HOME

TheInfoList



OR:

Geotechnical engineering is the branch of
civil engineering Civil engineering is a professional engineering discipline that deals with the design, construction, and maintenance of the physical and naturally built environment, including public works such as roads, bridges, canals, dams, airports, sewa ...
concerned with the engineering behavior of earth materials. It uses the principles of
soil mechanics Soil mechanics is a branch of soil physics and applied mechanics that describes the behavior of soils. It differs from fluid mechanics and solid mechanics in the sense that soils consist of a heterogeneous mixture of fluids (usually air and wat ...
and
rock mechanics Rock mechanics is a theoretical and applied science of the mechanical behavior of rock and rock masses; compared to geology, it is that branch of mechanics concerned with the response of rock and rock masses to the force fields of their physical env ...
for the solution of its respective
engineering Engineering is the use of scientific principles to design and build machines, structures, and other items, including bridges, tunnels, roads, vehicles, and buildings. The discipline of engineering encompasses a broad range of more speciali ...
problems. It also relies on knowledge of
geology Geology () is a branch of natural science concerned with Earth and other Astronomical object, astronomical objects, the features or rock (geology), rocks of which it is composed, and the processes by which they change over time. Modern geology ...
,
hydrology Hydrology () is the scientific study of the movement, distribution, and management of water on Earth and other planets, including the water cycle, water resources, and environmental watershed sustainability. A practitioner of hydrology is call ...
,
geophysics Geophysics () is a subject of natural science concerned with the physical processes and physical properties of the Earth and its surrounding space environment, and the use of quantitative methods for their analysis. The term ''geophysics'' so ...
, and other related sciences. Geotechnical (rock) engineering is a subdiscipline of
geological engineering Geological engineering is a discipline of engineering concerned with the application of geological science and engineering principles to fields, such as civil engineering, mining, environmental engineering, and forestry, among others.M. Diederichs, ...
. In addition to
civil engineering Civil engineering is a professional engineering discipline that deals with the design, construction, and maintenance of the physical and naturally built environment, including public works such as roads, bridges, canals, dams, airports, sewa ...
, geotechnical engineering also has applications in
military A military, also known collectively as armed forces, is a heavily armed, highly organized force primarily intended for warfare. It is typically authorized and maintained by a sovereign state, with its members identifiable by their distinct ...
,
mining Mining is the extraction of valuable minerals or other geological materials from the Earth, usually from an ore body, lode, vein, seam, reef, or placer deposit. The exploitation of these deposits for raw material is based on the econom ...
,
petroleum Petroleum, also known as crude oil, or simply oil, is a naturally occurring yellowish-black liquid mixture of mainly hydrocarbons, and is found in geological formations. The name ''petroleum'' covers both naturally occurring unprocessed crud ...
,
coastal engineering Coastal engineering is a branch of civil engineering concerned with the specific demands posed by constructing at or near the coast, as well as the development of the coast itself. The hydrodynamic impact of especially waves, tides, storm surges ...
, and
offshore construction Offshore construction is the installation of structures and facilities in a marine environment, usually for the production and transmission of electricity, oil, gas and other resources. It is also called maritime engineering. Construction a ...
. The fields of geotechnical engineering and
engineering geology Engineering geology is the application of geology to engineering study for the purpose of assuring that the geological factors regarding the location, design, construction, operation and maintenance of engineering works are recognized and acc ...
have knowledge areas that overlap, however, while geotechnical engineering is a specialty of
civil engineering Civil engineering is a professional engineering discipline that deals with the design, construction, and maintenance of the physical and naturally built environment, including public works such as roads, bridges, canals, dams, airports, sewa ...
, engineering geology is a specialty of
geology Geology () is a branch of natural science concerned with Earth and other Astronomical object, astronomical objects, the features or rock (geology), rocks of which it is composed, and the processes by which they change over time. Modern geology ...
: They share the same principles of soil mechanics and rock mechanics, but differ in the application.


