Heterogeneous combustion, otherwise known as combustion in porous media, is a type of

combustion Combustion, or burning, is a high-temperature exothermic redox chemical reaction between a fuel (the reductant) and an oxidant, usually atmospheric oxygen, that produces oxidized, often gaseous products, in a mixture termed as smoke. Combus ...

in which a solid and gas phase interact to promote the complete transfer of reactants to their lower energy potential products. In this type of combustion a high surface area solid is immersed into a gaseous reacting flow, additional fluid phases may or may not be present. Chemical reactions and heat transfer occur locally on each phase and between both phases. Heterogeneous Combustion differs from

catalysis Catalysis () is the process of increasing the rate of a chemical reaction by adding a substance known as a catalyst (). Catalysts are not consumed in the reaction and remain unchanged after it. If the reaction is rapid and the catalyst recyc ...

as there is no focus to either phase individually but rather both examined simultaneously. In some materials, such as

silicon carbide Silicon carbide (SiC), also known as carborundum (), is a hard chemical compound containing silicon and carbon. A semiconductor, it occurs in nature as the extremely rare mineral moissanite, but has been mass-produced as a powder and crystal s ...

(SiC), oxide layers, SiO and SiO₂, which form on the surface enable the adsorption of water vapor from the gas phase onto the solid lowering partial pressures. In this regime of combustion, thermal heat released from the combustion byproducts are transferred into the solid phase by

convection Convection is single or multiphase fluid flow that occurs spontaneously due to the combined effects of material property heterogeneity and body forces on a fluid, most commonly density and gravity (see buoyancy). When the cause of the c ...

; conduction and radiation both then conduct heat upstream (along with adverse convection within the gas phase). Heat is then convectively transferred to the unburnt reactants.

Applications

Within the literature, there many applications of heterogeneous combustion which are derived from the unique manner in which this combustion process recirculates heat. These devices may be utilized as either stand alone devices, or in conjunction with other means of energy conversion for highly efficient

combined heat and power Cogeneration or combined heat and power (CHP) is the use of a heat engine or power station to generate electricity and useful heat at the same time. Cogeneration is a more efficient use of fuel or heat, because otherwise- wasted heat from elect ...

(CHP) applications. For example, electricity production via both radiative and convective heat exchange with the combustion chamber can be accomplished using Organic Rankine Cycles in a multi step heating process,/> or using strictly radiative emissions via

photovoltaic Photovoltaics (PV) is the conversion of light into electricity using semiconducting materials that exhibit the photovoltaic effect, a phenomenon studied in physics, photochemistry, and electrochemistry. The photovoltaic effect is commercially ...

and

thermionic Thermionic emission is the liberation of electrons from an electrode by virtue of its temperature (releasing of energy supplied by heat). This occurs because the thermal energy given to the charge carrier overcomes the work function of the mater ...

generators./> Heterogeneous combustors may be utilized for small-scale heating purposes, and as oxidizers of

volatile organic compounds Volatile organic compounds (VOCs) are organic compounds that have a high vapour pressure at room temperature. High vapor pressure correlates with a low boiling point, which relates to the number of the sample's molecules in the surrounding air, a t ...

(VOCs). Heterogeneous combustion may also be combined in series and parallel with multiple injection stages for use in gas flares at chemical manufacturing plants or oil wells./>

Flame structure

Within a combustion chamber containing porous media, structure of the environment can be assumed as follows. A preheating region exists prior to the surface of the flame front denoted by δ_p. Preheating length is marked by the beginning of the porous solid where appreciable heat transfer to the gas phase occurs and ends when the solid and gas phase reach equilibrium temperature. The region of chemical heat release, the flame, whose thickness can be given as δ_L, exists following the preheat region and its length is dependent upon mass flux, surface properties, and equivalence ratio. Beyond the flame, where minimal chemical heat release occurs, heat is convectively transferred from the post combustion gases into the solid. Heat then conducts and radiates through the solid structure upstream through the flame. Within the preheating region, heat is again convectively transferred from the solid structure to the gas. The flame structure inside the porous matrix has been imaged by using X-ray absorption. To evaluate the temperature within the gas phase, the reacting mixture was diluted with Krypton: an inert gas that has a large X-ray absorption coefficient.

References

{{Reflist Combustion