ISO 14971

ISO 14971 ''Medical devices — Application of risk management to medical devices'' is a voluntary standard for the application of risk management to medical devices. "Voluntary standards do not replace national laws, with which standards' users are understood to comply and which take precedence" over voluntary standards such as ISO 13485 and ISO 14971.
The ISO Technical Committee responsible for the maintenance of this standard is ISO/ TC 210 working with IEC/SC62A through Joint Working Group one (JWG1). This standard is the culmination of the work starting in ISO/IEC Guide 51, and ISO/IEC Guide 63. The third edition of ISO 14971 was published in December 2019 and supersedes the second edition of ISO 14971.

Specifically, ISO 14971 is a nine-part standard which first establishes a framework for risk analysis, evaluation, control, and review, and also specifies a procedure for review and monitoring during production and post-production.

ISO 14971:2012 was harmonized with respect to the three European Directives associated with medical devices through the three 'Zed' Annexes (ZA, ZB & ZC). The Annex ZA harmonized ISO 14971:2012 with the Medical Devices Directive 93/42/EEC of 1993. The Annex ZB harmonized ISO 14971:2012 with the Active Implantable Medical Device Directive 90/385/EEC of 1990. The Annex ZC harmonized ISO 14971:2012 with the In-vitro Diagnostic Medical Device Directive 98/79/EC of 1998.

The 2021 addendum to ISO 14971 (ISO 14971:2019+A11:2021) was published to harmonize ISO 14971 and two European Regulations associated with medical devices through the two 'Zed' Annexes (ZA & ZB). The Annex ZA harmonized ISO 14971 with the European Union's Medical Device Regulation (2017/745) of 2017. The Annex ZB harmonized ISO 14971 with the European Union's Medical Device Regulation (2017/746) of 2017.

In 2013, a technical report ISO/TR 24971 was published by ISO TC 210 to provide expert guidance on the application of this standard. The second edition of ISO 24971 was published in 2020 and contains some of the informative annexes from the second edition of ISO 14971.

ISO 14971 risk management options

Inherent safety by design

For example:
* Use specific connectors that cannot be connected to the wrong component.
* Remove features that can be mistakenly selected or eliminate an interaction when it could lead to use error.
* Improve the detectability or readability of controls, labels, and displays.
* Automate device functions that are prone to use error when users perform the task manually.

Protective measures in the medical device itself or in the manufacturing process

For example:
* Incorporate safety mechanisms such as physical safety guards, shielded elements, or software or hardware interlocks.
* Include warning screens to advise the user of essential conditions that should exist prior to proceeding with device use, such as specific data entry.
* Use alerts for hazardous conditions, such as a “low battery” alert when an unexpected loss of the device’s operation could cause harm or death.
* Use device technologies that require less maintenance or are “maintenance free.”

Information for safety

For example:
* Provide written information, such as warning or caution statements in the user manual that highlight and clearly discuss the use-related hazard.
* Train users to avoid the use error.

Changes in the ISO 14971:2019 edition

The third edition of the standard from 2019 differs from 14971:2007 not only by a new chapter structure, but also by focus on the benefit-risk ratio. For this, the concept of (medical) benefit is now defined. In addition, there is a stronger focus on the "information from the production and the downstream phases". Some explanations or appendices from the previous edition are outsourced in ISO / TR 24971:2019.

History

See also

* List of ISO standards
* ISO 13485
* Medical technology
* Medical device
* Medical Devices Directive
* Clinical Engineering
* ISO 690

References

External links

ISO 13485
��Medical devices—Quality management systems—Requirements for regulatory purposes


��Quality management and corresponding general aspects for medical devices

{{ISO standards

#14971
Regulation of medical devices
Medical technology