History

Humans have historically used soil as a material for flood control, irrigation purposes, burial sites, building foundations, and as construction material for buildings. First activities were linked to
irrigation Irrigation (also referred to as watering) is the practice of applying controlled amounts of water to land to help grow crops, landscape plants, and lawns. Irrigation has been a key aspect of agriculture for over 5,000 years and has been devel ...
and
flood control Flood control methods are used to reduce or prevent the detrimental effects of flood waters."Flood Control", MSN Encarta, 2008 (see below: Further reading). Flood relief methods are used to reduce the effects of flood waters or high water level ...
, as demonstrated by traces of dykes,
dams A dam is a barrier that stops or restricts the flow of surface water or underground streams. Reservoirs created by dams not only suppress floods but also provide water for activities such as irrigation, human consumption, industrial use ...
, and
canals Canals or artificial waterways are waterways or engineered channels built for drainage management (e.g. flood control and irrigation) or for conveyancing water transport vehicles (e.g. water taxi). They carry free, calm surface flow un ...
dating back to at least 2000 BCE that were found in ancient
Egypt Egypt ( ar, مصر , ), officially the Arab Republic of Egypt, is a List of transcontinental countries, transcontinental country spanning the North Africa, northeast corner of Africa and Western Asia, southwest corner of Asia via a land bridg ...
, ancient
Mesopotamia Mesopotamia ''Mesopotamíā''; ar, بِلَاد ٱلرَّافِدَيْن or ; syc, ܐܪܡ ܢܗܪ̈ܝܢ, or , ) is a historical region of Western Asia situated within the Tigris–Euphrates river system, in the northern part of the ...
and the
Fertile Crescent The Fertile Crescent ( ar, الهلال الخصيب) is a crescent-shaped region in the Middle East, spanning modern-day Iraq, Syria, Lebanon, Israel, Palestine and Jordan, together with the northern region of Kuwait, southeastern region of ...
, as well as around the early settlements of
Mohenjo Daro Mohenjo-daro (; sd, موئن جو دڙو'', ''meaning 'Mound of the Dead Men';Indus valley The Indus ( ) is a transboundary river of Asia and a trans-Himalayan river of South and Central Asia. The river rises in mountain springs northeast of Mount Kailash in Western Tibet, flows northwest through the disputed region of Kashmir, ...
. As the cities expanded, structures were erected and supported by formalized foundations;
Ancient Greeks Ancient Greece ( el, Ἑλλάς, Hellás) was a northeastern Mediterranean civilization, existing from the Greek Dark Ages of the 12th–9th centuries BC to the end of classical antiquity ( AD 600), that comprised a loose collection of cult ...
notably constructed pad footings and strip-and-raft foundations. Until the 18th century, however, no theoretical basis for soil design had been developed and the discipline was more of an art than a science, relying on past experience. Several foundation-related engineering problems, such as the
Leaning Tower of Pisa The Leaning Tower of Pisa ( it, torre pendente di Pisa), or simply, the Tower of Pisa (''torre di Pisa'' ), is the ''campanile'', or freestanding bell tower, of Pisa Cathedral. It is known for its nearly four-degree lean, the result of an unst ...
, prompted scientists to begin taking a more scientific-based approach to examining the subsurface. The earliest advances occurred in the development of earth pressure theories for the construction of retaining walls. Henri Gautier, a French Royal Engineer, recognized the "natural slope" of different soils in 1717, an idea later known as the soil's
angle of repose The angle of repose, or critical angle of repose, of a granular material is the steepest angle of descent or dip relative to the horizontal plane to which a material can be piled without slumping. At this angle, the material on the slope fac ...
. A rudimentary soil classification system was also developed based on a material's unit weight, which is no longer considered a good indication of soil type. The application of the principles of
mechanics Mechanics (from Ancient Greek: μηχανική, ''mēkhanikḗ'', "of machines") is the area of mathematics and physics concerned with the relationships between force, matter, and motion among physical objects. Forces applied to objec ...
to soils was documented as early as 1773 when Charles Coulomb (a physicist, engineer, and army Captain) developed improved methods to determine the earth pressures against military ramparts. Coulomb observed that, at failure, a distinct slip plane would form behind a sliding retaining wall and he suggested that the maximum shear stress on the slip plane, for design purposes, was the sum of the soil cohesion, c, and friction \sigma\,\! \tan(\phi\,\!), where \sigma\,\! is the normal stress on the slip plane and \phi\,\! is the friction angle of the soil. By combining Coulomb's theory with
Christian Otto Mohr Christian Otto Mohr (8 October 1835 – 2 October 1918) was a German civil engineer. He is renowned for his contributions to the field of structural engineering, such as Mohr's circle, and for his study of stress. Biography He was born on 8 Oct ...
's 2D stress state, the theory became known as Mohr-Coulomb theory. Although it is now recognized that precise determination of cohesion is impossible because c is not a fundamental soil property,Disturbed soil properties and geotechnical design, Schofield, Andrew N., Thomas Telford, 2006. the Mohr-Coulomb theory is still used in practice today. In the 19th century,
Henry Darcy Henry Philibert Gaspard Darcy (, 10 June 1803 – 3 January 1858) was a French engineer who made several important contributions to hydraulics, including Darcy’s law for flow in porous media. Early life Darcy was born in Dijon, France, on J ...
developed what is now known as
Darcy's Law Darcy's law is an equation that describes the flow of a fluid through a porous medium. The law was formulated by Henry Darcy based on results of experiments on the flow of water through beds of sand, forming the basis of hydrogeology, a branch of ...
, describing the flow of fluids in a
porous media A porous medium or a porous material is a material containing pores (voids). The skeletal portion of the material is often called the "matrix" or "frame". The pores are typically filled with a fluid (liquid or gas). The skeletal material is usu ...
.
Joseph Boussinesq Joseph Valentin Boussinesq (; 13 March 1842 – 19 February 1929) was a French mathematician and physicist who made significant contributions to the theory of hydrodynamics, vibration, light, and heat. Biography From 1872 to 1886, he was appoin ...
(a mathematician and physicist) developed theories of stress distribution in elastic solids that proved useful for estimating stresses at depth in the ground;
William Rankine William John Macquorn Rankine (; 5 July 1820 – 24 December 1872) was a Scottish mechanical engineer who also contributed to civil engineering, physics and mathematics. He was a founding contributor, with Rudolf Clausius and William Thomson ( ...
, an engineer and physicist, developed an alternative to Coulomb's earth pressure theory.
Albert Atterberg Albert Mauritz Atterberg (19 March 1846 – 4 April 1916) was a Swedish chemist and agricultural scientist who created the Atterberg limits, which are commonly referred to by geotechnical engineers and engineering geologists today. In Sweden he ...
developed the clay consistency indices that are still used today for soil classification.
Osborne Reynolds Osborne Reynolds (23 August 1842 – 21 February 1912) was an Irish-born innovator in the understanding of fluid dynamics. Separately, his studies of heat transfer between solids and fluids brought improvements in boiler and condenser design. ...
recognized in 1885, that shearing causes volumetric dilation of dense and contraction of loose
granular material A granular material is a conglomeration of discrete solid, macroscopic particles characterized by a loss of energy whenever the particles interact (the most common example would be friction when grains collide). The constituents that compose ...
s. Modern geotechnical engineering is said to have begun in 1925 with the publication of ''Erdbaumechanik'' by
Karl Terzaghi Karl von Terzaghi (October 2, 1883 – October 25, 1963) was an Austrian mechanical engineer, geotechnical engineer, and geologist known as the "father of soil mechanics and geotechnical engineering". Early life In 1883, he was born the first c ...
(a mechanical engineer and geologist). Considered by many to be the father of modern soil mechanics and geotechnical engineering, Terzaghi developed the principle of effective
stress Stress may refer to: Science and medicine * Stress (biology), an organism's response to a stressor such as an environmental condition * Stress (linguistics), relative emphasis or prominence given to a syllable in a word, or to a word in a phrase ...
, and demonstrated that the
shear strength In engineering, shear strength is the strength of a material or component against the type of yield or structural failure when the material or component fails in shear. A shear load is a force that tends to produce a sliding failure on a materi ...
of soil is controlled by effective stress. Terzaghi also developed the framework for theories of bearing capacity of foundations, and the theory for prediction of the rate of settlement of clay layers due to consolidation.Soil Mechanics, Lambe, T.William and Whitman, Robert V., Massachusetts Institute of Technology, John Wiley & Sons., 1969. Afterwards,
Maurice Biot Maurice Anthony Biot (May 25, 1905 – September 12, 1985) was a Belgian-American applied physicist. He made contributions in thermodynamics, aeronautics, geophysics, earthquake engineering, and electromagnetism. Particularly, he was accredited as ...
fully developed the three-dimensional soil consolidation theory, extending the one-dimensional model previously developed by Terzaghi to more general hypotheses and introducing the set of basic equations of
Poroelasticity Poroelasticity is a field in materials science and mechanics that studies the interaction between fluid flow and solids deformation within a linear porous medium and it is an extension of elasticity and porous medium flow (diffusion equation). The d ...
.
Alec Skempton Sir Alec Westley Skempton (4 June 1914 – 9 August 2001) was an English civil engineer internationally recognised, along with Karl Terzaghi, as one of the founding fathers of the engineering discipline of soil mechanics. He established the soi ...
in his work in 1960, has carried out an extensive review of available formulations and experimental data in literature about effective stress valid in soil, concrete and rock, in order to reject some of these expressions, as well as clarify what expression was appropriate according to several work hypotheses, such as stress–strain or strength behaviour, saturated or nonsaturated media, rock/concrete or soil behaviour, etc. In his 1948 book, Donald Taylor recognized that interlocking and dilation of densely packed particles contributed to the peak strength of a soil. The interrelationships between volume change behavior (dilation, contraction, and consolidation) and shearing behavior were all connected via the theory of plasticity using
critical state soil mechanics Critical state soil mechanics is the area of soil mechanics that encompasses the conceptual models that represent the mechanical behavior of saturated remolded soils based on the ''Critical State'' concept. Formulation The Critical State concept ...
by Roscoe, Schofield, and Wroth with the publication of "On the Yielding of Soils" in 1958.
Critical state soil mechanics Critical state soil mechanics is the area of soil mechanics that encompasses the conceptual models that represent the mechanical behavior of saturated remolded soils based on the ''Critical State'' concept. Formulation The Critical State concept ...
is the basis for many contemporary advanced
constitutive model In physics and engineering, a constitutive equation or constitutive relation is a relation between two physical quantities (especially kinetic quantities as related to kinematic quantities) that is specific to a material or substance, and approx ...
s describing the behavior of soil.Soil Behavior and Critical State Soil Mechanics, Wood, David Muir, Cambridge University Press, 1990.
Geotechnical centrifuge modeling Geotechnical centrifuge modeling is a technique for testing physical scale models of geotechnical engineering systems such as natural and man-made slopes and earth retaining structures and building or bridge foundations. The scale model is typic ...
is a method of testing physical scale models of geotechnical problems. The use of a centrifuge enhances the similarity of the scale model tests involving soil because the strength and
stiffness Stiffness is the extent to which an object resists deformation in response to an applied force. The complementary concept is flexibility or pliability: the more flexible an object is, the less stiff it is. Calculations The stiffness, k, of a ...
of soil is very sensitive to the confining
pressure Pressure (symbol: ''p'' or ''P'') is the force applied perpendicular to the surface of an object per unit area over which that force is distributed. Gauge pressure (also spelled ''gage'' pressure)The preferred spelling varies by country a ...
. The
centrifugal acceleration In Newtonian mechanics, the centrifugal force is an inertial force (also called a "fictitious" or "pseudo" force) that appears to act on all objects when viewed in a rotating frame of reference. It is directed away from an axis which is parall ...
allows a researcher to obtain large (prototype-scale) stresses in small physical models.


Soil mechanics

In geotechnical engineering, soils are considered as a three-phase material composed of: rock or
mineral In geology and mineralogy, a mineral or mineral species is, broadly speaking, a solid chemical compound with a fairly well-defined chemical composition and a specific crystal structure that occurs naturally in pure form.John P. Rafferty, ed. (2 ...
particles, water and air. The voids of a soil, the spaces in between mineral particles, contain the water and air. The engineering properties of soils are affected by four main factors: the predominant size of the mineral particles, the type of mineral particles, the grain size distribution, and the relative quantities of mineral, water and air present in the soil matrix. Fine particles (fines) are defined as particles less than 0.075 mm in diameter.


