) with a high bandwidth ("double data rate") interface, and has been in use since 2007. It is the higher-speed ...
memory per CPU socket.


Xeon E3-12xx v4 (uniprocessor)


" Broadwell-EP" (14 nm)

* All models support: '' MMX, SSE,
SSE2 SSE2 (Streaming SIMD Extensions 2) is one of the Intel SIMD (Single Instruction, Multiple Data) processor supplementary instruction sets introduced by Intel with the initial version of the Pentium 4 in 2000. SSE2 instructions allow the use of ...
,
SSE3 SSE3, Streaming SIMD Extensions 3, also known by its Intel code name Prescott New Instructions (PNI), is the third iteration of the SSE instruction set for the IA-32 (x86) architecture. Intel introduced SSE3 in early 2004 with the Prescott revis ...
,
SSSE3 Supplemental Streaming SIMD Extensions 3 (SSSE3 or SSE3S) is a SIMD instruction set created by Intel and is the fourth iteration of the SSE technology. History SSSE3 was first introduced with Intel processors based on the Core microarchitect ...
,
SSE4.1 SSE4 (Streaming SIMD Extensions 4) is a SIMD CPU instruction set used in the Intel Core (microarchitecture), Core microarchitecture and AMD K10, AMD K10 (K8L). It was announced on September 27, 2006, at the Fall 2006 Intel Developer Forum, with va ...
, SSE4.2, AVX,
AVX2 Advanced Vector Extensions (AVX, also known as Gesher New Instructions and then Sandy Bridge New Instructions) are SIMD extensions to the x86 instruction set architecture for microprocessors from Intel and Advanced Micro Devices (AMD). They w ...
,
FMA3 The FMA instruction set is an extension to the 128- and 256-bit Streaming SIMD Extensions instructions in the x86 microprocessor instruction set to perform fused multiply–add (FMA) operations. There are two variants: * FMA4 is supported in AM ...
,
F16C The F16C (previously/informally known as CVT16) instruction set is an x86 instruction set architecture extension which provides support for converting between half-precision and standard IEEE single-precision floating-point formats. History T ...
, Enhanced Intel
SpeedStep Enhanced SpeedStep is a series of dynamic frequency scaling technologies (codenamed Geyserville and including SpeedStep, SpeedStep II, and SpeedStep III) built into some Intel's microprocessors that allow the clock speed of the processor to be ...
Technology (EIST),
Intel 64 x86-64 (also known as x64, x86_64, AMD64, and Intel 64) is a 64-bit extension of the x86 instruction set. It was announced in 1999 and first available in the AMD Opteron family in 2003. It introduces two new operating modes: 64-bit mode an ...
, XD bit (an
NX bit The NX bit (no-execute bit) is a processor feature that separates areas of a virtual address space (the memory layout a program uses) into sections for storing data or program instructions. An operating system supporting the NX bit can mark certai ...
implementation),
Intel VT-x x86 virtualization is the use of hardware-assisted virtualization capabilities on an x86/x86-64 CPU. In the late 1990s x86 virtualization was achieved by complex software techniques, necessary to compensate for the processor's lack of hardware-a ...
,
Intel VT-d x86 virtualization is the use of hardware-assisted virtualization capabilities on an x86/x86-64 CPU. In the late 1990s x86 virtualization was achieved by complex software techniques, necessary to compensate for the processor's lack of hardware-a ...
, Hyper-threading (except E5-2603v4, 2609v4 and 4627v4),
Turbo Boost Intel Turbo Boost is Intel's trade name for central processing units' (CPUs') dynamic frequency scaling feature that automatically raises certain versions of its operating frequency when demanding tasks are running, thus enabling a higher result ...
2.0 (except E5-1603v4, 1607v4, 2603v4, 2609v4 and 4610v4),
AES-NI An Advanced Encryption Standard instruction set (AES instruction set) is a set of instructions that are specifically designed to perform AES encryption and decryption operations efficiently. These instructions are typically found in modern proces ...
,
Smart Cache A CPU cache is a hardware cache used by the central processing unit (CPU) of a computer to reduce the average cost (time or energy) to access data from the main memory. A cache is a smaller, faster memory, located closer to a processor core, which ...
.'' * Transistors: Up to 10 cores: 3.20 billion, Up to 15 cores: 4.70 billion, Up to 24 cores: 7.20 billion * Die size: Up to 10 cores: 246 mm2, Up to 15 cores: 306 mm2, Up to 24 cores: 456 mm2 * Support for up to twelve
DIMM A DIMM (Dual In-line Memory Module) is a popular type of memory module used in computers. It is a printed circuit board with one or both sides (front and back) holding DRAM chips and pins. The vast majority of DIMMs are manufactured in compl ...
s of
DDR4 Double Data Rate 4 Synchronous Dynamic Random-Access Memory (DDR4 SDRAM) is a type of synchronous dynamic random-access memory with a high bandwidth ("double data rate") interface. Released to the market in 2014, it is a variant of dynamic rando ...
memory per CPU socket.


