Hot Work

__NOTOC__

Hot work refers to operations which can produce a flame or spark. Common hot work processes involve welding, soldering, cutting, brazing and the use of powder-actuated tools or similar fire producing operations. These processes produce sparks which can ignite flammable materials around the work area or flammable gases and vapors in the workspace.

Types of Hot Work

Welding

The process of joining two pieces of metal or plastic together through an electrode. Several forms of welding exist, including:

* Shielded Metal Arc Welding (SMAW) or Stick Welding
* Gas Metal Arc Welding (GMAW) or Magnesium Inert Gas Welding (MIG)
* Flux-Cored Arc Welding (FCAW)
* Gas Tungsten Arc Welding (GTAW) or Tungsten Inert Gas Welding (TIG)
* Submerged Arc Welding (SAW)

Welding temperatures vary depending on the type of electrode, but is typically higher than soldering.

Soldering

Soldering is the same type of joining process as welding but uses different filler material called solder and operates at under 450 degrees Celsius. Soldering is commonly used in circuit boards and copper pipes in plumbing.

Brazing

Brazing is used in applications to join close fitting members in the range of 0.001 to 0.005 inches. Brazing operations are conducted at temperatures above 450 degrees Celsius.

Cutting

Cutting processes that produce sparks fall under the category of hot work. Examples include sparks produced from saw cutting and grinding.

Safety

The hazards presented with hot work vary greatly, depending on the type of hot work used, the space and surroundings that the work is performed, and how to evaluate the best solution for the hazards present. While nearly every job involving hot work is unique in some way, there are some general steps that can be taken to help mitigate risk:

* Evaluate the workplace for potential hazards before performing the work
* Consider moving the workplace to a safer location if possible or removing hazardous materials
* In areas where there is particularly high danger, utilize a fire watch

* Ensure everyone in the area is aware of the hazards present and where they are
* After finishing work, keep a watch as the work piece cools to ensure nothing ignites

Personal Protective Equipment (PPE) is also an important part of safety in hot work. Many worksites cannot have the hazards eliminated or utilize components of the hierarchy of controls. Therefore, it is important for employers to emphasize the importance of PPE and for workers to utilize PPE in these conditions to mitigate risk wherever possible.

Fire Watch

When performing hot work, welders must assess the risk of fire in the work area and implement certain safety precautions if a threat is detected. The establishment of a fire watch is the most important precaution a welder can take against an accidental fire on a job site. Either the welder himself or an appointed laborer must become designated for a fire watch and stay in the area of the hot work for no less than 2 hours after the last of the hot work has been completed. This designated fire watch person must have a fire extinguisher and access to phone in case of a fire.

Hot Work Permit

In some countries, such as the UK and Canada, a ''hot work permit'' is required for hot work.. The purpose of a hot work permit is to effect "the employer's written authorization to perform hot working operations". The UK's Health and Safety Executive suggests that a hot work permit should specify:
*what work will be done;
*how and when it is to be done;
*what safety and health precautions are needed;
*who is responsible for checking it is safe for the work to start;
*who will check that the work is done safely;
*who is responsible for confirming that work is complete and there is no longer a risk from, or to, the people doing the work.

Confined Spaces

Confined spaces present a unique challenge with hot work for several reasons. Hot work performed in storage tanks, pipelines, and sewers present a risk of explosion due to the presence of flammable gasses. Physical and chemical hazards in confined spaces are:

* Limited access points make entering and exiting difficult
* Poor ventilation and limited airflow can lead to the buildup of toxic and flammable gasses
* Gasses such as Carbon Monoxide can buildup from hot work in confined spaces
* Workers can face entrapment when physical barriers or equipment fails

In the united states, OSHA requires confined spaces where hot work is done to acquire a permit for hot work. General requirements for hot work include:

* The employer shall post danger signs or other effective means of the existence, location, and danger posed by permit spaces
* The employer must have a written permit confined space program available for inspection by employees

There are several specific circumstances in which an employer may qualify for exemptions from parts of the regulation, such as when the hazard present is solely a hazardous atmosphere and forced ventilation is utilized.

Standards

Most countries in the world use their own rules and regulations that have different responsibilities for both the employer and employee regarding safety and risk mitigation in the workplace, while some countries lack these rules or struggle to enforce them. The International Fire Code Chapter 35 presents a general framework for countries to adopt and utilize in the building of their own safety regulations regarding hot work.

In the United States, OSHA maintains regulations for hot work in the marine industrial setting. The following regulations apply:
Hot Work. - 1915.14Welding, cutting and heating (hot work). - 1917.152Precautions for hot work. - 1915.503Welding, Cutting, and Brazing definitions - 1910.251Welding, Cutting and Brazing General Requirements - 1910.252Oxygen-fuel gas welding and cutting - 1910.253Arc Welding and cutting - 1910.254Resistance Welding - 1910.255Gas Welding and cutting - 1926.350

Other relevant literature is:
* API RP 2009 : Safe Welding, Cutting, and Hot Work Practices in the Petroleum and Petrochemical Industries, published by the American Petroleum Institute (API).API
RP 2009: Safe Welding, Cutting, and Hot Work Practices in the Petroleum and Petrochemical Industries
accessed 18 March 2020

See also

* Oil Industry Safety Directorate

References

{{Reflist

External links

*
Hot Work / Welding - OSHA

Welding safety
Occupational hazards
Fire protection