Soil properties

Some of the important properties of soils that are used by geotechnical engineers to analyze site conditions and design earthworks, retaining structures, and foundations are: ; Specific weight or Unit Weight: Cumulative weight of the solid particles, water and air of the unit volume of soil. Note that the air phase is often assumed to be weightless. ;
Porosity Porosity or void fraction is a measure of the void (i.e. "empty") spaces in a material, and is a fraction of the volume of voids over the total volume, between 0 and 1, or as a percentage between 0% and 100%. Strictly speaking, some tests measur ...
: Ratio of the volume of voids (containing air, water, or other fluids) in a soil to the total volume of the soil. Porosity is mathematically related to void ratio as shown below n=\frac :here ''e'' is void ratio and ''n'' is porosity ;
Void ratio The void ratio of a mixture is the ratio of the volume of voids to volume of solids. It is a dimensionless quantity in materials science, and is closely related to porosity as follows: :e = \frac = \frac = \frac and :\phi = \frac = \frac = \fr ...
: The ratio of the volume of voids to the volume of solid particles in a soil mass. Void ratio is mathematically related to the porosity by e=\frac ; Permeability: A measure of the ability of water to flow through the soil. It is expressed in units of darcies (d). Permeability of 1 d allows the flow of 1 cm3 per second of fluid with 1 cP (centipoise) viscosity through a cross-sectional area of 1 cm2 when a pressure gradient of 1 atm/cm is applied. ;
Compressibility In thermodynamics and fluid mechanics, the compressibility (also known as the coefficient of compressibility or, if the temperature is held constant, the isothermal compressibility) is a measure of the instantaneous relative volume change of a f ...
: The rate of change of volume with effective stress. If the pores are filled with water, then the water must be squeezed out of the pores to allow volumetric compression of the soil; this process is called consolidation. ;
Shear strength In engineering, shear strength is the strength of a material or component against the type of yield or structural failure when the material or component fails in shear. A shear load is a force that tends to produce a sliding failure on a materi ...
: The maximum
shear stress Shear stress, often denoted by ( Greek: tau), is the component of stress coplanar with a material cross section. It arises from the shear force, the component of force vector parallel to the material cross section. '' Normal stress'', on ...
that can be applied in a soil mass without causing shear failure. ;
Atterberg Limits The Atterberg limits are a basic measure of the critical water contents of a fine-grained soil: its shrinkage limit, plastic limit, and liquid limit. Depending on its water content, soil may appear in one of four states: solid, semi-solid, plast ...
:
Liquid limit The Atterberg limits are a basic measure of the critical water contents of a fine-grained soil: its shrinkage limit, plastic limit, and liquid limit. Depending on its water content, soil may appear in one of four states: solid, semi-solid, plastic ...
,
Plastic limit The Atterberg limits are a basic measure of the critical water contents of a fine-grained soil: its shrinkage limit, plastic limit, and liquid limit. Depending on its water content, soil may appear in one of four states: solid, semi-solid, plastic ...
, and Shrinkage limit. These indices are used for estimation of other engineering properties and for
soil classification Soil classification deals with the systematic categorization of soils based on distinguishing characteristics as well as criteria that dictate choices in use. Overview Soil classification is a dynamic subject, from the structure of the system, ...
.


Geotechnical investigation

The tasks of a geotechnical engineer comprises the investigation of subsurface conditions and materials; the determination of the relevant physical, mechanical, and chemical properties of these materials; the design of
earthworks Earthworks may refer to: Construction *Earthworks (archaeology), human-made constructions that modify the land contour *Earthworks (engineering), civil engineering works created by moving or processing quantities of soil *Earthworks (military), mi ...
and retaining structures (including dams, embankments, sanitary landfills, deposits of
hazardous waste Hazardous waste is waste that has substantial or potential threats to public health or the environment. Hazardous waste is a type of dangerous goods. They usually have one or more of the following hazardous traits: ignitability, reactivity, cor ...
),
tunnels A tunnel is an underground passageway, dug through surrounding soil, earth or rock, and enclosed except for the entrance and exit, commonly at each end. A Pipeline transport, pipeline is not a tunnel, though some recent tunnels have used ...
, and structure foundations; the monitoring of site conditions, earthwork, and foundation construction; the evaluation of the stability of natural slopes and man-made soil deposits; the assessment of the risks posed by site conditions; and the prediction, prevention, and mitigation of damage caused by
natural hazard A natural hazard is a natural phenomenon that might have a negative effect on humans and other animals, or the environment. Natural hazard events can be classified into two broad categories: geophysical and biological. An example of the distinc ...
s (such as
avalanche An avalanche is a rapid flow of snow down a slope, such as a hill or mountain. Avalanches can be set off spontaneously, by such factors as increased precipitation or snowpack weakening, or by external means such as humans, animals, and ea ...
s,
mud flow A mudflow or mud flow is a form of mass wasting involving fast-moving flow of debris that has become liquified by the addition of water. Such flows can move at speeds ranging from 3 meters/minute to 5 meters/second. Mudflows contain a significa ...
s,
landslide Landslides, also known as landslips, are several forms of mass wasting that may include a wide range of ground movements, such as rockfalls, deep-seated slope failures, mudflows, and debris flows. Landslides occur in a variety of environmen ...
s,
rockslide A rockslide is a type of landslide caused by rock failure in which part of the bedding plane of failure passes through compacted rock and material collapses ''en masse'' and not in individual blocks. Note that a rockslide is similar to an avalanc ...
s,
sinkhole A sinkhole is a depression or hole in the ground caused by some form of collapse of the surface layer. The term is sometimes used to refer to doline, enclosed depressions that are locally also known as ''vrtače'' and shakeholes, and to openi ...
s, and
volcanic eruptions Several types of volcanic eruptions—during which lava, tephra (ash, lapilli, volcanic bombs and volcanic blocks), and assorted gases are expelled from a volcanic vent or fissure—have been distinguished by volcanologists. These are often ...
).Terzaghi, K., Peck, R.B. and Mesri, G. (1996), ''Soil Mechanics in Engineering Practice'' 3rd Ed., John Wiley & Sons, Inc. Holtz, R. and Kovacs, W. (1981), ''An Introduction to Geotechnical Engineering'', Prentice-Hall, Inc. Geotechnical engineers and engineering geologists perform geotechnical investigations to obtain information on the
physical properties A physical property is any property that is measurable, whose value describes a state of a physical system. The changes in the physical properties of a system can be used to describe its changes between momentary states. Physical properties are ...
of soil and rock underlying (and sometimes adjacent to) a site to design earthworks and foundations for proposed structures, and for the repair of distress to earthworks and structures caused by subsurface conditions. A geotechnical investigation will include surface exploration and subsurface exploration of a site. Sometimes, geophysical methods are used to obtain data about sites. Subsurface exploration usually involves in-situ testing (two common examples of in-situ tests are the
standard penetration test The standard penetration test (SPT) is an in-situ dynamic penetration test designed to provide information on the geotechnical engineering properties of soil. This test is the most frequently used subsurface exploration drilling test performed ...
and
cone penetration test The cone penetration or cone penetrometer test (CPT) is a method used to determine the geotechnical engineering properties of soils and delineating soil stratigraphy. It was initially developed in the 1950s at the Dutch Laboratory for Soil Mecha ...
). In addition site investigation will often include subsurface sampling and laboratory testing of the soil samples retrieved. The digging of test pits and trenching (particularly for locating faults and slide planes) may also be used to learn about soil conditions at depth. Large diameter borings are rarely used due to safety concerns and expense, but are sometimes used to allow a geologist or engineer to be lowered into the borehole for direct visual and manual examination of the soil and rock
stratigraphy Stratigraphy is a branch of geology concerned with the study of rock layers ( strata) and layering (stratification). It is primarily used in the study of sedimentary and layered volcanic rocks. Stratigraphy has three related subfields: lithost ...
. A variety of soil samplers exists to meet the needs of different engineering projects. The
standard penetration test The standard penetration test (SPT) is an in-situ dynamic penetration test designed to provide information on the geotechnical engineering properties of soil. This test is the most frequently used subsurface exploration drilling test performed ...
(SPT), which uses a thick-walled split spoon sampler, is the most common way to collect disturbed samples. Piston samplers, employing a thin-walled tube, are most commonly used for the collection of less disturbed samples. More advanced methods, such as the Sherbrooke block sampler, are superior, but even more expensive. Coring frozen ground provides high-quality undisturbed samples from any ground conditions, such as fill, sand,
moraine A moraine is any accumulation of unconsolidated debris ( regolith and rock), sometimes referred to as glacial till, that occurs in both currently and formerly glaciated regions, and that has been previously carried along by a glacier or ice sh ...
and rock fracture zones.
Atterberg limits The Atterberg limits are a basic measure of the critical water contents of a fine-grained soil: its shrinkage limit, plastic limit, and liquid limit. Depending on its water content, soil may appear in one of four states: solid, semi-solid, plast ...
tests,
water content Water content or moisture content is the quantity of water contained in a material, such as soil (called soil moisture), rock, ceramics, crops, or wood. Water content is used in a wide range of scientific and technical areas, and is expressed as ...
measurements, and
grain A grain is a small, hard, dry fruit ( caryopsis) – with or without an attached hull layer – harvested for human or animal consumption. A grain crop is a grain-producing plant. The two main types of commercial grain crops are cereals and legum ...
size analysis, for example, may be performed on disturbed samples obtained from thick-walled soil samplers. Properties such as shear strength, stiffness,
hydraulic conductivity Hydraulic conductivity, symbolically represented as (unit: m/s), is a property of porous materials, soils and rocks, that describes the ease with which a fluid (usually water) can move through the pore space, or fractures network. It depends on ...
, and coefficient of consolidation may be significantly altered by sample disturbance. To measure these properties in the laboratory, high-quality sampling is required. Common tests to measure the strength and stiffness include the triaxial shear and unconfined compression test. These can all be done through a third party testing company such a
Intertek
Surface
exploration Exploration refers to the historical practice of discovering remote lands. It is studied by geographers and historians. Two major eras of exploration occurred in human history: one of convergence, and one of divergence. The first, covering most ...
can include
geologic map A geologic map or geological map is a special-purpose map made to show various geological features. Rock units or geologic strata are shown by color or symbols. Bedding planes and structural features such as faults, folds, are shown with s ...
ping, geophysical methods, and
photogrammetry Photogrammetry is the science and technology of obtaining reliable information about physical objects and the environment through the process of recording, measuring and interpreting photographic images and patterns of electromagnetic radiant ima ...
; or it can be as simple as an engineer walking around to observe the physical conditions at the site. Geologic mapping and interpretation of
geomorphology Geomorphology (from Ancient Greek: , ', "earth"; , ', "form"; and , ', "study") is the scientific study of the origin and evolution of topographic and bathymetric features created by physical, chemical or biological processes operating at or ...
are typically completed in consultation with a
geologist A geologist is a scientist who studies the solid, liquid, and gaseous matter that constitutes Earth and other terrestrial planets, as well as the processes that shape them. Geologists usually study geology, earth science, or geophysics, althou ...
or
engineering geologist An engineering geologist is a geologist trained in the discipline of engineering geology. Many organizations and governments have programs for the qualification, testing and certification of engineering geologists as a protection to the public. En ...
. Geophysical exploration is also sometimes used. Geophysical techniques used for subsurface exploration include measurement of
seismic waves A seismic wave is a wave of acoustic energy that travels through the Earth. It can result from an earthquake, volcanic eruption, magma movement, a large landslide, and a large man-made explosion that produces low-frequency acoustic energy. ...
(pressure, shear, and
Rayleigh waves Rayleigh waves are a type of surface acoustic wave that travel along the surface of solids. They can be produced in materials in many ways, such as by a localized impact or by piezo-electric transduction, and are frequently used in non-destructi ...
), surface-wave methods and/or downhole methods, and electromagnetic surveys (magnetometer,
resistivity Electrical resistivity (also called specific electrical resistance or volume resistivity) is a fundamental property of a material that measures how strongly it resists electric current. A low resistivity indicates a material that readily allows ...
, and
ground-penetrating radar Ground-penetrating radar (GPR) is a Geophysics, geophysical method that uses radar pulses to Geophysical imaging, image the subsurface. It is a non-intrusive method of surveying the sub-surface to investigate underground utilities such as concrete, ...
).


