25 Gigabit Ethernet and 50 Gigabit Ethernet are standards for
Ethernet
Ethernet ( ) is a family of wired computer networking technologies commonly used in local area networks (LAN), metropolitan area networks (MAN) and wide area networks (WAN). It was commercially introduced in 1980 and first standardized in 198 ...
connectivity in a
datacenter
A data center is a building, a dedicated space within a building, or a group of buildings used to house computer systems and associated components, such as telecommunications and storage systems.
Since IT operations are crucial for business ...
environment, developed by
IEEE 802.3
IEEE 802.3 is a working group and a collection of standards defining the physical layer and data link layer's media access control (MAC) of wired Ethernet. The standards are produced by the working group of the Institute of Electrical and Electro ...
task forces
and
and are available from multiple vendors.
History
An industry consortium, 25G Ethernet Consortium, was formed by Arista, Broadcom, Google, Mellanox Technologies and Microsoft in July 2014 to support the specification of single-lane 25-Gbit/s Ethernet and dual-lane 50-Gbit/s Ethernet technology. The ''25G Ethernet Consortium'' specification draft was completed in September 2015 and uses technology from IEEE Std. 802.3ba and IEEE Std. 802.3bj.
In November 2014, an IEEE 802.3 task force was formed to develop a single-lane 25-Gbit/s standard,
and in November 2015, a study group was formed to explore the development of a single-lane 50-Gbit/s standard.
In May 2016, an IEEE 802.3 task force was formed to develop a single-lane 50 Gigabit Ethernet standard.
On June 30, 2016, the IEEE 802.3by standard was approved by The IEEE-SA Standards Board.
On November 12, 2018, the IEEE P802.3cn Task Force started working to define PHY supporting 50-Gbit/s operation over at least 40 km of SMF.
The IEEE 802.3cd standard was approved on December 5, 2018.
On December 20, 2019, the IEEE 802.3cn standard was published.
On April 6, 2020, ''25 Gigabit Ethernet Consortium'' has rebranded to Ethernet Technology Consortium, and it announces 800 Gigabit Ethernet (GbE) specification.
On June 4, 2020, the IEEE approved IEEE 802.3ca which allows for symmetric or asymmetric operation with downstream speeds of 25 or , and upstream speeds of 10, 25, or over passive optical network
A passive optical network (PON) is a fiber-optic telecommunications network that uses only ''unpowered'' devices to carry signals, as opposed to electronic equipment. In practice, PONs are typically used for the '' last mile'' between Internet ...
s.
25 Gigabit Ethernet
The IEEE 802.3
IEEE 802.3 is a working group and a collection of standards defining the physical layer and data link layer's media access control (MAC) of wired Ethernet. The standards are produced by the working group of the Institute of Electrical and Electro ...
by standard uses technology defined for 100 Gigabit Ethernet
40 Gigabit Ethernet (40GbE) and 100 Gigabit Ethernet (100GbE) are groups of computer networking technologies for transmitting Ethernet frames at rates of 40 and 100 gigabits per second (Gbit/s), respectively. These technologies offer significantly ...
implemented as four 25-Gbit/s lanes (IEEE 802.3bj). The IEEE 802.3by standard defines several single-lane variations.
;
: 25GBASE-T, a 25-Gbit/s standard over twisted pair, was approved alongside 40GBASE-T
40 Gigabit Ethernet (40GbE) and 100 Gigabit Ethernet (100GbE) are groups of computer networking technologies for transmitting Ethernet frames at rates of 40 and 100 gigabits per second (Gbit/s), respectively. These technologies offer significantl ...
within IEEE 802.3
IEEE 802.3 is a working group and a collection of standards defining the physical layer and data link layer's media access control (MAC) of wired Ethernet. The standards are produced by the working group of the Institute of Electrical and Electro ...
bq.
Forward Error Correction
All fibre and twisted pair versions of 25 Gigabit Ethernet are required to support Reed-Solomon Forward Error Correction, often abbreviated RS-FEC, defined in clause 108 of the IEEE 802.3 standard. This also applies to 25GBASE-CR but not to 25GBASE-CR-S, both of which are variants used in DAC cables. 25GBASE-CR as well as 25GBASE-CR-S are required to support Fire-Code FEC (BASE-R FEC, also FC-FEC, defined in clause 74 of IEEE 802.3). While RS-FEC has to be supported for the mentioned 25 G versions, clause 108 also mandates that it has to be possible to turn FEC off, which makes it possible to not use FEC if desired.
For an Ethernet link to form, the interfaces involved must use the same type of FEC or no FEC.[https://cdrdv2-public.intel.com/630739/630739_25%20Gb%20Intel%C2%AE%20Ethernet%20Media%20Guide%20Application%20Note.pdf]
50 Gigabit Ethernet
The IEEE standard defines a Physical Coding Sublayer (PCS) in Clause 133 which after encoding gives a data rate Data rate and data transfer rate can refer to several related and overlapping concepts in communications networks:
Achieved rate
* Bit rate, the number of bits that are conveyed or processed per unit of time
** Data signaling rate or gross bit rate ...
of . 802.3cd also defines an RS-FEC for forward error correction in Clause 134 which after FEC encoding gives a data rate of . It is not possible to transmit over an electrical interface while maintaining suitable signal integrity so four-level pulse-amplitude modulation
Pulse-amplitude modulation (PAM) is a form of signal modulation in which the message information is encoded in the amplitude of a pulse train interrupting the carrier frequency. Demodulation is performed by detecting the amplitude level of th ...
(PAM4) is used to map pairs of bits into a single symbol. This leads to an overall baud rate of 26.5625 GBd for per lane Ethernet. PAM4 encoding for 50G Ethernet is defined in Clause 135 of the 802.3 standard.
Availability
, 25 Gigabit Ethernet equipment is available on the market using the SFP28
Small Form-factor Pluggable connected to a pair of fiber-optic cables
Small Form-factor Pluggable (SFP) is a compact, hot-pluggable network interface module format used for both telecommunication and data communications applications. An SFP ...
and QSFP28 transceiver form factors. Direct attach SFP28-to-SFP28 copper cables in 1-, 2-, 3- and 5-meter lengths are available from several manufacturers, and optical transceiver manufacturers have announced 1310 nm "LR" optics intended for reach distances of 2 to 10 km over two strands of standard single-mode fiber
In fiber-optic communication, a single-mode optical fiber, also known as fundamental- or mono-mode, is an optical fiber designed to carry only a single mode of light - the transverse mode. Modes are the possible solutions of the Helmholtz equ ...
, similar to existing 10GBASE-LR optics, as well as 850 nm "SR" optics intended for short reach distances of 100 m over two strands of OM4 multimode fiber
Multi-mode optical fiber is a type of optical fiber mostly used for communication over short distances, such as within a building or on a campus. Multi-mode links can be used for data rates up to 800 Gbit/s. Multi-mode fiber has a fairly # ...
, similar to existing 10GBASE-SR optics.
See also
* Ethernet Alliance
The Ethernet Alliance is an industry consortium founded in 2005 to promote and support Ethernet.
Organization
The Ethernet Alliance work groups are called subcommittees. These subcommittees are focused on efforts around specific standards-based ...
References
External links
Ethernet Technology Consortium
Ultra Ethernet Consortium
*
{{Ethernet
Ethernet