Xeon E5-16xx v4 (uniprocessor)


Xeon E5-26xx v4 (dual-processor)


Xeon E5-46xx v4 (quad-processor)


" Broadwell-EX" (14 nm)

* All models support: '' MMX, SSE,
SSE2 SSE2 (Streaming SIMD Extensions 2) is one of the Intel SIMD (Single Instruction, Multiple Data) processor supplementary instruction sets introduced by Intel with the initial version of the Pentium 4 in 2000. SSE2 instructions allow the use of ...
,
SSE3 SSE3, Streaming SIMD Extensions 3, also known by its Intel code name Prescott New Instructions (PNI), is the third iteration of the SSE instruction set for the IA-32 (x86) architecture. Intel introduced SSE3 in early 2004 with the Prescott revis ...
,
SSSE3 Supplemental Streaming SIMD Extensions 3 (SSSE3 or SSE3S) is a SIMD instruction set created by Intel and is the fourth iteration of the SSE technology. History SSSE3 was first introduced with Intel processors based on the Core microarchitect ...
,
SSE4.1 SSE4 (Streaming SIMD Extensions 4) is a SIMD CPU instruction set used in the Intel Core (microarchitecture), Core microarchitecture and AMD K10, AMD K10 (K8L). It was announced on September 27, 2006, at the Fall 2006 Intel Developer Forum, with va ...
, SSE4.2, AVX,
AVX2 Advanced Vector Extensions (AVX, also known as Gesher New Instructions and then Sandy Bridge New Instructions) are SIMD extensions to the x86 instruction set architecture for microprocessors from Intel and Advanced Micro Devices (AMD). They w ...
,
FMA3 The FMA instruction set is an extension to the 128- and 256-bit Streaming SIMD Extensions instructions in the x86 microprocessor instruction set to perform fused multiply–add (FMA) operations. There are two variants: * FMA4 is supported in AM ...
,
F16C The F16C (previously/informally known as CVT16) instruction set is an x86 instruction set architecture extension which provides support for converting between half-precision and standard IEEE single-precision floating-point formats. History T ...
, Enhanced Intel
SpeedStep Enhanced SpeedStep is a series of dynamic frequency scaling technologies (codenamed Geyserville and including SpeedStep, SpeedStep II, and SpeedStep III) built into some Intel's microprocessors that allow the clock speed of the processor to be ...
Technology (EIST),
Intel 64 x86-64 (also known as x64, x86_64, AMD64, and Intel 64) is a 64-bit extension of the x86 instruction set. It was announced in 1999 and first available in the AMD Opteron family in 2003. It introduces two new operating modes: 64-bit mode an ...
, XD bit (an
NX bit The NX bit (no-execute bit) is a processor feature that separates areas of a virtual address space (the memory layout a program uses) into sections for storing data or program instructions. An operating system supporting the NX bit can mark certai ...
implementation),
Intel VT-x x86 virtualization is the use of hardware-assisted virtualization capabilities on an x86/x86-64 CPU. In the late 1990s x86 virtualization was achieved by complex software techniques, necessary to compensate for the processor's lack of hardware-a ...
,
Intel VT-d x86 virtualization is the use of hardware-assisted virtualization capabilities on an x86/x86-64 CPU. In the late 1990s x86 virtualization was achieved by complex software techniques, necessary to compensate for the processor's lack of hardware-a ...
, Hyper-threading,
Turbo Boost Intel Turbo Boost is Intel's trade name for central processing units' (CPUs') dynamic frequency scaling feature that automatically raises certain versions of its operating frequency when demanding tasks are running, thus enabling a higher result ...
2.0,
AES-NI An Advanced Encryption Standard instruction set (AES instruction set) is a set of instructions that are specifically designed to perform AES encryption and decryption operations efficiently. These instructions are typically found in modern proces ...
,
Smart Cache A CPU cache is a hardware cache used by the central processing unit (CPU) of a computer to reduce the average cost (time or energy) to access data from the main memory. A cache is a smaller, faster memory, located closer to a processor core, which ...
.'' * Support for up to 12
DIMM A DIMM (Dual In-line Memory Module) is a popular type of memory module used in computers. It is a printed circuit board with one or both sides (front and back) holding DRAM chips and pins. The vast majority of DIMMs are manufactured in compl ...
s of
DDR4 Double Data Rate 4 Synchronous Dynamic Random-Access Memory (DDR4 SDRAM) is a type of synchronous dynamic random-access memory with a high bandwidth ("double data rate") interface. Released to the market in 2014, it is a variant of dynamic rando ...
memory per CPU socket.


Xeon E7-48xx v4 (quad-processor)


Xeon E7-88xx v4 (octa-processor)


References

{{Intel processors, * Intel Xeon (Broadwell)