Infrastructure

# Medium / Heavy-duty percussion
drilling Drilling is a cutting process where a drill bit is spun to cut a hole of circular cross-section in solid materials. The drill bit is usually a rotary cutting tool, often multi-point. The bit is pressed against the work-piece and rotated at ...
winches. # Heavy-duty rotary diamond core drill machine. # Light duty geo machine. # Manual winches with tripod. # Dynamic cone penetration test machine. # Static cone penetration machine. # Pressure meter test machine. # Field vane shear test machine. # Field CBR (California Bearing Ratio) test machine. # Block vibration test machine. # Rapid moisture meter machine. # In Situ density core cutter machine. # Standard Penetration Test machine. # Field permeability single and double packer machine.


Application

# DESIGN OF BRIDGES: Foundation type and Depth Recommendation. # DESIGN OF TUNNEL: RMR and Q value calculation. # STRUCTURAL DESIGN OF BUILDINGS: Brings out the safe bearing load. # DESIGN OF RETAINING STRUCTURES: Recommendation of Ground improvement technique.


Structures


Foundations

The foundation of a building's or transportation infrastructure transmits loads from the structures to the earth. Geotechnical
engineers Engineers, as practitioners of engineering, are professionals who invent, design, analyze, build and test machines, complex systems, structures, gadgets and materials to fulfill functional objectives and requirements while considering the li ...
design foundations based on the load characteristics of the structure and the properties of the soils and/or
bedrock In geology, bedrock is solid rock that lies under loose material ( regolith) within the crust of Earth or another terrestrial planet. Definition Bedrock is the solid rock that underlies looser surface material. An exposed portion of be ...
at the site. In general, geotechnical engineers: # Estimate the magnitude and location of the loads to be supported. # Develop an investigation plan to explore the subsurface. # Determine the necessary soil parameters through field and lab testing (e.g., consolidation test,
triaxial shear test A triaxial shear test is a common method to measure the mechanical properties of many deformable solids, especially soil (e.g., sand, clay) and rock, and other granular materials or powders. There are several variations on the test. In a triaxia ...
, vane shear test,
standard penetration test The standard penetration test (SPT) is an in-situ dynamic penetration test designed to provide information on the geotechnical engineering properties of soil. This test is the most frequently used subsurface exploration drilling test performed ...
). # Design the foundation in the safest and most economical manner. The primary considerations for foundation support are
bearing capacity In geotechnical engineering, bearing capacity is the capacity of soil to support the loads applied to the ground. The bearing capacity of soil is the maximum average contact pressure between the foundation and the soil which should not produce sh ...
, settlement, and ground movement beneath the foundations. Bearing capacity is the ability of the site soils to support the loads imposed by buildings or structures. Settlement occurs under all foundations in all soil conditions, though lightly loaded structures or rock sites may experience negligible settlements. For heavier structures and/or softer soils, both overall settlement relative to unbuilt areas or neighboring buildings, and differential settlement under a single structure can be of concerns. Of particular concern is a settlement which occurs over time, as immediate settlement can usually be compensated for during construction. Ground movement beneath a structure's foundations can occur due to low bearing capacity soils (soft clay,
silt Silt is granular material of a size between sand and clay and composed mostly of broken grains of quartz. Silt may occur as a soil (often mixed with sand or clay) or as sediment mixed in suspension with water. Silt usually has a floury feel ...
, organic, loose sand), volumetric change of expansive soils due to moisture or freeze-thaw cycles or melting of
permafrost Permafrost is ground that continuously remains below 0 °C (32 °F) for two or more years, located on land or under the ocean. Most common in the Northern Hemisphere, around 15% of the Northern Hemisphere or 11% of the global surface ...
, or due to unsuitable fill material with low strength, highly compressible and high water content. All these factors must be considered during the design of foundations. In areas of shallow bedrock, most foundations may bear directly on bedrock; in other areas, the soil may provide sufficient strength for the support of structures. In areas of deeper bedrock with soft overlying soils, deep foundations are used to support structures directly on the bedrock; in areas where bedrock is not economically available, stiff "bearing layers" are used to support deep foundations instead.


Shallow

Shallow foundations are a type of foundation that transfers the building load to very near the surface, rather than to a subsurface layer. Shallow foundations typically have a depth to width ratio of less than 1.


=Footings

= Footings (often called "spread footings" because they spread the load) are structural elements which transfer structure loads to the ground by direct areal contact. Footings can be isolated footings for point or column loads or strip footings for wall or another long (line) loads. Footings are normally constructed from
reinforced concrete Reinforced concrete (RC), also called reinforced cement concrete (RCC) and ferroconcrete, is a composite material in which concrete's relatively low ultimate tensile strength, tensile strength and ductility are compensated for by the inclusion ...
cast directly onto the soil and are typically embedded into the ground to penetrate through the zone of
frost Frost is a thin layer of ice on a solid surface, which forms from water vapor in an above-freezing atmosphere coming in contact with a solid surface whose temperature is below freezing, and resulting in a phase change from water vapor (a g ...
movement and/or to obtain additional bearing capacity.


=Slab

= A variant on spread footings is to have the entire structure bear on a single slab of concrete underlying the entire area of the structure. Slabs must be thick enough to provide sufficient rigidity to spread the bearing loads somewhat uniformly and to minimize differential settlement across the foundation. In some cases, flexure is allowed and the building is constructed to tolerate small movements of the foundation instead. For small structures, like single-family houses, the slab may be less than 300  mm thick; for larger structures, the foundation slab may be several meters thick. Slab foundations can be either slab-on-grade foundations or embedded foundations, typically in buildings with
basements A basement or cellar is one or more Storey, floors of a building that are completely or partly below the storey, ground floor. It generally is used as a utility space for a building, where such items as the Furnace (house heating), furnace, ...
. Slab-on-grade foundations must be designed to allow for potential ground movement due to changing soil conditions.


