Corinth Refinery is an oil refining complex in

Greece Greece,, or , romanized: ', officially the Hellenic Republic, is a country in Southeast Europe. It is situated on the southern tip of the Balkans, and is located at the crossroads of Europe, Asia, and Africa. Greece shares land borders with ...

, the largest industrial complex in the country with a capacity of , operated by

Motor Oil Hellas Motor Oil (Hellas) Corinth Refineries S.A. ( el, Μότορ Όιλ (Ελλάς) Διυλιστήρια Κορίνθου Α.Ε.) is a petroleum industry based in Greece focusing on oil refining and trading. It is a leading force in its sector in So ...

Facilities

Fuels production

Crude oil is processed in the crude

distillation Distillation, or classical distillation, is the process of separating the components or substances from a liquid mixture by using selective boiling and condensation, usually inside an apparatus known as a still. Dry distillation is the heating ...

unit, from which

liquified petroleum gas Liquefied petroleum gas (LPG or LP gas) is a fuel gas which contains a flammable mixture of hydrocarbon gases, specifically propane, propylene, butylene, isobutane and n-butane. LPG is used as a fuel gas in heating appliances, cooking ...

(LPG),

naphtha Naphtha ( or ) is a flammable liquid hydrocarbon mixture. Mixtures labelled ''naphtha'' have been produced from natural gas condensates, petroleum distillates, and the distillation of coal tar and peat. In different industries and regions '' ...

kerosene Kerosene, paraffin, or lamp oil is a combustible hydrocarbon liquid which is derived from petroleum. It is widely used as a fuel in aviation as well as households. Its name derives from el, κηρός (''keros'') meaning "wax", and was regis ...

, diesel and

fuel oil Fuel oil is any of various fractions obtained from the distillation of petroleum (crude oil). Such oils include distillates (the lighter fractions) and residues (the heavier fractions). Fuel oils include heavy fuel oil, marine fuel oil (MFO), bun ...

are produced. Kerosene and Diesel are further treated mainly in order to remove

sulfur Sulfur (or sulphur in British English) is a chemical element with the symbol S and atomic number 16. It is abundant, multivalent and nonmetallic. Under normal conditions, sulfur atoms form cyclic octatomic molecules with a chemical formula ...

thus complying with the required specifications and to produce

jet fuel Jet fuel or aviation turbine fuel (ATF, also abbreviated avtur) is a type of aviation fuel designed for use in aircraft powered by gas-turbine engines. It is colorless to straw-colored in appearance. The most commonly used fuels for commercial a ...

and diesel fuel respectively (both automotive and

heating A central heating system provides warmth to a number of spaces within a building from one main source of heat. It is a component of heating, ventilation, and air conditioning (short: HVAC) systems, which can both cool and warm interior spaces. ...

grades).

Gasoline production

Naphtha Naphtha ( or ) is a flammable liquid hydrocarbon mixture. Mixtures labelled ''naphtha'' have been produced from natural gas condensates, petroleum distillates, and the distillation of coal tar and peat. In different industries and regions '' ...

is treated to produce

gasoline Gasoline (; ) or petrol (; ) (see ) is a transparent, petroleum-derived flammable liquid that is used primarily as a fuel in most spark-ignited internal combustion engines (also known as petrol engines). It consists mostly of organic com ...

of a high octane number, eliminating the need for adding

tetraethyllead Tetraethyllead (commonly styled tetraethyl lead), abbreviated TEL, is an organolead compound with the formula Pb( C2H5)4. It is a fuel additive, first being mixed with gasoline beginning in the 1920s as a patented octane rating booster that all ...

to gasoline.

Hydrocracker complex

This unit is the most recent investment project undertaken by the Company the capital expenditure of which amounted to € 350 million completed within 2005. The operation of the

Hydrocracker In petrochemistry, petroleum geology and organic chemistry, cracking is the process whereby complex organic molecules such as kerogens or long-chain hydrocarbons are broken down into simpler molecules such as light hydrocarbons, by the breakin ...

enabled the production of the new clean fuels with low sulfur content according to the specifications of the

European Union The European Union (EU) is a supranational political and economic union of member states that are located primarily in Europe. The union has a total area of and an estimated total population of about 447million. The EU has often been ...

effective as of 2005 and 2009 (Auto Oil II). Furthermore, the unit contributed decisively to the improvement of the environmental conditions at the Refinery as the emissions from

Fluid catalytic cracking Fluid Catalytic Cracking (FCC) is the conversion process used in petroleum refineries to convert the high-boiling point, high-molecular weight hydrocarbon fractions of petroleum (crude oils) into gasoline, olefinic gases, and other petroleum prod ...

(FCC) were drastically reduced.

Fluid catalytic cracking complex

Atmospheric Fuel Oil is fed to the FCC complex to produce LPG, Gasoline, Diesel, and Fuel Oil. Parts of the LPGs are sent to downstream units and are converted into high quality gasoline components.

Lubricants production

Atmospheric Fuel Oil is also fed to the Lubes

Vacuum A vacuum is a space devoid of matter. The word is derived from the Latin adjective ''vacuus'' for "vacant" or "void". An approximation to such vacuum is a region with a gaseous pressure much less than atmospheric pressure. Physicists often dis ...

Unit. After a series of processes in order to improve properties of the

lubricant A lubricant (sometimes shortened to lube) is a substance that helps to reduce friction between surfaces in mutual contact, which ultimately reduces the heat generated when the surfaces move. It may also have the function of transmitting forces, t ...

s, such as

viscosity index The viscosity index (VI) is an arbitrary, unit-less measure of a fluid's change in viscosity relative to temperature change. It is mostly used to characterize the viscosity-temperature behavior of lubricating oils. The lower the VI, the more the v ...

pour point The pour point of a liquid is the temperature below which the liquid loses its flow characteristics. It is defined as the minimum temperature in which the oil has the ability to pour down from a beaker. In crude oil a high pour point is generally ...

cloud point In liquids, the cloud point is the temperature below which a transparent solution undergoes either a liquid-liquid phase separation to form an emulsion or a liquid-solid phase transition to form either a stable sol or a suspension that settles a p ...

, the final base lubes are produced and stored. Additionally,

asphalt Asphalt, also known as bitumen (, ), is a sticky, black, highly viscous liquid or semi-solid form of petroleum. It may be found in natural deposits or may be a refined product, and is classed as a pitch. Before the 20th century, the term a ...

can be produced from the Lubes vacuum unit, whereas the bottoms of both vacuum units are routed to the

visbreaker A visbreaker is a processing unit in an oil refinery whose purpose is to reduce the quantity of residual oil produced in the distillation of crude oil and to increase the yield of more valuable middle distillates (heating oil and diesel) by the ...

for further upgrading and production of fuel oil.

References

External links

Official Motor Oil Hellas site
{{coord missing, Greece Oil refineries in Greece Corinth