Features of forensic photography
Common types of photography such as creative and artistic photography give a different purpose than forensic photography. Crime scene photography allows one to capture essential aspects of the crime scene, including its scope, the focal points of the scene, and any physical or material evidence found at or from a result of it. With the use of crime scene photography, the context of the crime scene can be represented through a series of photographs, aiming to tell the whole story. Such photographs are used to capture the physical environment of the scene and its surroundings, in addition to physical evidence ''in situ'' and key areas of the crime scene (e.g., entrances and exits). There are also different techniques forensic photographers use, and the selection of what technique is used depends on the object of a photograph or the desired information one wants to obtain. For example, when trying to find footwear prints or stains on a camouflaged background, a photographer might find image subtraction techniques most helpful. However, if they were trying to analyze bite marks or fingerprints, they might use Alternative Light Source photography instead. Moreover, these photographs may be taken at various ranges depending on the content that is being captured. For example, physical evidence (e.g., footprints, wound details, trace evidence, etc.) may require close-up images, whereas the conditions of a room may only require overall and/or midrange photography. Photographs may also be supported with video recordings.Evidence photography
This form of photography is to provide images of the varying types of physical evidence and used as evidence in court, part of the case record, or by other investigators; typically of forensic findings during the analysis of various forensic disciplines. Forensic laboratories generally use infrared (IR), ultraviolet (UV), X-Ray, or laser radiation in addition to cameras and microscopes, to represent details that would otherwise be invisible to the naked eye. However, it is crucial that such details do not interfere with the appearance and condition of the evidence being documented. To ensure quality photographs, general evidence is documented under the following conditions: # The evidence is placed on a clean and distraction-free background (i.e., background paper, butcher paper, neutral countertop, etc.). # Even illumination. This can be achieved with two light sources of equal power and distance, placed approximately 45 degrees toward the evidence. # The camera should be placed directly overhead of the evidence. A ladder or scaffolding may be required for larger items. # Case number and scale are present in all photographs. # All sides of the evidence photographed # Close-up photographs of relevant details found on the evidence.Impression photography
Photographs of impressions such as fingerprints, footwear impressions, and tool marks require certain standards as they may be analyzed, compared, and searched through a large digital databases. For example, fingerprints are often entered into the Automated Fingerprint Identification System (AFIS). To meet the standards for such material evidence, they must: # Fill the frame with the impression to take advantage of the camera's resolution; # Include a scale for accurate calibration; # Have parallel planes of the subject, scale, and image; # Be in sharp focus and exposed correctly; and # Have even illumination of the area of interest. In addition, it is suggested that these impression images be recorded in camera RAW, although the photographer may decide to edit via Photoshop or another editing software. That will create a TIFF image, but increase the quality of the image.Mug shots
Mug shots are taken for individuals who have been charged with a crime, and once one is created, it is automatically entered into a master database with any existing information on that individual. To maintain consistent quality, standardized lighting, background, and distance is required. In addition to associating file information, physical features (e.g., hair and eye colour, facial hair, tattoos, etc.) are also associated and an appropriate photo line-up is required.Methods
All forensic photographs must contain three elements: the subject, a scale, and a reference object. Crime scene photographs should always be in focus, with the subject of the photograph as the main object of the scene. There should always be a scale or ruler present. This will allow investigators the ability to resize the image to accurately reconstruct the scene. The overall photographs must be a fair and accurate representation of what is seen. Any change in color may misidentify an object for investigators and possibly jurors. Preliminary overall photographs should attempt to capture the locations of evidence and identifying features of the scene, such as addresses, vehicle identification numbers and serial numbers, footwear/tire mark impressions, and the conditions of the scene. While the purpose of the overall photograph is to document the conditions of the scene and the relationship of objects, the medium range photograph serves to document the appearance of an object. In all photographs, a scale must be included, as well as a marker to indicate the identity of the object in question. Again, objects in medium-range photographs must be a fair and accurate representation of what is seen. Adjusting the photographic principles or lighting may allow the photographer to achieve this goal.Accuracy
If any evidentiary photographs are to be taken for use in a critical comparison examination at a later time, guidelines must be followed in accordance with the best practices of digital evidence. # The digital image must be captured in a lossless compression format. The two widely accepted lossless compression formats are tagged image file format (TIFF) and RAW. TIFF is a universal file type, whereas RAW files are proprietary based upon the manufacturer of the camera. Specialized software may be required to open and enhance a RAW image. # The camera must be on a grounded platform, such as a copy stand or tripod' In general, the human body cannot stop natural vibrations with a camera shutter speed slower than 1/60 of a second. Using a grounded platform will allow the subject matter to be in complete focus. # The camera shutter must be controlled by a remote cord or by using the timer mode. The simple action of depressing the shutter control will cause the camera to vibrate, losing focus on the subject matter. Photographers must also understand the principles of photography. When the photographers take the photographs itself, they must consider three components. These three components areDocumentation
Use of flash
External flash units are helpful tools when responding to a crime scene and for the proper documentation of evidence. The white balance of a photo flash unit is set to mimic daylight to ensure the proper color balance of the subject matter. The photographer must be mindful of the reflections that can occur due to the directionality of the flash and the position of the subject matter. To avoid flash reflections, the flash must either be removed from the camera body, creating an angle, or bounced off the ceiling.Equipment
The tools required to properly document the crime scene include: * Notepad * Clipboard and/or digital tablet device * Graph paper * Writing instruments (pens, pencils, markers) * Still camera with external flash and extra batteries * Video camera *Fit for court
The images must be clear and usually have scales. They serve to not only remind investigators of the scene, but also to provide a tangible image for the court to better enable them to understand what happened. Inclusion of photographs in a court case can not only impact the perceived veracity of evidence by jurors, but also the verdict and length of a sentence given. When photographs are used in criminal cases, especially gruesome photographs, the jury is more likely to give a guilty verdict as well as a harsher sentence. The use of several views taken from different angles helps to minimize the problem ofAnalysis of historic photographs
Concerns over scientific validity
A 2019See also
* Forensic engineering * Forensic materials engineering * Forensic polymer engineering *Notes
References
*Further reading
* ''Introduction to Forensic Engineering'' (The Forensic Library) by Randall K. Noon, CRC Press (1992). * ''Forensic Engineering Investigation'' by Randall K. Noon, CRC Press (2000). * ''Forensic Materials Engineering: Case Studies'' by Peter Rhys Lewis, Colin Gagg, Ken Reynolds, CRC Press (2004). * Peter R Lewis and Sarah Hainsworth, ''Fuel Line Failure from stress corrosion cracking'', Engineering Failure Analysis,13 (2006) 946–962. * Peter R. Lewis, ''Beautiful Railway Bridge of the Silvery Tay: Reinvestigating the Tay Bridge Disaster of 1879'', Tempus, 2004, . {{photography subject