Deep

Deep foundations are used for structures or heavy loads when shallow foundations cannot provide adequate capacity, due to size and structural limitations. They may also be used to transfer building loads past weak or compressible soil layers. While shallow foundations rely solely on the
bearing capacity In geotechnical engineering, bearing capacity is the capacity of soil to support the loads applied to the ground. The bearing capacity of soil is the maximum average contact pressure between the foundation and the soil which should not produce sh ...
of the soil beneath them, deep foundations can rely on end bearing resistance, frictional resistance along their length, or both in developing the required capacity. Geotechnical engineers use specialized tools, such as the
cone penetration test The cone penetration or cone penetrometer test (CPT) is a method used to determine the geotechnical engineering properties of soils and delineating soil stratigraphy. It was initially developed in the 1950s at the Dutch Laboratory for Soil Mecha ...
, to estimate the amount of skin and end bearing resistance available in the subsurface. There are many types of deep foundations including
piles Hemorrhoids (or haemorrhoids), also known as piles, are vascular structures in the anal canal. In their normal state, they are cushions that help with stool control. They become a disease when swollen or inflamed; the unqualified term ''he ...
, drilled shafts,
caissons Caisson (French for "box") may refer to: * Caisson (Asian architecture), a spider web ceiling * Caisson (engineering), a sealed underwater structure * Caisson (lock gate), a gate for a dock or lock, constructed as a floating caisson * Caisson (p ...
, piers, and earth stabilized columns. Large buildings such as
skyscraper A skyscraper is a tall continuously habitable building having multiple floors. Modern sources currently define skyscrapers as being at least or in height, though there is no universally accepted definition. Skyscrapers are very tall high-ri ...
s typically require deep foundations. For example, the
Jin Mao Tower The Jin Mao Tower (; Shanghainese:'' Cinmeu Dagho''; lit. ‘Golden Prosperity Building’), also known as the or , is a , 88-story (93 if counting the floors in the spire) landmark skyscraper in Lujiazui, Pudong, Shanghai, China. It contains a s ...
in
China China, officially the People's Republic of China (PRC), is a country in East Asia. It is the world's List of countries and dependencies by population, most populous country, with a Population of China, population exceeding 1.4 billion, slig ...
uses tubular steel piles about 1m (3.3  feet) driven to a depth of 83.5m (274  feet) to support its
weight In science and engineering, the weight of an object is the force acting on the object due to gravity. Some standard textbooks define weight as a vector quantity, the gravitational force acting on the object. Others define weight as a scalar qua ...
. In buildings that are constructed and found to undergo settlement,
underpinning In construction or renovation, underpinning is the process of strengthening the foundation of an existing building or other structure. Underpinning may be necessary for a variety of reasons: * The original foundation isn't strong or stable enough. ...
piles can be used to stabilize the existing building. There are three ways to place piles for a deep foundation. They can be driven, drilled, or installed by the use of an auger. Driven piles are extended to their necessary depths with the application of external energy in the same way a nail is hammered. There are four typical hammers used to drive such piles: drop hammers, diesel hammers, hydraulic hammers, and air hammers. Drop hammers simply drop a heavy weight onto the pile to drive it, while diesel hammers use a single-cylinder diesel engine to force piles through the Earth. Similarly, hydraulic and air hammers supply energy to piles through
hydraulic Hydraulics (from Greek: Υδραυλική) is a technology and applied science using engineering, chemistry, and other sciences involving the mechanical properties and use of liquids. At a very basic level, hydraulics is the liquid counte ...
and air forces. The energy imparted from a hammerhead varies with the type of hammer chosen and can be as high as a million-foot pounds for large scale diesel hammers, a very common hammerhead used in practice. Piles are made of a variety of material including steel, timber, and concrete. Drilled piles are created by first drilling a hole to the appropriate depth, and filling it with concrete. Drilled piles can typically carry more load than driven piles, simply due to a larger diameter pile. The auger method of pile installation is similar to drilled pile installation, but concrete is pumped into the hole as the auger is being removed.


Lateral earth support structures

A retaining wall is a structure that holds back earth. Retaining walls stabilize soil and rock from downslope movement or
erosion Erosion is the action of surface processes (such as water flow or wind) that removes soil, rock, or dissolved material from one location on the Earth's crust, and then transports it to another location where it is deposited. Erosion is d ...
and provide support for vertical or near-vertical grade changes.
Cofferdams A cofferdam is an enclosure built within a body of water to allow the enclosed area to be pumped out. This pumping creates a dry working environment so that the work can be carried out safely. Cofferdams are commonly used for construction or re ...
and bulkheads, structures to hold back water, are sometimes also considered retaining walls. The primary geotechnical concern in design and installation of retaining walls is that the weight of the retained material is creating
lateral earth pressure Lateral earth pressure is the pressure that soil exerts in the horizontal direction. The lateral earth pressure is important because it affects the consolidation behavior and strength of the soil and because it is considered in the design of geotec ...
behind the wall, which can cause the wall to deform or fail. The lateral earth pressure depends on the height of the wall, the density of the soil, the strength of the
soil Soil, also commonly referred to as earth or dirt, is a mixture of organic matter, minerals, gases, liquids, and organisms that together support life. Some scientific definitions distinguish ''dirt'' from ''soil'' by restricting the former ...
, and the amount of allowable movement of the wall. This pressure is smallest at the top and increases toward the bottom in a manner similar to hydraulic pressure, and tends to push the wall away from the backfill.
Groundwater Groundwater is the water present beneath Earth's surface in rock and Pore space in soil, soil pore spaces and in the fractures of stratum, rock formations. About 30 percent of all readily available freshwater in the world is groundwater. A unit ...
behind the wall that is not dissipated by a drainage system causes an additional horizontal hydraulic pressure on the wall.


Gravity walls

Gravity walls depend on the size and weight of the wall mass to resist pressures from behind. Gravity walls will often have a slight setback, or batter, to improve wall stability. For short, landscaped walls, gravity walls made from geocells, dry-stacked (mortarless) stone or segmental concrete units (masonry units) are commonly used. Earlier in the 20th century, taller retaining walls were often gravity walls made from large masses of concrete or stone. Today, taller retaining walls are increasingly built as composite gravity walls such as geocell retaining walls, steel-reinforced backfill soil with precast facing; gabions (stacked steel wire baskets filled with rocks), crib walls (cells built up log cabin style from precast concrete or timber and filled with soil or free-draining gravel) or soil-nailed walls (soil reinforced in place with steel and concrete rods). For ''reinforced-soil gravity walls'', the soil reinforcement is placed in horizontal layers throughout the height of the wall. Commonly, the soil reinforcement is ''
geogrid A geogrid is geosynthetic material used to reinforce soils and similar materials. Soils pull apart under tension. Compared to soil, geogrids are strong in tension. This fact allows them to transfer forces to a larger area of soil than would other ...
'', a high-strength polymer mesh, that provides tensile strength to hold the soil together. The wall face is often of a geocell or precast, segmental concrete units that can tolerate some differential movement. The reinforced soil's mass, along with the facing, becomes the gravity wall. The reinforced mass must be built large enough to retain the pressures from the soil behind it. Gravity walls usually must be a minimum of 30 to 40 percent as deep (thick) as the height of the wall and may have to be larger if there is a slope or surcharge on the wall.


Cantilever walls

Prior to the introduction of modern reinforced-soil gravity walls, cantilevered walls were the most common type of taller retaining wall.
Cantilever A cantilever is a rigid structural element that extends horizontally and is supported at only one end. Typically it extends from a flat vertical surface such as a wall, to which it must be firmly attached. Like other structural elements, a cant ...
ed walls are made from a relatively thin stem of steel-reinforced, cast-in-place concrete or mortared masonry (often in the shape of an inverted T). These walls cantilever loads (like a beam) to a large structural footing; converting horizontal pressures from behind the wall to vertical pressures on the ground below. Sometimes cantilevered walls are buttressed on the front, or include a counterfort on the back, to improve their stability against high loads. Buttresses are short wing walls at right angles to the main trend of the wall. These walls require rigid concrete footings below seasonal frost depth. This type of wall uses much less material than a traditional gravity wall. Cantilever walls resist lateral pressures by friction at the base of the wall and/or ''passive earth pressure'', the tendency of the soil to resist lateral movement. Basements are a form of cantilever walls, but the forces on the basement walls are greater than on conventional walls because the basement wall is not free to move.


Excavation shoring

Shoring Shoring is the process of temporarily supporting a building, vessel, structure, or trench with shores (props) when in danger of collapse or during repairs or alterations. ''Shoring'' comes from ''shore'', a timber or metal prop. Shoring may be verti ...
of temporary excavations frequently requires a wall design that does not extend laterally beyond the wall, so shoring extends below the planned base of the excavation. Common methods of shoring are the use of ''sheet piles'' or ''soldier beams and lagging''. Sheet piles are a form of driven piling using thin interlocking sheets of steel to obtain a continuous barrier in the ground and are driven prior to excavation. Soldier beams are constructed of wide flange steel H-sections spaced about 2–3 m apart, driven prior to excavation. As the excavation proceeds, horizontal timber or steel sheeting (lagging) is inserted behind the H-pile
flanges A flange is a protruded ridge, lip or rim (wheel), rim, either external or internal, that serves to increase shear strength, strength (as the flange of an iron beam (structure), beam such as an I-beam or a T-beam); for easy attachment/transfer of ...
. The use of underground space requires excavation, which may cause large and dangerous displacement of
soil Soil, also commonly referred to as earth or dirt, is a mixture of organic matter, minerals, gases, liquids, and organisms that together support life. Some scientific definitions distinguish ''dirt'' from ''soil'' by restricting the former ...
mass around the excavation. Since the space for slope excavation is limited in urban areas, cutting is done vertically. Retaining walls are made to prevent unsafe soil displacements around excavations. Diaphragm walls are a type of retaining walls that are very stiff and generally watertight. The horizontal movements of diaphragm walls are usually prevented by lateral supports. Diaphragm walls are expensive walls, but they save time and space and are also safe, so are widely used in urban deep excavations. In some cases, the lateral support which can be provided by the shoring wall alone is insufficient to resist the planned
lateral Lateral is a geometric term of location which may refer to: Healthcare *Lateral (anatomy), an anatomical direction * Lateral cricoarytenoid muscle * Lateral release (surgery), a surgical procedure on the side of a kneecap Phonetics *Lateral co ...
loads; in this case, additional support is provided by walers or tie-backs. Walers are structural elements that connect across the excavation so that the loads from the soil on either side of the excavation are used to resist each other, or which transfer horizontal loads from the shoring wall to the base of the excavation. Tie-backs are steel tendons drilled into the face of the wall which extends beyond the soil which is applying pressure to the wall, to provide additional lateral resistance to the wall.


Earthworks

*Excavation is the process of training earth according to requirement by removing soil from the site, either to level the land or to replace inferior subgrade with a soil with higher bearing capacity. *Filling is the process of training earth according to requirement by placing the soil on the site and levelling or to add natural or processed geomaterials (e.g., crushed stone aggregate) to increase the soil strength and structure support layers. * Compaction is the process by which the density of soil is increased and permeability of soil is decreased. Fill placement work often has specifications requiring a specific degree of compaction, or alternatively, specific properties of the compacted soil. In-situ soils can be compacted by rolling, deep
dynamic compaction Dynamic compaction is a method that is used to increase the density of the soil when certain subsurface constraints make other methods inappropriate. It is a method that is used to increase the density of soil deposits. The process involves dropp ...
, vibration, blasting, gyrating, kneading, compaction grouting etc.


Ground improvement

Ground improvement or modification is defined as the alteration of site foundation soils or project earth structures to provide better performance under design and/or operational loading conditions. Usually, the properties modified are shear strength, stiffness, and permeability. Ground improvement has developed sophisticated methods to support foundations for a wide variety of
buildings A building, or edifice, is an enclosed structure with a roof and walls standing more or less permanently in one place, such as a house or factory (although there's also portable buildings). Buildings come in a variety of sizes, shapes, and func ...
and
transportation infrastructure Transport (in British English), or transportation (in American English), is the intentional movement of humans, animals, and goods from one location to another. Modes of transport include air, land ( rail and road), water, cable, pipelin ...
, as urbanization and infrastructure spread to areas with challenging geotechnical conditions. Soil reinforcement is one of the most popular ground improvement techniques used to improve soil stiffness and strength. This can be achieved through different materials and techniques, e.g, reinforcement
geosynthetics Geosynthetics are synthetic products used to stabilize terrain. They are generally polymeric products used to solve civil engineering problems. This includes eight main product categories: geotextiles, geogrids, geonets, geomembranes, geosynth ...
such as geocells and geogrids, which disperse loads over a larger area, thus increasing the load-bearing capacity of the soil. Properly applied, i.e. after giving due consideration to the nature of the ground being improved and the type and loading of the structures being built, hydraulic, mechanical, chemical and/or biological ground improvement methods reduce direct and long-term costs.


Slope stabilization

Slope stability is the potential of soil covered slopes to withstand and undergo movement. Stability is determined by the balance of
shear stress Shear stress, often denoted by ( Greek: tau), is the component of stress coplanar with a material cross section. It arises from the shear force, the component of force vector parallel to the material cross section. '' Normal stress'', on ...
and
shear strength In engineering, shear strength is the strength of a material or component against the type of yield or structural failure when the material or component fails in shear. A shear load is a force that tends to produce a sliding failure on a materi ...
. A previously stable slope may be initially affected by preparatory factors, making the slope conditionally unstable. Triggering factors of a
slope failure Landslides, also known as landslips, are several forms of mass wasting that may include a wide range of ground movements, such as rockfalls, deep-seated slope failures, mudflows, and debris flows. Landslides occur in a variety of environme ...
can be climatic events that can then make a slope actively unstable, leading to mass movements. Mass movements can be caused by increases in shear stress, such as loading, lateral pressure, and transient forces. Alternatively, shear strength may be decreased by weathering, changes in pore water pressure, and organic material. Several modes of failure for earth slopes include falls, topples, slides, and flows. In slopes with coarse-grained soil or rocks, falls typically occur as the rapid descent of rocks and other loose slope material. A slope topples when a large column of soil tilts over its vertical axis at failure. Typical slope stability analysis considers sliding failures, categorized mainly as rotational slides or translational slides. As implied by the name, rotational slides fail along a generally curved surface, while translational slides fail along a more planar surface. A slope failing as flow would resemble a fluid flowing downhill.


=Slope stability analysis

= Stability analysis is needed for the design of engineered slopes and for estimating the risk of slope failure in natural or designed slopes. A common assumption is that a slope consists of a layer of soil sitting on top of a rigid base. The mass and the base are assumed to interact via friction. The interface between the mass and the base can be planar, curved, or have some other
complex geometry In mathematics, complex geometry is the study of geometric structures and constructions arising out of, or described by, the complex numbers. In particular, complex geometry is concerned with the study of spaces such as complex manifolds and c ...
. The goal of a slope stability analysis is to determine the conditions under which the mass will slip relative to the base and lead to slope failure. If the interface between the mass and the base of a slope has a complex geometry, slope stability analysis is difficult and
numerical solution Numerical analysis is the study of algorithms that use numerical approximation (as opposed to symbolic manipulations) for the problems of mathematical analysis (as distinguished from discrete mathematics). It is the study of numerical methods th ...
methods are required. Typically, the exact geometry of the interface is not known and a simplified interface geometry is assumed. Finite slopes require three-dimensional models to be analyzed. To keep the problem simple, most slopes are analyzed assuming that the slopes are infinitely wide, and can therefore be represented by two-dimensional models. A slope can be drained or undrained. The undrained condition is used in the calculations to produce conservative estimates of risk. A popular stability analysis approach is based on principles pertaining to the limit equilibrium concept. This method analyzes a finite or infinite slope as if it were about to fail along its sliding failure surface. Equilibrium stresses are calculated along the failure plane and compared to the soils shear strength as determined by Terzaghi's shear strength equation. Stability is ultimately decided by a factor of safety equal to the ratio of shear strength to the equilibrium stresses along the failure surface. A factor of safety greater than one generally implies a stable slope, failure of which should not occur assuming the slope is undisturbed. A factor of safety of 1.5 for static conditions is commonly used in practice.


Geosynthetics

Geosynthetics are a type of plastic
polymer A polymer (; Greek '' poly-'', "many" + '' -mer'', "part") is a substance or material consisting of very large molecules called macromolecules, composed of many repeating subunits. Due to their broad spectrum of properties, both synthetic a ...
products used in geotechnical engineering that improve engineering performance while reducing costs. This includes
geotextiles Geotextiles are permeable fabrics which, when used in association with soil, have the ability to separate, filter, reinforce, protect, or drain. Typically made from polypropylene or polyester, geotextile fabrics come in two basic forms: woven ...
, geogrids,
geomembranes A geomembrane is very low permeability synthetic membrane liner or barrier used with any geotechnical engineering related material so as to control fluid (liquid or gas) migration in a human-made project, structure, or system. Geomembranes are ...
, geocells, and geocomposites. The synthetic nature of the products makes them suitable for use in the ground where high levels of durability are required; their main functions include
drainage Drainage is the natural or artificial removal of a surface's water and sub-surface water from an area with excess of water. The internal drainage of most agricultural soils is good enough to prevent severe waterlogging (anaerobic condition ...
,
filtration Filtration is a physical separation process that separates solid matter and fluid from a mixture using a ''filter medium'' that has a complex structure through which only the fluid can pass. Solid particles that cannot pass through the filter ...
, reinforcement, separation, and containment.
Geosynthetics Geosynthetics are synthetic products used to stabilize terrain. They are generally polymeric products used to solve civil engineering problems. This includes eight main product categories: geotextiles, geogrids, geonets, geomembranes, geosynth ...
are available in a wide range of forms and materials, each to suit a slightly different end-use, although they are frequently used together. Some reinforcement geosynthetics, such as geogrids and more recently,
cellular confinement Cellular confinement systems (CCS)—also known as geocells—are widely used in construction for erosion control, soil stabilization on flat ground and steep slopes, channel protection, and structural reinforcement for load support and earth ...
systems, have shown to improve bearing capacity, modulus factors and soil stiffness and strength.These products have a wide range of applications and are currently used in many civil and geotechnical engineering applications including roads, airfields, railroads, embankments, piled embankments, retaining structures,
reservoirs A reservoir (; from French ''réservoir'' ) is an enlarged lake behind a dam. Such a dam may be either artificial, built to store fresh water or it may be a natural formation. Reservoirs can be created in a number of ways, including control ...
, canals, dams,
landfills A landfill site, also known as a tip, dump, rubbish dump, garbage dump, or dumping ground, is a site for the disposal of waste materials. Landfill is the oldest and most common form of waste disposal, although the systematic burial of the waste ...
, bank protection and coastal engineering.


Offshore

''Offshore'' (or ''marine'') ''geotechnical engineering'' is concerned with foundation design for human-made structures in the
sea The sea, connected as the world ocean or simply the ocean, is the body of salty water that covers approximately 71% of the Earth's surface. The word sea is also used to denote second-order sections of the sea, such as the Mediterranean Sea, ...
, away from the
coast The coast, also known as the coastline or seashore, is defined as the area where land meets the ocean, or as a line that forms the boundary between the land and the coastline. The Earth has around of coastline. Coasts are important zones in n ...
line (in opposition to ''onshore'' or ''nearshore'').Dean, E.T.R. (2010). Offshore Geotechnical Engineering – Principles and Practice. Thomas Telford, Reston, VA, 520 p.
Oil platform An oil platform (or oil rig, offshore platform, oil production platform, and similar terms) is a large structure with facilities to extract and process petroleum and natural gas that lie in rock formations beneath the seabed. Many oil platfor ...
s,
artificial island An artificial island is an island that has been constructed by people rather than formed by natural means. Artificial islands may vary in size from small islets reclaimed solely to support a single pillar of a building or structure to those th ...
s and
submarine pipeline A submarine pipeline (also known as marine, subsea or offshore pipeline) is a pipeline that is laid on the seabed or below it inside a trench.Dean, p. 338-340Gerwick, p. 583-585 In some cases, the pipeline is mostly on-land but in places it cross ...
s are examples of such structures. There are a number of significant differences between onshore and offshore geotechnical engineering.Randolph, M. and Gourvenec, S., 2011. Offshore geotechnical engineering. Spon Press, N.Y., 550 p. Notably, ground improvement (on the seabed) and site investigation are more expensive, the offshore structures are exposed to a wider range of
geohazard A geologic hazard or geohazard is an adverse geology, geologic condition capable of causing widespread damage or loss of property and life. These hazards are geological and environmental conditions and involve long-term or short-term geological ...
s, and the environmental and financial consequences are higher in case of failure. Offshore structures are exposed to various environmental loads, notably
wind Wind is the natural movement of air or other gases relative to a planet's surface. Winds occur on a range of scales, from thunderstorm flows lasting tens of minutes, to local breezes generated by heating of land surfaces and lasting a few ...
,
wave In physics, mathematics, and related fields, a wave is a propagating dynamic disturbance (change from equilibrium) of one or more quantities. Waves can be periodic, in which case those quantities oscillate repeatedly about an equilibrium (re ...
s and
currents Currents, Current or The Current may refer to: Science and technology * Current (fluid), the flow of a liquid or a gas ** Air current, a flow of air ** Ocean current, a current in the ocean *** Rip current, a kind of water current ** Current (stre ...
. These phenomena may affect the integrity or the serviceability of the structure and its foundation during its operational lifespan – they need to be taken into account in offshore design. In
subsea Subsea technology involves fully submerged ocean equipment, operations, or applications, especially when some distance offshore, in deep ocean waters, or on the seabed. The term ''subsea'' is frequently used in connection with oceanography, marin ...
geotechnical engineering, seabed materials are considered a two-phase material composed of 1) rock or
mineral In geology and mineralogy, a mineral or mineral species is, broadly speaking, a solid chemical compound with a fairly well-defined chemical composition and a specific crystal structure that occurs naturally in pure form.John P. Rafferty, ed. (2 ...
particles and 2) water.Das, B.M., 2010. Principles of geotechnical engineering. Cengage Learning, Stamford, 666 p.Atkinson, J., 2007. The mechanics of soils and foundations. Taylor & Francis, N.Y., 442 p. Structures may be fixed in place in the seabed—as is the case for
pier Seaside pleasure pier in Brighton, England. The first seaside piers were built in England in the early 19th century.">England.html" ;"title="Brighton, England">Brighton, England. The first seaside piers were built in England in the early 19th ...
s,
jetty A jetty is a structure that projects from land out into water. A jetty may serve as a breakwater, as a walkway, or both; or, in pairs, as a means of constricting a channel. The term derives from the French word ', "thrown", signifying somet ...
s and fixed-bottom wind turbines—or maybe a floating structure that remains roughly fixed relative to its geotechnical anchor point. Undersea mooring of human-engineered floating structures include a large number of offshore oil and gas platforms and, since 2008, a few
floating wind turbine A floating wind turbine is an offshore wind turbine mounted on a floating structure that allows the turbine to generate electricity in water depths where fixed-foundation turbines are not feasible. Floating wind farms have the potential to signi ...
s. Two common types of engineered design for anchoring floating structures include tension-leg and
catenary In physics and geometry, a catenary (, ) is the curve that an idealized hanging chain or cable assumes under its own weight when supported only at its ends in a uniform gravitational field. The catenary curve has a U-like shape, superfici ...
loose mooring systems. "Tension leg mooring systems have vertical tethers under tension providing large restoring moments in pitch and roll.
Catenary In physics and geometry, a catenary (, ) is the curve that an idealized hanging chain or cable assumes under its own weight when supported only at its ends in a uniform gravitational field. The catenary curve has a U-like shape, superfici ...
mooring systems provide station keeping for an offshore structure, yet provide little stiffness at low tensions."Floating Offshore Wind Turbines: Responses in a Sea state – Pareto Optimal Designs and Economic Assessment
P. Sclavounos et al., October 2007.


Observational method

In geotechnical engineering, during the construction of earth structures (dams and tunnels for example), the observational method is a continuous, managed and integrated process of design, construction control, monitoring and review enabling appropriate, previously-defined modifications to be incorporated during (or after) construction. All these aspects must be demonstrably robust. The objective is to achieve greater overall economy, without compromising
safety Safety is the state of being "safe", the condition of being protected from harm or other danger. Safety can also refer to the control of recognized hazards in order to achieve an acceptable level of risk. Meanings There are two slightly di ...
.Nicholson, D, Tse, C and Penny, C. (1999). The Observational Method in ground engineering – principles and applications. Report 185, CIRIA, London. The observational method was proposed by
Karl Terzaghi Karl von Terzaghi (October 2, 1883 – October 25, 1963) was an Austrian mechanical engineer, geotechnical engineer, and geologist known as the "father of soil mechanics and geotechnical engineering". Early life In 1883, he was born the first c ...
and discussed in a paper by
Ralph B. Peck Ralph Brazelton Peck (June 23, 1912 – February 18, 2008) was a civil engineer specializing in soil mechanics. He was awarded the National Medal of Science in 1976 "for his development of the science and art of subsurface engineering, combining t ...
(1969). This was in an effort to reduce the costs during construction incurred by designing earth structures based on the most-unfavorable assumptions (in other words, geological conditions, soil engineering properties and so on). Instead, the
design A design is a plan or specification for the construction of an object or system or for the implementation of an activity or process or the result of that plan or specification in the form of a prototype, product, or process. The verb ''to design' ...
is based on the most-probable conditions rather than the most-unfavorable. Gaps in the available information are filled by observations: geotechnical-instrumentation measurements (for example, inclinometers and piezometers) and geotechnical site investigation (for example,
borehole A borehole is a narrow shaft bored in the ground, either vertically or horizontally. A borehole may be constructed for many different purposes, including the extraction of water ( drilled water well and tube well), other liquids (such as petrol ...
drilling and a CPT). These observations aid in assessing the behavior of the structure during
construction Construction is a general term meaning the art and science to form objects, systems, or organizations,"Construction" def. 1.a. 1.b. and 1.c. ''Oxford English Dictionary'' Second Edition on CD-ROM (v. 4.0) Oxford University Press 2009 and ...
, which can then be modified in accordance with the findings. The method may be described as "learn-as-you-go".Peck, R.B (1969). Advantages and limitations of the observational method in applied soil mechanics, Geotechnique, 19, No. 1, pp. 171-187. The observational method may be described as follows: *Exploration sufficient to establish the general nature, pattern and properties of the
deposits A deposit account is a bank account maintained by a financial institution in which a customer can deposit and withdraw money. Deposit accounts can be savings accounts, current accounts or any of several other types of accounts explained below. ...
(not necessarily in detail). *Assessment of the most probable conditions, and the most unfavorable conceivable deviations from these conditions. Geology plays a major role. *Creating the design, based on a working hypothesis of behavior anticipated under the most-probable conditions. *Selection of quantities to be observed as construction proceeds, and calculation of their anticipated values based on the working hypothesis. *Calculation of values of the same quantities under the most unfavorable conditions compatible with the available data concerning subsurface conditions. *Selection (in advance) of a course of action or design modification for every foreseeable significant deviation of the observational findings from those predicted based on the working
hypothesis A hypothesis (plural hypotheses) is a proposed explanation for a phenomenon. For a hypothesis to be a scientific hypothesis, the scientific method requires that one can test it. Scientists generally base scientific hypotheses on previous obse ...
. *Measurement of quantities to be observed and evaluation of actual conditions. *Design modification in accordance with actual conditions The observational method is suitable for construction which has already begun when an unexpected development occurs, or when a failure or
accident An accident is an unintended, normally unwanted event that was not directly caused by humans. The term ''accident'' implies that nobody should be blamed, but the event may have been caused by unrecognized or unaddressed risks. Most researche ...
threatens or has already occurred. The method is not suitable for projects whose design cannot be altered during construction. The most serious blunder in applying the observational method is failing to select (in advance) an appropriate course of action for all foreseeable deviations (disclosed by observation) from those assumed in the design. The engineer must devise solutions to all problems which could arise under the least-favorable conditions. If he or she cannot solve these hypothetical problems (even if the probability of their occurrence is very low), he or she must revert to a design based on the least-favorable conditions.


See also

*
Civil engineering Civil engineering is a professional engineering discipline that deals with the design, construction, and maintenance of the physical and naturally built environment, including public works such as roads, bridges, canals, dams, airports, sewa ...
* Deep Foundations Institute *
Earthquake engineering Earthquake engineering is an interdisciplinary branch of engineering that designs and analyzes structures, such as buildings and bridges, with earthquakes in mind. Its overall goal is to make such structures more resistant to earthquakes. An earth ...
*
Earth structure An earth structure is a building or other structure made largely from soil. Since soil is a widely available material, it has been used in construction since prehistoric times. It may be combined with other materials, compressed and/or baked t ...
* Effective stress *
Engineering geology Engineering geology is the application of geology to engineering study for the purpose of assuring that the geological factors regarding the location, design, construction, operation and maintenance of engineering works are recognized and acc ...
*
Geological Engineering Geological engineering is a discipline of engineering concerned with the application of geological science and engineering principles to fields, such as civil engineering, mining, environmental engineering, and forestry, among others.M. Diederichs, ...
*
Geoprofessions Geoprofessions is a term coined by the Geoprofessional Business Association to connote various technical disciplines that involve engineering, earth and environmental services applied to below-ground (“subsurface”), ground-surface, and ground-s ...
*
Geotechnics Geotechnical engineering is the branch of civil engineering concerned with the engineering behavior of earth materials. It uses the principles of soil mechanics and rock mechanics for the solution of its respective engineering problems. It al ...
*
Hydrogeology Hydrogeology (''hydro-'' meaning water, and ''-geology'' meaning the study of the Earth) is the area of geology that deals with the distribution and movement of groundwater in the soil and rocks of the Earth's crust (commonly in aq ...
*
International Society for Soil Mechanics and Geotechnical Engineering The International Society for Soil Mechanics and Geotechnical Engineering (ISSMGE) is an international professional association, presently based in London, representing engineers, academics and contractors involved in geotechnical engineering. It ...
*
Karl von Terzaghi Karl von Terzaghi (October 2, 1883 – October 25, 1963) was an Austrian mechanical engineer, geotechnical engineer, and geologist known as the "father of soil mechanics and geotechnical engineering". Early life In 1883, he was born the first ch ...
*
Land reclamation Land reclamation, usually known as reclamation, and also known as land fill (not to be confused with a waste landfill), is the process of creating new land from oceans, seas, riverbeds or lake beds. The land reclaimed is known as reclamat ...
*
Landfill A landfill site, also known as a tip, dump, rubbish dump, garbage dump, or dumping ground, is a site for the disposal of waste materials. Landfill is the oldest and most common form of waste disposal, although the systematic burial of the wast ...
* List of publications in geotechnical engineering *
Mechanically stabilized earth Mechanically stabilized earth (MSE or reinforced soil) is soil constructed with artificial reinforcing. It can be used for retaining walls, bridge abutments, seawalls, and dikes. Although the basic principles of MSE have been used throughout ...
*
Offshore geotechnical engineering Offshore geotechnical engineering is a sub-field of geotechnical engineering. It is concerned with foundation design, construction, maintenance and decommissioning for human-made structures in the sea.Dean, p. 1 Oil platforms, artificial island ...
* Rock mass classifications *
Sediment control A sediment control is a practice or device designed to keep eroded soil on a construction site, so that it does not wash off and cause water pollution to a nearby stream, river, lake, or sea. Sediment controls are usually employed together with ...
*
Seismology Seismology (; from Ancient Greek σεισμός (''seismós'') meaning "earthquake" and -λογία (''-logía'') meaning "study of") is the scientific study of earthquakes and the propagation of elastic waves through the Earth or through other ...
*
Soil mechanics Soil mechanics is a branch of soil physics and applied mechanics that describes the behavior of soils. It differs from fluid mechanics and solid mechanics in the sense that soils consist of a heterogeneous mixture of fluids (usually air and wat ...
*
Soil physics Soil physics is the study of soil's physical properties and processes. It is applied to management and prediction under natural and managed ecosystems. Soil physics deals with the dynamics of physical soil components and their phases as sol ...
*
Soil science Soil science is the study of soil as a natural resource on the surface of the Earth including soil formation, classification and mapping; physical, chemical, biological, and fertility properties of soils; and these properties in relation to ...


Notes


References

* Bates and Jackson, 1980, Glossary of Geology: American Geological Institute. * Krynine and Judd, 1957, Principles of Engineering Geology and Geotechnics: McGraw-Hill, New York.
*Holtz, R. and Kovacs, W. (1981), ''An Introduction to Geotechnical Engineering'', Prentice-Hall, Inc. *Bowles, J. (1988), ''Foundation Analysis and Design'', McGraw-Hill Publishing Company. *Cedergren, Harry R. (1977), ''Seepage, Drainage, and Flow Nets'', Wiley. *Kramer, Steven L. (1996), ''Geotechnical Earthquake Engineering'', Prentice-Hall, Inc. *Freeze, R.A. & Cherry, J.A., (1979), ''Groundwater'', Prentice-Hall. *Lunne, T. & Long, M.,(2006), ''Review of long seabed samplers and criteria for new sampler design'', Marine Geology, Vol 226, p. 145–165 *Mitchell, James K. & Soga, K. (2005), ''Fundamentals of Soil Behavior'' 3rd ed., John Wiley & Sons, Inc. *Rajapakse, Ruwan., (2005), "Pile Design and Construction", 2005.
*Fang, H.-Y. and Daniels, J. (2005) ''Introductory Geotechnical Engineering : an environmental perspective'', Taylor & Francis.
NAVFAC (Naval Facilities Engineering Command) (1986) ''Design Manual 7.01, Soil Mechanics''
US Government Printing Office
NAVFAC (Naval Facilities Engineering Command) (1986) ''Design Manual 7.02, Foundations and Earth Structures''
US Government Printing Office *NAVFAC (Naval Facilities Engineering Command) (1983) ''Design Manual 7.03, Soil Dynamics, Deep Stabilization and Special Geotechnical Construction'', US Government Printing Office *Terzaghi, K., Peck, R.B. and Mesri, G. (1996), ''Soil Mechanics in Engineering Practice'' 3rd Ed., John Wiley & Sons, Inc. *Santamarina, J.C., Klein, K.A., & Fam, M.A. (2001), "Soils and Waves: Particulate Materials Behavior, Characterization and Process Monitoring", Wiley, *Firuziaan, M. and Estorff, O., (2002), "Simulation of the Dynamic Behavior of Bedding-Foundation-Soil in the Time Domain", Springer Verlag.


External links


Worldwide Geotechnical Literature Database
{{Construction overview